Hyundai & KIA REAR WHEEL SPEED SENSOR REPLACEMENT
Вставка
- Опубліковано 30 вер 2024
- #abs #brakelight #speedsensor
If you have brake light or ABS light on, consider wheel speed sensor replacement.
Part No. 52751-2B100
The video is applicable to the
Hyundai Santa Fe FWD 2007-2019,
Kia Sorrento FWD 2010-2019,
Kia Sedona FWD 2011-2019,
Same as or similar to
Hyundai Sonata 2010-2019
Kia Optima 2010-2019
(Not applicable to any 4WD)
🔧 Tools used:
Bluedirver OBD scanner
Flat head Screwdriver
#2 Phillips screwdriver
Lug nut: 21mm Socket + Impact gun
Caliper: 14mm Socket and offset wrench
🔧 Basic shop tools:
Floor jack and jack stands
Torque wrench
Power tools
As others have said so well, excellent video. In my case, I would have probably spent around $400, but even then it would have taken two months for an appointment. The clarity of this video allowed me to brave the repair myself and I couldn't be more pleased with myself. (lol) Cost: $84 for diagnostic report, $17 for sensor from Amazon. Now I look forward to saving $84, next time, by using my new diagnostic scanner ($98.99), and @chrisfix will be my first stop every time.
Such a great comment!! Thank you!
Can you tell us what kind of scanner did you buy? Thanks!
@@ricardoampie4194BlueDriver. Its $99 on Amazon
Great video and info 💯🤙🏽 thx
Thanks so much for the information ❤❤❤ The dealer wanted over $1000.00 for the same repair. I did it myself for about 90% less money and completed it all in less than 2 hours. Many thanks, my friend 😇🙏🏽
Glad it helped
Excellent video! You saved me over $400 in Dealer repairs costs by showing all the steps so clearly.
Glad it helped!
Saved me a ton from the dealer. Had to remember to disengage the parking brake to get the rotor back on. Excellent video!
Glad it helped!
Echoing all the other comments, but EXCELLENT video!! Straightforward and to the point without being confusing or leaving anything out. New sub for sure. And thank you!
Good video… I have been looking for a video like this. Now I am wondering if I open up the speed sensor and wipe it down to perfect clean will it work again!
Glad it helped!!
2014 Santa Fe. Saved hundreds of dollars for the price of a sensor, offset wrenches, and a Saturday morning. Thank you sir.
nicely done video. very informative. thanks man
Thanks for the great video. This fix worked great for my 2016 Hyundai Sonata. The only differences are: do not need 14mm angle wrench and the emergency brake backing plate needs to be removed. Thanks again!
Good to hear that!👍
쇼츠에서는 디스크에 무엇을 바르던데.. 그게 뭔지모르겠네요
브레이크 클리너를 뿌리는걸 보신거 같네요.
새제품에는 운송과정에서 녹슬지 마라고 기름코팅이 되어있는데 클리너로 닦아주고 장착한 겁니다. 안바르고 장착해도 하루 이틀운행해도 없어지긴 합니다만, 그동안 밀리는 브레이크를 경험합니다
I have a 2012 Santa Fe. Your video was almost exactly on how to change the abs sensor. I was able to to do it and saved $350. Thank you.
SN: The 2012 Santa Fe doesn't require an offset wrench because you have enough room to do it with a socket wrench.
Thank you for the video. Helped me a great deal on my 2015 Sonata Limited. Only the right side was bad, but replaced both sides. If one side goes bad the other side is right behind, right? Didn't need the offset wrenches as bolts were very open, but now I have a set so still a win. Bought 2 sensors from Hyundai dealer in NC, $53.33 for both with shipping.
That was good deal. Thank you for sharing your experience!
Thank you! Just swapped out mine on a 2017 Kia soul. Very clear instructions
Well done, Sir. I had this replaced at the dealership, I thought my car was still in warranty but ti was out by a couple of months ended up costing me $260 or so. I have a code reader so if it happens on another wheel, I'll do this on my own. Thanks for posting this.
they just quoted me 659, doing this shit myself
I don't think $260 was a bad deal. Thank you for sharing your experience.
Is it possible to remove those bolts by manual wrench instead of electric wrench?
You do it so easy great job my friend
Saw other UA-cam videos on this... By far this is the best one with the best lighting/video angles.
Dealer quoted me $550 USD for this fix. Sounded way too high for me.
On my 2018 Hyundai Santa Fe Sport replacement, removed the entire caliper bracket along with attached Caliper (squeezed a little caliper cylinder w clamp to ease removal/installation of entire Caliper Assembly).
The use of the offset 14mm wrench - bought a set for this fix - to remove the lower bolt on the caliper bracket was invaluable, else it would required more disassembly in the rear suspension, something I was not willing to do.
Thank you for sharing your experience. I haven't used an offset wrench since this one.
Great video and great job!!! The video helps the consumers to know what will the dealer do with your car. 😅
Hello, after I replace the front passenger axle of the Kia Sedona 2012 now I have the abs light on. Any suggestions??
I suspect that the speed sensor wire was damaged while replacing the axle.
Your ohmmeter test is inaccurate, a good sensor has a very high resistance between the 2 pins in one direction, open when reverse leads.
Thank you for the correction!
Thank you, your video saved me a ton of money! It was an easy project as it only took a couple of hours with 4 beer breaks.
I'm glad to hear that. Thank you for sharing your experience.
Very informative video 👍🏼
Good video, just one correction needed, all you have to do is push the clip in and the plug will release when pulled. I looked up how to change it in Mitchell since I found the sensor separately at one of the parts stores. Mitchell said to remove the front wheel and the back seat. I think that comes from Hyundai. What? Remove the front wheel and rear seat back, that's insane. It still never mentioned how to separate the sensor from the hub. I figured I would have to pull the hub to do it but wanted to see if there was a way to pry it out without removing the whole assembly. Thanks.
Good to know! Thank you for the correction.
Great video. Just one suggestion: measure the resistance in the beginning of troubleshooting to eliminate wiring issue as a potential problem. This could save time.
Good point! Thanks
Replaced my sensors and lights remained on. My new sensors are reading 20m ohms. Is that right? What should the actual ohm reading be for rear tire sensor? Does it have to be around 240ohm?
What was error code number?
My new sensor was reading 400kilo ohm.
Awesome video easy detailed instructions for the do it yourself mechanic
Thanks 👍
I am about to replace mine on a 2017 Kia Sorento. Dealer wanted $750. I saw your video and said I’ll try to do it myself. I’m confused as to where to align the sensor like you said when putting it back on tho. Is there a groove indicating where the sensor should be?
All you have to do is remember the direction of the connector when removing it.
Would this be the same for a 2015 Sonata 2.0T?
No, Sonata has probe type sensors. Not cap type. You can replace probe without removing the hub.
Thank you so much for this video! Really helped me out!
Glad it helped!
great job man great video short to the point def a future in this
Thank you for your feedback!!
Sir how about if the scanner said wheel speed sensor/performance/intermittent are the result. What will we will do? We will replace the speed sensor ?
Search code number like C1208. Description from scanner is not very accurate. Find out DTC code and search possible reason of that code.
best of all was the quality of the video at every angle. "a big plus" So, there is not an easier way to follow. Thanks.
Glad you liked it!
Hi where did you get the manuals? I am looking for i30.
If you are replacing rear wheel sensor on a front-wheel vehicle, it would not be much different from the video. The front wheel sensor is a different story because it is shaped like a stick rather than a cap.
I did this repair on an i30 but now I have a red exclamation warning sign on my dash board do you know what the cause or issue is?
It seems to be a brake-related warning. Scan the code with OBD tool.
Thanks man! When you say align the connector position, is there a mark to line up or something?
I couldn't capture it in the video. Just point the connector towards a place where the bolt spacing is wide. The hub has no top or bottom.
@@_yamech7533 Thank you so much my friend!
Hi Chris, may I know what brand or model scanner u use on this video?
Hi. I am not ChirsFix. I am fake of him. LOL. It was BlueDriver. cost about $99 back in 2020.
Excellent. This was a big help in replacing the rear wheel speed senser in my 2017 Sorento (FWD). There was only one minor difference with accessing the brake caliper bracket bolt, and I did not require an offset 14mm wrench. My adaptive cruise and front camera also didn't work because of this failed senser. I bought a KIA OEM senser (
I’m glad to hear that! Thank you for sharing your experience.
Boa noite amigo, acredito que estou com o mesmo problema. Tenho um Kia Sorento, e ascendeu a luz do sistema DBC no painel e não apaga. O problema no seu carro era esse?
On my 2015 Hyndai Tucson, the ABS started to work without an error, but the system does not show an ABS error. Do you know what could be the reason?
If there is no ABS error, it is resolved, isn't it? What error are you expecting?
@@_yamech7533 The error is not shown on the display, but the ABS continues to activate every time you brake.
It seems not Speed sensor issue. Check Brake Control Module
I am curious what part inside the original sensor failed?
I haven't teardown it, but as the resistance was too high, it is suspected that inside coil has been disconnected.
Very good demonstrative repair video with some quality background information about how the sensor functions. Thanks man! Liked and Subbed.
I have a question. Does this works on Kia Sportage 2014 as well? Got same DTC code. But cannot find bearing sensor anywhere for my Kia?
As mentioned in the video, dealership parts center do not sell sensors alone. Search for wheel speed sensor that fit your car model on Amazon or eBay.
This video is only for FWD. not 4WD
@@_yamech7533thank you for your time and good answer!
This was great. Other videos say you have to replace the bearing along with the sensor because they come as one unit. Which is $50 vs $10 per wheel. Love that he showed how to test that the sensor is bad too. My sensor ohm'd out ok but when a magnet was placed next to the sensor the ohms did not drop toward 0 (Replacing the sensor fixed my problem).
dam ill be driving without abs for awhile, it's -35 in canada right now, I'll wait till spring. Good thing I can drive without abs lol.
Extremely well made video it is obvious you spent a lot of time making it! A perfect tutorial easy to follow step by step the tools needed ! Thanks! ( can you make one on raising teenagers please 😞)
Could you check please!
Can you possible decomposition sensor only like 3:13" Fig?
I don't fully understand the question. The black cap is the sensor itself. It's just one piece of plastic. If you have any more questions, feel free to leave a comment at any time!
@@_yamech7533 Thanks for your quikly answer.
I will check it again.
What diagnostic app are you using
Its Bluedriver. Paid $99 from amazon. You can read all the code but programing.
Good job
Wow
Its excellent video you give me an idea for my sta fe 2014
Thanks for the electrical specifications.
Thank you! Good information!
Our pleasure!
FYI my 2017 Sportage used all SAE bolts on this job, except for the 19MM wheel nuts - ??? Great vid, thank you.
Most of bolt sizes are compatible. Perhaps it would have been possible to use metrics. In Korea, metrics are the standard.
많은 도움이 되었습니다
북미에 사시나요? 자가정비에 도움이 되었길 바랍니다.
excellent - well done and I appreciate the tips.
BEST INSTRUCTIONAL VIDEO EVER 💯
⭐️⭐️⭐️⭐️⭐️
Hey gudday I watch your video about abs brake hill descent light does not comes off. It is suitable also on kia sportage 2019 cause mine lights off does not comes off. Just asking I'm from the philippines
If it is Front Wheel Drive vehicle, Yes. it will be similar to Hyundai. But make sure OBD2 Error code before replace sensor. ABS light may be turned on for other reasons.
Satisfying vdo. Thanks
Great video! Thank you very much. Has anyone tried to replace that sensor without removing the bearing from the vehicle? It looks like it could be possible
It looks like it's going to be difficult because it's so deep.
I have a 2014 Santa Fe limited V6 FWD. Mechanic said ABS code was for rear wheel speed sensor but for this model I need to replace the whole assembly. How can I confirm if that's true?
That is true. Dealers don't distribute sensors alone. it is delivered only as an assembly. The method in my video is a shortcut. This is not an official repair method. Replacing whole assembly is manufacturer’s recommended method.
Excellent Job! you get a AAAAA+++++++ I will be replacing my in the morning! Thank you for not over talking! you get straight to the point, and i love that!! I will Subscribe to your channel
Thank you for watching. I wish you made it!
Wow I got quoted $1,000 to replace both wheel hub assemblies!! Thank you
I think $500 a side is an average price. But it still seems overpriced.
Hi friend, where can i buy that wheel speed sensor and abs sensor
For a kia sorento 2014 2.4 gdi
It is Front wheel drive?
Search 52751-2B100 on eBay.
I wish I could give you more thumbs up. I bought the rear sensor for my wife's 2017 Tuscon.... but it's the wrong part. EVERY single part search is the exact same wrong part. (wiring harness with plastic single bolt plug sensor). What I see when I pulled the wheel off is this very thing you're replacing as the only sensor on there. I have no idea why ours is different than every single sensor listed for this vehicle. I wonder if there was a revision or something mid-year for our model or something where this sensor was changed for the one in your video. Well... I can take back the $125 part, and purchase the $20 part now. Thanks so much for this video!
Thanks for sharing your experience. I can feel how hard it was. The probe type sensor is for the front wheel only. Cap type sensor is used on rear wheel and it is sealed with the wheel bearing. Thats why its soled separately in official parts shop. Good luck.
Good job great video....i can change my hyundai rear sensor. new subscriber and thank you.
Awesome! Thank you!
I don't usually comment, and sometimes prefer not to listen to people with strong accents that my be difficult to understand but this guy was excellent! Excellent, detailed instructions, excellent video work, excellent tips, everything was great. Thank you.
Thank you for the wonderful comment. I hope it was helpful.
Anyone know if this part would be relevant for a AWD Sante Fe? All the parts say 2WD
AWD sensor does not look like "Cap". It will look like probe.
very helpful video. Saved me $500+ from dealer fees. Bought the part online for $30. Thank you sir
Glad it helped. I guess five hundred dollars is the standard. All dealers across the United States charge the same rate.
Great video I've got a Hyundai ix35 and I've changed the Driver shaft and maybe I've done something to the sensor because it feels like the the brakes are on
You may need to check wheel speed sensor and wire. If you did not remove sensor before take you hub bearing, sensor wire could be damaged.
Tq bro for upload this video.saved $500 😂
Welcome 😊
Awesome
Thanks a lot
Dealer quoted me 450 for one, 700 for both. This video will help me do the job myself. I bought the genuine KIA part (20 bucks! on ebay), and an 8 dollar offset box end 14mm wrench. Thanks for the clear, concise step by step video! BTW ... Auto Zone diagnosed the problem even to which wheel sensor was causing the lights to stay on for..FREE!! Only thing I may do in addition is to put a little silicone caulk at the outer edge of the part before tapping it all the way down. KIA had a service bulletin on this 7 years ago for this car, and it said it will help keep water out which can wreck the sensor.
I did this repair today. Went well after watching this video several times. On my 2013 KIA Sorento FWD I didn't need the offset box end wrench. But, after I finished, I started the car and the warning lights (ABS, ESC, downhill assist) still came on and stayed on. Rats! I pulled the car up and down the driveway. Still on. Disconnected the battery for about an hour. Nope..still on. Then, went for a drive around the block and the lights all went out! YAY! So...in my case it was different from the video which showed them going out immediately. So, if this happens to you, don't despair until you drive the car and spin the wheel fast enough for the sensor to pick up the signal. Thanks Again for the clear video!
Thank you for info!!
What is "Fake Fix"?
I have a 2013 Santa Fe Sport with exactly the same problem, and this looks like something I can handle. I do not want to give the dealer a dime. Great job with the video...I'm thinking I can do this...
I am imitating ChrisFix.
I will make video that shows how I put it in practice what I learned from him. That’s why I named my channel FakeFix and I want to be a second biggest DIY UA-camr following him.
Thank you for leaving a comment. I believe you can make it.
대단합니다
500달러라고해도 저는 맡길듯요
작키도 obd진단기도 옵셋렌치도 없지만
있다고해도
내가 차량을 분해조립후
정상적으로 굴러갈지에 대한 확신이 없기때문에...
처음시작이 어렵지 한두번 해보면 자신감도 생기고 감도 생기게 되더라구요. 이젠 타이어 교체빼고 카센타를 가본적이 없네요. 엔진이 망가지는 거만 아니면 앞으로도 계속 집에서 할거같아요. 댓글 감사합니다
Thanks Man, you just make me save $$$$$
They had a RECALL 949
RR WHK SPEED SENSOR INSPECTION/REPLACEMENT in 2021. Have brought my 2014 Sante 4x to the dealership and still same lights on for 5 years AND did the recall! They never fix the issue. Codes showing C1206 rear lh open/short, C1209 rh lh open short and C1210 rh range performance intermittent. Supposed to have this looked at again next week, Hyundai corporate making empty promises though. Please help. After seeing this wondering if I can get a $20 to $100 part and bring it to a local mechanic. These greedy dealers are going to want to change me that just for a diagnosis. Again FIVE times bringing it in even during the warranty and it was never fixed . Any advice? Thank you so much.
If it happens intermittently and it happened again after the replacement, I would suspect a faulty connector or wiring.
if you have experienced mechanic, they can read raw data from sensor with the advanced OBD2 tool and analyze them. wish you good luck.
@@_yamech7533 Bad sensor. Both got replaced. Light has been off for a month now. Thank you
Thanks for the video
wow.... you are great partner
Very helpful Video 😊
Thanks for this video. Just replaced both rear sensors on my ‘17 Tucson. Worked great! 👊
Glad it helped!
This video saved me some money. Thanks to you I did not buy the hub just sensor. Issue solved.
Good to hear that and thank you for leaving a comment!
hello. where did you buy your computer to scan?
It is Bluedriver OBD2 scanner. You may not need same model. Cheaper scanner works find for beginners.
How much torque does your ratchet wrench have?
PITTSBURGH 1/2 in. Drive 10-150 ft. lb. $21.99 from Harbor freight. It covers most of the job.
Great video,thanks so much
Glad you enjoyed it
Great video, which scan tool are you using?
Its Bluedriver($120). Its easy to use but overpriced. If you need to scan the code only, FIXD($40) can be a great option.
Excellent video. I can do the task very easy.
Glad it helped
Thank you, you are doing a great and profesional job and tutorial there.
Hello from indonesia Sante Fe owner.
Thank you for your feedback!!
Hello , what is the device for diagnostic errors that you us please, thank you for answering , and your help for this video
It is called Bluedriver. You can find it on Amazon.👍
@@_yamech7533 thank you 👍👍
Is this the same part for my 2016 Kia Sorento?
No. Part that shown on this video is for 2007-2017Hyundai Santa Fe 2WD
and 2011-2015 Kia Sorento 2WD.
I believe replace procedure will not much different with 2016. Just make sure your part number.
Wow ordered 8$ sensor going replace on Sorento dealer asking $670 for weel hub assy Thanks for the video
Glad it helped. $670 is is the highest among the comments. its under 1h job for normally trained technician.
@@_yamech7533 Bev Smith Kia of Fort pierce Florida they smoked good tobaccos!
How soon do you have to change it? Is it safe to drive when it comes on. and what causes it.
This is not a consumable item, so you don't need to change it unless it's broken. If the ABS warning lamp is on, the vehicle may lose control in an emergency braking situation.
good work bro
What is the brand and model of that code reader?
It is BlueDriver OBD2 scanner.
What is the actual part# ? i am having a hard time finding it
You can see part number in my video 01:00. Goggle 52751-2B100QQK.
Thanks 🙏
완전 쉽게 쉽게 하신다
이번작업은 난이도가 높은 작업은 아니었네요. 댓글 감사합니다.
great
Thanks!
How did you know which sensor has the error?
You need to scan OBD2 error code. 00:00:47 I got code number C1208. It means “Rear Left Wheel Speed Sensor Invalid Or No Signal”. Each sensors has different error codes.
Help, only my ESC is on and it LOCKS up my rear wheel brakes. I believe both of them the dealer failed to fix it for me
You may want to check brake line such as caliper, ABS module and pipe line. ESC failure can cause wheel lock up, also you have to consider that lock up wheel can cause ESC light on.
@@_yamech7533 Can the sensors cause a signal error that makes it lock up too? it is strange why it locks up two wheels at the rear.... the mechanics already changed the lines. One forum mentioned even steering sensor can cause it
Sensor can cause ESC error but will not lock up. Stability control program use a lots of information like steering wheel angle, wheel speed, gas pedal, brake pedal, etc to determine vehicle maneuver.
@@_yamech7533 Good to know thanks for the heads up