S124 v8 ofgear installed 95% wiring done “part 3”

➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Website: jmspeedshop.com
➤instagram: / johanmuter
S124 v8 ofgear installed 95% wiring done "part 3"
got almost everyting done on the wiring. Small modification is need for the wiring of the sport setting. This has more to do because the switch needs another really for on and off switching. the switching is tested and all works only the adjustment needs to be done when the car is driven.
The actuators for the leveling suspension are also connected incl the controllers. front and rear are connected to 1 potmeter. The low and high setting needs to be adjusted when the car is on full load and the engine is running
Ofgear is fully connected incl. paddle shifters installed. Speed signal is tested also boost and lockout P and R above 10km. Also Reverse light switch is connected. The shifting inputs need to be calculated and a list needs to be made to put in.
i have some wiring left that is not needed that is connected to the ecu. there is a possibility to pin the wiring out of the connecter.
for the next video. I want to get all the inputs and outputs tested on the ecu and everyting else around it. so this will be interesting to see if i have connected everyting correct
if there are any questions just ask
JMSpeedshop.com

[@lozl]

Excellent progress, can't wait to hear it fire up

[@dect1323]

high quality build👌🏻 it looks really good 😎

[@JMSpeedshop]

Thanks 👍

[@zoxischillin8462]

Great progress! I wanna turbo my m102 190E eventually, but I’m wondering if it’ll be better to get a m271 Kompressor motor and do a swap instead of doing the 8 valve CIS m102 since it’s already a boosted motor and has 16v etc. I feel it’d be easier, plus I have an extra 6 speed for the w203 sitting around I hope will bolt up to a m271. If you got any thoughts, I’m all ears, take it easy

[@JMSpeedshop]

The m102 8v and m111 16v share bottom ends. This is very solid platform the m271 i personally dont really know

[@djelewis]

What are you using to link the gear shifter mechanically to the transmission?

[@JMSpeedshop]

Oem shifting rod. But shortened

[@avtodiagnost057]

Бомбочка

[@JMSpeedshop]

? English please

[@avtodiagnost057]

Perfect 👍

[@zayedalhajeri2136]

Great touch brother , Thanks for sharing,,
BTW; is there Email or whatsapp??,
i have question regarding "ME2.0" & "EGS51", Thanks

[@JMSpeedshop]

Thanks . But i can not help you with oem ecu's.

[@908gunib]

M113 turbo no good
Kompressor best

[@JMSpeedshop]

🤣😁