An ADVANCED look at The CUBASE Channel Signal Flow
Вставка
- Опубліковано 18 тра 2024
- ➡️ FREE WORKSHOP "How to Build the PERFECT MIX TEMPLATE"
mixdown.online/free
➡️ Get FULL CONTROL over CUBASE with
THE ULTIMATE GUIDE TO CUBASE
theultimateguidetocubase.com
➡️ Craft Professional, Radio-Ready Mixes
Using Only the Tools Available to You in CUBASE
with The Ultimate CUBASE MIXING Masterclass mixdown.online/mix
An ADVANCED look at The CUBASE Channel Signal Flow
The last video on Cubase signal flow led to a number of questions about pre and post fader inserts and sends… So today we go deeper than you might have wanted into more Cubase signal flow!
Strap in and get ready for this one!
If you have more questions after watching this one, leave me a comment below!
RELATED VIDEOS :
Understanding the CUBASE Channel SIGNAL FLOW - Basic Overvue : • Understanding the CUBA...
Pre Fader vs Post Fader Inserts when MASTERING : • Pre Fader vs Post Fade...
4 WAYS to Apply Parallel Compression in CUBASE : • 4 WAYS to Apply Parall...
How I use the CONTROL ROOM in CUBASE PRO : • How I use the CONTROL ...
Timestamps :
0:00 Intro
3:30 Pre/Post Fader position line
6:30 Pre vs Post Fader channel strip
8:30 Pre vs Post Fader sends
10:30 Post fader inserts into pre fader send
12:30 Rules of thumb/Summary
FOLLOW ME:
Instagram: / mixdownonline
Facebook: / mixdownonline
TIK TOK / mixdownonline
Website: mixdown.online
Compare CUBASE Versions: new.steinberg.net/cubase/comp...
►►The BEST Cloud BACKUP Service (Backblaze) secure.backblaze.com/r/027gx5
►►Distrokid: Get Your Music On Apple Music, Spotify, Tidal (Get 7% OFF on your first year) →distrokid.com/vip/mixdown
Some of the gear and plugins I use in the studio:
►►WAVES PLUGINS DEALS with the following link: waves.alzt.net/c/2353421/2868...
CUBASE 12 sweetwater.sjv.io/XxQVe5
STEINBERG LICENCE KEY sweetwater.sjv.io/6bBJNN
DAW CONTROLLER Presonus Faderport 16: sweetwater.sjv.io/5bXnGn
STREAM DECK amzn.to/3OFVHaO
MONOGRAM CC monogramcc.com/shop/
SPEAKER CONTROLLER sweetwater.sjv.io/gbvG75
MICROPHONE sweetwater.sjv.io/b3WVKB
POP FILTER geni.us/8AnqW7A
STUDIO MONITORS:
KALI Audio IN-8 sweetwater.sjv.io/XxQVBM
HEADPHONES:
Verum1 V2 www.verum-audio.com/
Austrian Audio Hi-X65 sweetwater.sjv.io/vno7MN
Beyer Dynamics DT770 sweetwater.sjv.io/LPzQ6O
STUDIO MONITOR CONTROLLER sweetwater.sjv.io/gbvG75
VIDEO FILMING GEAR
Video gear shared in this video
CAMERA geni.us/My8h
CAMERA PRIME LENS geni.us/Pu7i
CAMERA MIC geni.us/zBCdmg
LAVALIER MIC geni.us/DdQTq
CAMERA LIGHT geni.us/2fruo
VIDEO LED LIGHTS geni.us/259YYN
LIGHT STANDS geni.us/ARrDmz3
SOFT BOXED geni.us/L2XAmoq
RGB FLOOR LIGHTS geni.us/KwL7
Thanks for the informative video, i needed a refresher!
Mr. Cubase Guru!
Thank you so much sir... God bless you
Chris, you are my Cubase hero! Keep making these tutorials! Thanks to you I'm really getting full control of my workflow in Cubase now!
Hi, Chris.
Just wanted to say that you've gotten much better at this.
While I've always enjoyed your videos for the content you provide, I have to say it wasn't always the most entertaining experience.
You've improved your timing and stuff, which makes the videos much easier to watch!
Thanks for doing such a great job!
As a side note I wish there was a way to mix your FX sends with a mixing strip. I know you can use vca etc but it would be nice if for instance you have a delay FX track, you can pull up a mixer of everything that runs into that track to do it quickly.
Thanks Chris for sharing. Useful indeed. Cheers!
Thanks Chris, A very thorough explanation, excellent! Cheers Dave
I usually put my meters in the post position
Thanks boss . If I have more plugins going into the insert I usually move the green line downwards
Again a Great tutorial from a brilliant Man, Thanks Chris
My pleasure! Thanks!
Very interesting, I always learn something. Continuing this serie, could you explain the pre-post fader results on the input tracks ? For example if we want to use a limiter to record. Thanks a lot.
Excellent
Thanks
Great info Chris! I just notice this in cubase and it's driving me crazy. When have a plugin comp eq etc... on lets say my kick drum insert channel uad la2a for example I notice the meter is delayed from the kick hits the same thing on fabfilter pro q eq 3 and the others. If I activate Constrain Delay the meters plugin work perfect but it also disengages other plugins like on my master channel inserts for example fabfilter pro L2. So when it comes to mixing I'm totally lost now since I discovered this. Any help would be greatly appreciated. Thanks. Cubase pro 12 mac m1 uad x6
Hey Chris.. Thanks a lot for replying my previous query in the previous video & making this video a such an intuitive one for gheeks like us !
Everything is crystal clear & its wonderful to know that what i knew previously is correct - by a master like you 🤓..
The easiest way for a novice to u understand this is to imagine that the post fader line will be located far off to the extreme right side of the edit channel window even after the fader.🤓🤓 hope that will push the post fader out of the way of everything.... Thanks a bunch Chris!!🤓👍🥇
Thanks a lot man! Greetings from Germany 🇩🇪
You're welcome!
I can think in a not so rare situation where a post fader insert could be useful: if you have volume automation you could have an overdrive (or any saturation) that saturates less when volume is lower, emulating what happens when a guitar player controls the drive with the dynamic of the playing, for example.
is there a trick you use when you want to level match your mastering chain? I find it#'s hard to compare to other mixes that go straight to the stereo out when I switch on / off all processing on the master bus. I would have to insert a gain compensation plugin that kicks in when all master FX are off to have no big level jump. When comparing with reference mixes I usually turn them up to match volume (not loudness) but there is a limit to that as well (i don't want to add limiters there to avoid changing their sound)
hi Chris, is there a way to make the channel strip pre insert by default on all the channels when loading a new session?
Good description of what we probably all know but can't explain and therefore don't understand properly. 👍
Thanks
Chris, is the post fader Insert after the Send Effects, or before?
what used to get me was when i upgraded my adda to prism and hearing the micro details, how a plugin can affect the mix if switched off but left in the chain, sometimes they add sometimes better to remove, its all turning things on off on off and swapping the order of plugins too, understanding how they all play together, esp when lazy mixing like i do top down, i have a sonnox inflator post master and drive the whole vibe into it, brave mixing and takes years to suss as its all a tug of war, a whole mix can collapse removing one mid side eq from a bus lol
love to see the external effects one with an outboard guitar compressor or something chris maybe a delay on a vocal track
witch shortcut do you use to get the effects strait on the event, thank You for the answer, and keep doing this great job,
F7 Thanks!
Hi! Does anyone knows what is going on with those miliseconds over the channel faders? Its a delay trick before the signal goes into the channel? Thanks!
I am desperat. Can´t record internally (like on FIREFACE 800) on the AXR4U i Cubase. How to set it up ?
Salut Chris! Super vidéo profond! Je crois qu'à 7m09, en haut à gauche, ça devait plutôt être écrit "Post-INSERT C-Strip" et à 7m44 "Pre-INSERT C-Strip"... right? Si c'est le cas, alors je crois que j'ai tout compris! Mais sinon, alors je suis encore tout mêlé, hehe!! P.S. je trouve tes vidéos très bien faits et très utiles. Et très bonne énergie de l'enseignant!
Oui c'est ça, désolé, j'ai juste oublié de remplacer le FADER par INSERT... T'es officiellement PAS mêlé 😂
@@mixdownonline Woohoo! Merci Chris!
Faites nous quelques vidéos en français SVP
How many Aux Track can we Create in Cubase?
Cubase Pro has 256 Group Channels and 64 FX Returns
Signal flow in Cubase is from that time where Dinosaurus were alive! Bitwig followed by Reaper rules by a mile
Little correction : 2 miles
user questions and this video proves that workflow cubase sucks. even users aware of pre/post techniques need to learn signall flow in cubase.
Wrong. Has nothing to do with cubases design etc as its based on a typical analogue console flow which has been around for decades. It's because nowadays the majority of people dabbling in audio production haven't had any experience on an actual real analogue console (which many DAWS mimic) so therefore they are uneducated when it comes to correct signal flow.
@@madmuso5 So these consoles are not well constructed. Sorry, but UX design sucks in short :)
Hello Mr Selim , please check your Instagram ' s direct . i sent you a message. thank you so much.
Thanks Chris, A very thorough explanation, excellent! Cheers Dave
Very welcome, Dave!