I tried this out with Armored Core 6, and it drastically reduced the ghosting. It was still there, but you really had to pay attention to it to notice. Also, my fps went from 144 to 288. I don't know if i was really getting 288 fps as my tv is 144hz.
Brother if you had a keen eye then you could see that when he scoped in then the other elements of UI like ammo, controls and stuff showed up and they were not shivering.
there's still ui ghosting in warzone 3, how do i fix it, my refresh rate is 144hz, rtx3050, i5 11400H, and my rtss is set to 72fps and lossless gives me 144fps but there's still ui ghosting
Personally I won't recommend, why bother using a tool which is ultimately gives you better performance without harming your card and using less consumption.
@@EzHardware yeah I've done that already. I have scaling set to Automatic too incase it was trying to draw it outside of my screen viewable space. Nothing pops up even though I can tell LSFG is working.
I have stutter issues on using this tool. Im using i5 6500 3.2 gtx 1080 16gb ram. (I know i have bottleneck issues but without using this tool not came stutter issue but low fps) if you know how to fix this issue
FG has its own overhead for making frames. have you tried ticking Performace under FG settings ? it reduces generated frame quality and greatly reduces resources needed to generate frames. All in all if you get over 40 50 base fps, you can do 2x generation with not much visible artifacting
@@EzHardware nope if I lock it on nvidia control panel the lossless gets capped at that same fps as control panel so I just been locking fps in rivatuner but it seems to work better without locking fps 2
@@EzHardware yes it matches exactly my msi afterburner fps if I lock it in nvidia the only way loss generated higher frames is locking fps through riva tuner
Sorry for the late response, maybe ypu figure it put, I had tha same problem and fixed it by running in windowed mode and using the configuration Ctrl + Alt + S , no the F1 or one key quick access, hope you try and let me know of it worked.
set anime4k at scaling,my friend tell this is working he wathcing warzone kills montage at 165 hz fps capped and tell its very smooth, actually it must work with films and anime
You can add games, Lossless scaling as a program in the amd software. Also get some sharpening using RIS. You can lock the framerate using FRTC or Riva tuner. Rest of the process is same.
If u are using an nvidia card , set the game to "Adaptive (half refresh rate)" vsync through nvidia control panel, also force vsync on lossless scanling app in NCP. to get less latency , use RTSS instead of NCP to cap the frame rate and turn on Ultra low latency mode again through NCP, more over turn off any double buffering, VRR support or option to "Allow tearing" in lossless scaling app. that should do the trick
@@jackfrost6268thanks, it kind of worked but only the lower part of my screen tears, also it tears only if i am walking on grass or a heavily textured floor
@@jackfrost6268brother I have a question that if my display is 144 hrtz and my game is running on 40 fps then how much I should lock the fps should I half the hrtz of monitor like 72hrtz with rtss when my game is only generating 40 fps only
@@m.m.3753 This tool is based on amds afmf technology which amd made open source. They aren't showing amd that they are fools because they are literally using their technology.
@@abraham9301 yeah i know, but still nice to See that other help the base of Gamers, who dont can offer an expensive GPU to get better gaming experience. Its still a far way to Go. But everything Starts with the First step. Go forward
@@m.m.3753 yeah they can improve it and make changes too it fs3 is useable by non amd gpus in games. These guys just used open source afmf and made it so non amd gpus can use it. In this case amd improving and making their open source technology better improves things for amd users and non amd users.
its stuttering if u triyng generate very much fps from your native perfomance, i mean if ur native gameplay(without dlss and fsr) is about 50-60 fps, the best way to work it must be x2 generating so set it to 100-120 fps ,actually u need to find the most stable fps count with straight line of frametime at msi afterburner and x2 it, if u have more than 120hz monitor u can creatye custom res at 120 hz and enable it,after it must be work like in video and ghosting fix@@butcherofhumankind
I was really interested in the program. But according to the information on the page, I realized that the developer not only ran away from his country at such a difficult time for it, but also supports the fascist regime of the Ukrainian government. Do not buy this product.
I tried this out with Armored Core 6, and it drastically reduced the ghosting. It was still there, but you really had to pay attention to it to notice. Also, my fps went from 144 to 288. I don't know if i was really getting 288 fps as my tv is 144hz.
its the frame gen magic
your game shows no UI, how can you tell that you fixed UI ghosting lol
I probably should have just played halo again but UI ghosting before was happening on scope and ammo count before changing settings 3:15
Brother if you had a keen eye then you could see that when he scoped in then the other elements of UI like ammo, controls and stuff showed up and they were not shivering.
@@gghhoosstt1233 I posted new video with more UI
there's still ui ghosting in warzone 3, how do i fix it, my refresh rate is 144hz, rtx3050, i5 11400H, and my rtss is set to 72fps and lossless gives me 144fps but there's still ui ghosting
bruh that 3090 could probably handle any fkin game on earth without frame generation
At double the power consumption and fan noise, personally if I don't feel a input difference with FG I don't really care it's there
Not true
Personally I won't recommend, why bother using a tool which is ultimately gives you better performance without harming your card and using less consumption.
🤣🤣🤡💀
I have an AMD gpu. What should i do?
How u fixed ghosting?? Can't see any solution??
Nice video!! But how to cap on AMD gpu??
If your gpu is at 56% when you cap to 50 fps, wouldn't it be better to uncap and play at 90, than playing at 100 with half fake frames?
If u got powerfull enough Cpu then yes
Are you getting 150fps now with the latest version?
I hate screen tearing though. Is this possible with vsync through Nvidia control panel?
Use RTSS scankine sync, it moves the tearing off screen
Yes, I found if you enable vsync to "fast". It will get rid of the problem. I did this for the game's shortcut, not LS.
Is there any chance you can fix the warping around the monitor when using frame gen at 30fps to 60?
30fps I think is below the min requirements
@@EzHardware it works though.
@@makandalp it works but there will still be issues so no there is no way to fix that because that's from using frame gen on too low of a baseline fps
@@abraham9301 is playing at 30 fps and reaching 60 fps with lsfg below minimum requirements? I am a bit confused 🤔
what is the blue measuring tool (name of app)
What api are u using ? and how did you locked the lsfg fps to 120?
im having too much ghosting my monitor is 144hz but the fps goes always above 180+
75hz monitor?
What if your refresh rate is an odd number. Like 75hz, i don't think frame limiters allow fractional value like 37.5
Even numbers only
you should always be at around 72fps to avoid fps fluctuations that can cause tearing for a single second
@@AncientGameplays Woah didn't expect to see you here, alright thanks for the suggestion. 👍
I can tell it's working with Palworld, however I can't get the FPS counter to display.
Toggle draw fps under rendering options in lsfg
@@EzHardware yeah I've done that already. I have scaling set to Automatic too incase it was trying to draw it outside of my screen viewable space. Nothing pops up even though I can tell LSFG is working.
game name ?
whts the point of frame gen if i want to see 200 fps and then we lock it at 50
because by having consistent 50 fps, the frame generator can receive consistent input, which means consistent output.
can u try this with the finals?
I have stutter issues on using this tool. Im using i5 6500 3.2 gtx 1080 16gb ram. (I know i have bottleneck issues but without using this tool not came stutter issue but low fps) if you know how to fix this issue
FG has its own overhead for making frames. have you tried ticking Performace under FG settings ? it reduces generated frame quality and greatly reduces resources needed to generate frames. All in all if you get over 40 50 base fps, you can do 2x generation with not much visible artifacting
If I cap fps in nvidia control panel it doesn’t work but capping in rivatuner it does know why?
wait, it doesn't work in control panel?
it should work, is the same
@@EzHardware nope if I lock it on nvidia control panel the lossless gets capped at that same fps as control panel so I just been locking fps in rivatuner but it seems to work better without locking fps 2
@@ChrisTheCasual did you toggle draw fps in LSFG that shows frame gen FPS number
@@EzHardware yes it matches exactly my msi afterburner fps if I lock it in nvidia the only way loss generated higher frames is locking fps through riva tuner
Does this work on all games? even rdr2? i tried it but i thought i doesn't work so i had to ask for a refund.
Sorry for the late response, maybe ypu figure it put, I had tha same problem and fixed it by running in windowed mode and using the configuration Ctrl + Alt + S , no the F1 or one key quick access, hope you try and let me know of it worked.
@@EnterpriseE96 Bought it. And it is working. Thank you.
What if I have a 200Hz monitor?
Yes
can this be used on video player ?
Ummm I guess but it shouldn't do anything
set anime4k at scaling,my friend tell this is working he wathcing warzone kills montage at 165 hz fps capped and tell its very smooth, actually it must work with films and anime
Hey how do I do this on an AMD gpu?
You can add games, Lossless scaling as a program in the amd software. Also get some sharpening using RIS. You can lock the framerate using FRTC or Riva tuner. Rest of the process is same.
@@sandipanplayz7282 bro when I lock frame rate to 30 with rtss then even after using lsfg frame rate is stuck at 30 any solution?
@@hpsgamerzoid580 same for me, did you find a fix or a way to make it work?
@@paranoweed4416 you can use half vsync and lock fps to 30 in game and then use frame gen
Fg works but how to get rid of screen tearing
about that... im not sure with FG on 120hz with 240fps is the problem
If u are using an nvidia card , set the game to "Adaptive (half refresh rate)" vsync through nvidia control panel, also force vsync on lossless scanling app in NCP. to get less latency , use RTSS instead of NCP to cap the frame rate and turn on Ultra low latency mode again through NCP, more over turn off any double buffering, VRR support or option to "Allow tearing" in lossless scaling app. that should do the trick
@@jackfrost6268thanks, it kind of worked but only the lower part of my screen tears, also it tears only if i am walking on grass or a heavily textured floor
@@chad.9938 the only way to reduce that is to not use any upscaler just set upscaling to off and play on native resolution + frame generation
@@jackfrost6268brother I have a question that if my display is 144 hrtz and my game is running on 40 fps then how much I should lock the fps should I half the hrtz of monitor like 72hrtz with rtss when my game is only generating 40 fps only
holy crap are you in a fish bowl lol
my dude using windows on top like a mac user 💀
K
Go go go, show AMD and Nvidia, that they are fools.
What?
@@EzHardware i mean Work hard on this little Tool to Push Framegenration Forward.
@@m.m.3753 This tool is based on amds afmf technology which amd made open source. They aren't showing amd that they are fools because they are literally using their technology.
@@abraham9301 yeah i know, but still nice to See that other help the base of Gamers, who dont can offer an expensive GPU to get better gaming experience. Its still a far way to Go. But everything Starts with the First step. Go forward
@@m.m.3753 yeah they can improve it and make changes too it fs3 is useable by non amd gpus in games. These guys just used open source afmf and made it so non amd gpus can use it. In this case amd improving and making their open source technology better improves things for amd users and non amd users.
Doesnt work sorry.
What happened?
So many stuttering. Feels like low fps (even tough i have 3080 ti) @@EzHardware
its stuttering if u triyng generate very much fps from your native perfomance, i mean if ur native gameplay(without dlss and fsr) is about 50-60 fps, the best way to work it must be x2 generating so set it to 100-120 fps ,actually u need to find the most stable fps count with straight line of frametime at msi afterburner and x2 it, if u have more than 120hz monitor u can creatye custom res at 120 hz and enable it,after it must be work like in video and ghosting fix@@butcherofhumankind
This is what happened to my game as well. I used it on rdr2, and whenever I activate frame gen, the fps dips down. I have 1660 super btw.
I was really interested in the program. But according to the information on the page, I realized that the developer not only ran away from his country at such a difficult time for it, but also supports the fascist regime of the Ukrainian government. Do not buy this product.
dont care what he supports its good software
@@waltuhwaltuhwhitewhite I downloaded the pirated version. On 1080Ti in Remnant II it works abysmally.
don't care dude
Don't care. Free frame rate.