Ultimate Center Console 6 Month Build Review
Вставка
- Опубліковано 4 жов 2024
- The full run down on my Black Marlin built 5.8m center console. After 6 months and over 2000km travelled in this boat I explain all the pro's /con's and everything I would change if I had my time again.
Ill give you a tip when using the extension draw bar. Place something under your jockey wheel before unhitching. If that jockey wheel sinks into the sand, you wont be able to hitch it back up on either hitch point.. love the setup.
See you on the tracks or the water..
Handy tip! I did pick this up after I unhooked unfortunately! Haha
Nice Brother
Honest, Boat looks great thanks for your time.
Great sales Man as well as a Fisherman.
Stay safe enjoy Life Cheers
Nice rig , beautiful machine
Replace the trailer bow roller with a big Vee on the winch post. Best thing i ever did. Catches everytime.
Awesome boat, i noticed you've got some sort of support under your Minn Kota, i got a Ram bracket specially made for that under my Motorguide long shaft. It swivels and adjusts to any height bolted on top of the gunnell, it locks the shaft in. I got mine from Brisbane Marine.
Thanks mate, yes it’s just a piece of aluminium cut to suit at that moment while I wait for my “Elecy leg” support to turn up. But I have seen the ram mounts you have also bloody great idea 👍🏽
Great boat definitely good choice getting rid of the prop get a hydrofoil for outboard make a huge difference lifting the nose up to stop spray
Beautiful boat mate, my future weapon 🙏🏻🙏🏻 done hook up your spot mate. Yeeeeew
Love the set up mate!!! Me and my partner are doing full aus lap with our 6.6m razerline. building airbagged trailer atm , great inspiration
change the drawbar extension bolt to a cuphead and drill through for a split pin above the bottom webs because if the nut comes free on the top the bolt will fall out and that wouldn't be pretty if you're travelling. this is why they put it the way the have. try something like that or similar.
Supper nice boat! I'm very much considering building one of the CNC Marine cabin designs. The maximum trailer width that you can tow in America is 8 ft. 6 inches without a wide load sign. I saw another video about this boat design where they put the fuel separator hidden inside a locker. I would definitely install some trim tabs. Can you install some trim tabs easily now that it's all welded up? In North America, Mickey Mouse imply s that the quality is sub par. This is the first time that I've heard someone use this terminology in a positive way.
Mint set up 👍.....I have quite a heavy 6m ally boat myself running the exact motor, you definitely should be spinning 6200rpm and pulling mid to high 70's....5800 RPM is too low. I am running a 16 x 20 - 3 blade factory suzuki prop....A mate who runs a twin rig with identical motors runs a 16 x 21 - 3 blade and runs 6000rm...Hope it helps !
That’s bloody awesome mate thank you! I’ll look into that. Much appreciated 👍🏽
Nice boat mate, I reckon if whacked the Hayman XBar toe around on your Ute it would take away the majority of trailers draggin on the ground unless ya in really big gully’s ect I reckon ya frame would have barley touched the ground on Fraser with one of them on mabey 🤷♂️
Thanks mate, I have been looking into one of these and also an adjustable tow ball just to pick up the front of the boat a little more.
this will sell big time for Black Marlin
21:58 they make an edge guard seal that you can fit over that 1/8 aluminum lip that will help seal the hatch and should also make it slide around less and be quiet. I can send you a link if you want?
Thanks mate, I think I know the stuff your talking about! I will jump onto this and see how it goes, that’s for the tip!
Hi mate I like your beach launch bar setup have you ever thought about using a treg hitch T Bar they are spring loaded it might work better than both Ur nuts and bolts
Only issue is they will probably rust after awhile from ocean
Sharrow prop for sure. 20% fuel reduction
Is there nothing above the fridge? I envision the cushion flipping up to have another storage bin that goes down to the top of the fridge.
Duro lock❤
If your using 1.7L per km, thats absolutely terrible. I think you have the figures mixed up...😮
Nice boat. What brand of switch panel are you using and do you recommend it? Cheers
I had a pull out pin with spring in my spare tire. To suit Dundee boat ramp few years ago. Just use the winch wire lunching and retrieving. way too easy
Hey mate I'm running the HDS12 too and was wondering what 1kw transducer model are you going to add?
Cheers 🍻
Micki frickin’ mouse mate! 🤘👊
Mickey mouse means half assed or cheap in U.S.A.
also mate In am going to get myself one, the same as yours, I am contacting Black Marlin, I'll be towing this with my Commander (see The Ultimate luxury Off Road Motorhome )
How much your bot mate, if you dont mind.
Aluminum lasts forever. cool center console
Plenty of Mickey mouse’s getting thrown about
What size boat?
Hi mate, it’s a 5.8m black marlin centre console.
Hi
What transducer did you install?
I would like to have same transducer covers made for my similiar ducer.
Can you provide contact details of the person would made these Ducer covers?
Thank you
Cameron
Hi Cameron, black marlin fabrication in Brisbane built the boat and also custom made the covers to suit.
@@roughedgesadventures thank you
Cup head bolt