Land Rover 4.6L Bosch Full Engine Rebuild (Discovery 2)
Вставка
- Опубліковано 24 сер 2024
- In this video we rebuild a Land Rover Discovery 2 engine, specifically the 4.6L Bosch. We had to pull the engine due to a oil pump failure that destroyed all the bearings. We show all the steps in this video from the bottom end with pistons and bearings as well as top end with the heads and everything else. We also throw some custom bumpers on. Enjoy the video, if you have any questions or comments feel free to reach out! Vive Mas! More content is available on instagram via @xplormor_offroad and @errrry_outdoor
Fantastic work mate, and video is really well put together. I enjoyed. I sorta of have the same rebuild to do on 2 of my 3 Discos. It's gonna be fun.
Thanks brother! Good luck on your rebuilds, fingers crossed it goes smoothly
Another banger, did not realize you guys did land rovers also thought only toyota stuff. 10/10 great video!
We do a little bit of everything! Thanks for watching brother
I need to contact you! concerning information about Rover alum V8 engines and a possible rebuild from you guys. and I need some expertise advice too! Where are you located?@@EverydayOutdoor
@@kennyh5083 We are in NC what issues are you having? Ill try my best to help
That dang engine, I have heard many things about those 4.6's and not many of them have been good haha. Good video guys!
They are known for some reliability issues thats for sure. Thanks for watching
I need to contact you! concerning information about Rover alum V8 engines and a possible rebuild from you guys. and I need some expertise advice too! Where are you located?@@EverydayOutdoor
Thank you very much for your video, very clean work!
Thank you brother!
Awesome video Jon, impressive stuff you guys!
Thanks so much man! I really appreciate it
Big hello from Northern Ireland dude….. I have this very engine in my V8 rover 👌🏼 nice work
Hey big hello right back at ya from the South Eastern US. Thank you for the kind words and watching!
Fire video as always homies!
Thanks fam!
This is super sick bro, love this video!
Thanks brother! I appreciate you watching
Great 👍 video bro.
Great job!
Wish would sprained all details
So I can fix mine.
Thx
I just noticed there's an E38 in the background. So cool.. 740 or 750?
You make it look soo easy. And Clean, lol.
03 v8s had a flaw with dowl pins .oil pump will fail again .check it out
Great video!!! I just pulled the engine out of my wife’s 2001 the bell housing bolts sucked and I had the heads off, how did you get them torqued with the engine fully built?!?!?!?
Can this engine work eith Defender 110 300 tdi
Is the audio just rough or is the engine sounding rough?
It sounded a little rough in the beginning. We ended up pulling it back out and going through it again
@@EverydayOutdoor great Video guys, I'm doing the same to my 04 4.6 same problems bearings burned up # 4 cam bearing walked into the lifter oil pump gear was broken. Im curious what made you pull the motor again? what did you find wrong? Thanks
>
All that work to put the wrong coolant in?
Mine has the same problem yours had can you come and do what you did to mine in Grand Junction, CO.
NIce! Did you pin the liners?
We did eventually haha
are engine cylinder sleeves replaced?
Had to re-upload due to some technical issues
any stroker kits available for the rover 4.6 litre v8 in the states?
Great job guys. I have a 2000 discovery 2 looking to rebuilt the engine. I need guidance with this project. Was wondering do you have a contact number where you can reached ?
Where are you guys located? I have a 2004 Disco 2 and need the same thing done. Can you help a brotha out?
Rtv sealant on the oil pans gaskets and valley pan 😬
Gotta make sure shes sealed up. These things love to leak
Newer Valley pan and later oil pan gaskets are specifically designed not to take rtv sealant.
Uhh you got the unedited version. I need a reference and moral support lol
its like 4 hours long but yeah I gotchu haha
@@EverydayOutdoor Would love it as well. Maybe I'll give it a shot with my 2004.
How much you spend on parts ?
Would you like to rebuild mine for me please lol it’s knocking like somebody is trying to bust out of the engine!
Haha thats a common problem with these! Where you located?
@@EverydayOutdoor Somerset Ky but I’ll drive it out to you! Just got the M S transmission fixed by replacing the XYZ switch. Also went ahead and replaced the cam shaft sensor as well.
It is likely a cylinder sleeve starting to slip up and down. You need a reman block. They pull the cylinder liners, and machine a groove around the top of the cylinder, then replace liners with a shoulder to keep the liners from dropping. It was a flaw in the original engine design.
Nice job other than this engine takes Dex-cool antifreeze.
Can you update on motor in the future would love to see how it is holding up after a few thousand miles
Yeah we showed the engine after 10K miles in the video actually around 7:40
How much did the rebuild cost with machine work?
Without double checking I believe it was around 650$ for the rebuild kit and the machine work and then an additional 350$ or so to get the other crank ready to go. So about 1K total plus all the little stuff like oil and beer haha.
@@EverydayOutdoor where did you guys get the rebuild kit from?
@@Well.BoughtPhotos Thats a good question , let me see if i can find a link to it.
@@EverydayOutdoor Did you ever find the link?