7.3 F250 DIESEL BUILD - Upgrading to a Facet Electronic Fuel Pump!
Вставка
- Опубліковано 5 сер 2024
- The Diesel Build Continues! In this video, Christian upgrades to a Facet Electronic Fuel Pump from the stock mechanical setup. This video should serve as a guide for anyone else looking to do the same.
For UA-cam Business Inquires:
Wingsworldprod@gmail.com
Follow Us!
Instagram:
@Jake_The_Wing
@TheChristianEwing
@Wings_World_Official - Авто та транспорт
A PowerMaster 9050 will help hard starting immensely, even with air intrusion issues.
I'm planning on installing this pump (why I'm here, duh) but a modern high-torque, high-revving starter is an amazing improvement as well. The old ones just don't turn fast enough, especially when you compare the cranking sound to, say, a 6.0 PowerStroke. The 9050 cranks at about that speed, and can fire off the most worn-out of IDIs in less than a second from cold.
I'll pass on my knowledge of these idi's. The power difference you feel and may hear in the engine running, is due to the electric fuel pump providing higher fuel pressure (also providing a more constant flow), which in turn actually 'slightly' advances the timing, these engines love it though (just don't go too far on timing) you'll know it when you do. The advanced timing also of course helps with power as you were stating, you're not trippin. Haha, good video though.😎
Will the advance in timing mess anything up or Will the truck be fine?
I couldn’t agree more, coming from another idi owner and lover.
You and your brother are alway making the most helpful videos. Appreciate it
Glad to see more content on this truck :) Still want that front suspension set up for my F-350. Just love it!
Bro I really enjoy your videos. Shout out to you Dad for teaching and encouraging them skills. So cool that you guys share common intrest.
Thanks for the video. For sure answered all my questions before hand.. I have turbo idi crew cab that needs to get on the road.
Thanks for this video very informative
Great truck👍maybe try checking the glow plugs for that hard starting but that new pump will do a big difference👍
Well done I need to do this to my 89 F250!
Thanks for this helped me a lot
Sick. Kibbe, Terra, AND Wingsworld. A day of new prerunner videos.
Love the diesel build series. Can’t wait for more videos.
Yeah. Great stuff, getting ready to R&R it's heart (HG) Then address the fuel (93 4x4 7.3 full sidewinder kit, also seen another on these re Duralift and him switching to a 40222) good lookin y'all 🤘🏼
Awesome video. Yeah there our no good videos covering this topic so great job. Mane you have to upgrade your alternator to a 3g look it up I promise you’ll want to do it. You obviously go for the best so you’ll figure it out good luck and nice truck.
Badass truck!
Idi for the win
Thats the one i got in my IDI . Thermoking units use those, very good pumps but, i got my pump right after the fuel tank in the chassis cause is better pushing fuel ,not pulling. I got my pump for over 3 years and remove the canister to clean and put back on..
Sick video bradah! 🤘😎
Your leak is at your main fuel hard line that comes from your water separator. The rubber seal at the engine side shrinks up and your fuel drains back over time. The seal can be replaced using a like sized piece of fuel line, or replace the whole part. Like $26.
see on my 90 idit i put a like 00-03 psd rail pump on it and that made a huge difference. then a year later i pulled the idit out and stuck in a 12v cummins. still using the psd rail pump tho.
Glad I found you, just got an 88 f250 7.3 idi, same color as yours.
Same lol
so far I been running some kind of diesel fuel pump on mine the oem is still there and the 12 volt pump just runs after I wasn't the one who did it someone else did before i got it. It doesn't leak any fuel or have any hard start it literally just fires right up. I got a second cheapy fuel pump as my backup laying around incase it goes bad but I drive it quite a bit this year it's a 5-9 psi pump.
Here's a couple more upgrades for your truck from and a 86 f250 4x4 6.9idi owner. 1. Get the K&N filter for that truck from Oriellys, it will allow you to turn the injection pump up a couple of (flats) and get a few more HP with out smoking everybody out. Basically keep turning it up until you notice a slight haze out of the tail pipe under hard exeleration. You will need to make a new top cover as the K&N is taller then the stock one, I made mine just big enough to seal the filter down and the stock bottom section became basically a splash gaurd. 2. Get some type of over drive for the c6 (gear vendors) granted i don't know what gearing you have in the axle. But in direct comparison b/w 2 86 f250 4x4 6.9idi with 4.10 gearing. Mine with a swapped ZF5 (bw 4spd to ZF5) stick shift to my buddies c6 auto. I was getting 14mpg to there 8 to 9mpg.
Unless I missed it I would advise an in-line fuse to power the pump. If that pump short circuits and draws 50amps your wires could burn and catch.
The lift Pump being mounted lower by the tank will help all air to exit and help the pump not to work as hard. It will also be a more reliable setup. Thanks for the video brother. Not too many people post about this issue. Keep up the great work 🤙
That’s true pumps like to push not pull
@@noka55that’s not always true. These are called DuraLIFT pumps. These are pulling pumps.
I added one of these on the passenger fender, mine is turbo charged and have noticed that between the water separator and fuel filter it drains the bowl and leaves some air, to remedy this I plan to add a second pump on the frame rail to boost the pressure through the water seperator, seems to not have enough suction and maintain at least 5 psi pressure
The electric fuel pump is just masking other issues with your system. You definitely have air intrusion and other fueling issues. You should put that pump closer to your tank so it doesn't have to work so hard. It will burn up sooner from being overworked.
Thanks for the idi content!
Alternator upgrade 92 e350 130 amp 2 groove pulley
Plug off the 1/4 inch return line from return rail to filter housing
Check your glow plugs and while you're replacing them check your compression
Nice install! Time for a 3g alternator swap
I’ll have to look this up 🤘🏼
Thanks for this! What did you use to cut the fuel rail??
About time
You should add a inline fuse on the main feed to the relay, should there be a short or a failed pump, you don't want it to start a fire. Guessing around a 15 amp, depending on what the pump draws.
15 amp is to much I have a facet dura lift 40222 9-11 psi so pretty the same pump and I used a 4 amp fuse because it recommended a 3-5 amp fuse.
So, why did you put your remote reservoirs which are used to help cool the shock oil over the engine where they will get heat soaked? I like the lift pump setup. I might use this similarly for my 7.3 PSD, with the addition of a higher pressure pump in line to get to the ~60 psi I need for the fuel rail.
there is a starter off of a year of a power stroke I can't remember what year that fits these engines that spins it over a lot faster and helps it to crank
Thanks for the video. What is the part number for the male side of the pumps electrical and where did you find it. Thanks
I wonder if it has the same rules as like a holley, like holley would say it mounted to high above fuel levels. 🤔
About to do this duralift mod on my 7.3 idi that the mechanical lift died on
Hold that thing down the whole time when u are trying to bleed it to the filter. Then u can Crack the lines at the injectors. But that b pump you probably don't need too.
Have you done a compression check on the truck? When you showed the video of it starting after the fuel leak back you could hear the starter speed up in a area. This could be indicative of a loss of compression in a cylinder.
Awesome idea, one question, how many psi is the electric pump to compare to existing mechanical pump.
By the way I have the twin to that truck in Kansas it's getting a power stroke this spring
Need to do the 1g to 3g alternator conversion. And get rid of the battery light and the shit 1g alternator. Love the build though.
Did y'all get the slow starting issue figured out. How well has the faucet been doing on it so far
Have you tried the "Ford Truck Enthusiast" website.....I know they sure helped me with my 6.0 liter.
So I did this to my 91 almost exactly like you did, I did it a couple of years ago after reading about it in a idi group I googled, my problem is that I dont really get enough fuel, it's fine for first, second and third gear but fourth is a little iffy and fifth is a no go I can step to the floor and not get enough fuel, can you maybe think of a reason why?
Love the idi content. You still planning on putting a turbo on it?
Have a idi with a air dog 110 pump from a 12v dodge with a rnd idi 110 injection pump
I have an extra turbo kit with a rebuilt turbo for sale if you guys want it, I’d like to see this truck back on the channel
Check your return lines from the injectors. Any little leak will cause air to get in and cause you grief.
agreed, also a lot of people have issues with air getting in the fuel filter base. oring goes bad on the line or the heater.
this is a bandaid for that. a really good one.
Curious as to in warm climates (Im in FL)you can omit one battery as you can with the 12 valve. Anyone know?
Would it be possible to have both the mechanical and the electric pump both in with the mechanical there as a backup? Reason I ask is because I had the alternator belt shred on me in the middle of nowhere and when I shutdown to refuel I was able to crank it back up and drive it back home (albeit in 1st and 2nd gear on the C6 transmission).
Drainback.
Park facing downhill or replace your return line spring check ball
I have to keep hitting that valve to get air out any idea why its doing that each time on cold start
What's the part number for the plug on the pump? Having trouble finding it
How’d you install the new shifter?
When are you guys going to turbo it
How many mpg do you get and did it change with that manual shifter
Do you need to remove and block off old pump?
Love the shifter for the C6 .
On all of these old 30+ year old trucks every piece of rubber hose o-ring olives caps need to be replaced going back to the tank .
The fuel heater should be eliminated and hole plugged .
The shower head in the tank should be replaced or eliminated with a straight piece of tubing .
Does it get better fuel miles?
What is the advantage of upgrading your fuel pump?
What’s the size fuel line ? I seen different people do different things
Hey man , I know this video is old but I have this same truck and have a few questions about yours . What shock mounts are those and where can I get them?
Hard starting???? Try Gear reduction started from Power Master. Turns it over quicker making cylinders heat up faster equalling faster start.
Is she still running good? Did the pump work out?
Will this work on a powerstroke
winter shifter I hve seen this in another video but didn't know what the deal was, still don't.
What year is your truck? I’ve got a 92 7.3L IDI Turbo Diesel. Will this whole kit work with my truck? Also, what did you use to seal all the fittings? Thanks man!
How do u put a manual shifter on a C6
Did you bypass the mechanical fuel pump?
Let your glow plugs cycle all the way if your glow plug relay starts clicking on and off you know you have a bad glow plug or glow plug wires.
👍💯
7:58 looks like a gnarly crimp in that hard line. Might be your air leak...
Can you send the relay diagram ?
Fuel pump needs to be mounted as close to the fuel tank as possible and as low so to ensure good fuel priming. There is a reason that fuel pumps are located on the frame rail or in the tank. Also only run a paper air filter element on a diesel. Oil soaked rag filters work only on a gas unit, if on a diesel, there is a bad risk of dusting(polishing) the cylinder bores and then you will have a poor starter and oil burning.
The Facet Duralift pump is capable of 120 inches of vertical lift; it's designed to pull and is perfect for this installation.
People need to go do their damn homework 😒
How is it after 2 years
🤙
Turbo coming?
The duralift pumps are great for starting the truck because it supply’s fuel as soon as you turn the key but under a heavy load it does not supply enough fuel like the mechanical fuel pump does
I heard you actually supposed to change glow plugs like spark plugs
How much is that bumper
whats that connector called?
👍
For a 6.9l with aftermarket turbo, Is there any reason to get the 9-11PSI vs the 4-7psi pump you are using?
It will advance the timing and it will screw up the injection pump somehow. 7psi max lift pump pressure.
@wildrosegarage4208 the IP has a internal regulator. 9-11 psi will NOT hurt the IP at all buddy. Do your homework kid.
You replaced the high pressure diesel pump? How you resolve the timing?
He replaced the lift pump, not the injection pump.
I'm looking at buying a 7.3 idi non turbo, would you recommend it?
I tested several non-turbo before I bought my 94 7.3 IDI turbo. There is a huge difference in power. Go for the turbo. Both engines will run forever if you take care of them.
If lines are disconnected - what is harm in leaving pump in place - just curios - it was an absolute bitch to remove and replace already and dont want to do it again if not needed - especially if electric pump does not solve the air in the fuel problem and truck shutting off when driving - but running fine when idling.
Get a Powermaster starter. I promise you won't be unhappy.
Is the 7.3 idi a good first diesel I’m 16 and there’s one for sale
Always good.
Are you still using both tanks for this electric fuel pump
I am and I did mine the same way
if you had good batteries it will start easier those sound dead af. it needs speed to start
How would an electronic fuel pump be better? A mechanical pump allows you to run the truck after an emp blast.....just saying.
Sounds like you need a battery.
Get a high torque starter
Don’t you have to install a fuel pressure pump cutoff switch in this case? You may burn the fuel pump if you have to leave the ignition switch ON for some reasons. Otherwise great video though
Why didn’t you install the same fuel pump as 99 or newer diesel which might be easier because it’s in line pump?
@@user-ry4mv4no2e the PSD pumps create too much pressure for the IDI’s. We only need 10psi while the PSD needs roughly 60psi.
It cuts power from the IP and the pump because their wired in together. Do your damn research kid.
Yeaaaaa cummins swap that donkey
lol dt360 or go home
@@pilgrim666butters junk
Not with an idi eff that. that thing is a tank. cummins are cool but so are idis.
obviously you say obviously alot
If a stock fuel pump say in tank had gone straight into a single or say double inline set up no way it could leak back thru 1 much less 2 filers in a row. Not seeing the problem & lots of these engines running around every day so there engines r starting. That said I like hving under hood pump esp if u can dial in the pressure & if tank pump goes out u r not left on side of road. They make check valves so fuel goes in yet can't leak back past a simple ck valve. So this seem bs! problem but. Your prerunner tech I am very very heavy dollars spending into 96' ish broncos builds 5k-10k of them strong.
The stock mechanical fuel pump is on the block, not in the tank. And yes, they can leak back, especially if you develop vacuum in the tank.
You need a new starter brother
I have been thinking this same thing. But just curious, how can you tell I need a new starter?
@@ChristianEwingVD the sound it makes when it turning the engine over you can hear the the initial load it takes
@@ChristianEwingVD do you have the long style starter or short type
And batteries as well.