Such a sweet boat!! I just love the styling of your aluminum fishing boats in Australia. I wish you had them in the U.S. they are better looking than most of the pilot house style boats made here. Both are wonderful boats but I must admit that the Aussies really put some nice body lines on their Aluminum boats. This was a great video and it was a bit bittersweet story about the name, that name really means something. Thanks for the great video and the boat is so badass!!
One fuckin sic as vessel for out wide, Bloody love it. I've been looking at Blackwatch 26 which has always been my dream boat with a Yanmar 315HP and shaft drive closed in cab with A/C . This vessel is now compromising my dream Offshore rig.
Surprised tractors aren't more common over there for beach launching? Every small beachside community here in NZ is full of the bloody things lol. Although theres a particularly gnarly bit of coastline a few hrs south of me where the tractors make way for old bulldozers instead!
I'm slightly more than jealous 👌 Is there a reason one would go for a mono in that size as opposed to a cat (Sailfish springs to mind). Not towing on roads, tractor to launch and retrieve. Would like to hear experience and reasoning. I like to know other people's thoughts because we can all learn from someone.
may i comment I built boats sinc 1972, my own Co. since 86, building all in alu, from ocean sailboats, to commercial mussel harvesters t0 3o m and trailer boats to 9m In NZ where we use outdives for offshore I just drew ab 8m using tunnel for single 300 shp Cummins, 60 l hour and torque such that you leave throttles alone So here you are paying 400 t0 500 dollars hour for gas this makes no sense The profile of your boat looks good mistake, those long strakes, all they do is compound hard ride entry fwds looks good , that is deadrise 6mm IMO is overkill on the topsides plat, I'd use 5, but on the bottom, this is my choice please take this as a professional take on it.
What a boat. This guy must be loaded. Massive boat, tractor, nice beach house, little jealous, good luck to him
man this is the best one in ages - top notch, what an awesome bloke.
That’s actual living barry. Great work lads. That’s why we call this great country home 🇦🇺
what a weapon of a boat. old mate seams so chill as well.
Such a sweet boat!! I just love the styling of your aluminum fishing boats in Australia. I wish you had them in the U.S. they are better looking than most of the pilot house style boats made here. Both are wonderful boats but I must admit that the Aussies really put some nice body lines on their Aluminum boats. This was a great video and it was a bit bittersweet story about the name, that name really means something. Thanks for the great video and the boat is so badass!!
to have a place like that on Fraser plus this rig - dude has spent millions!!!!
What an awesome set up Wade! Hard working bloke and always a pleasure to deal with. Well deserved mate 🤙Hope to see you on the island
Hard work pays off!
Beautiful property, epic boat and seems like a legend. Yew!!
One of the chilliest video I’ve watched. Nice boat!!! Wow marking fishing going 40knots.
That's a lot of love, time n thinking put together to build 🚢 a awesome great job
What a cracking looking boat reminds me of the Irish Hellraiser from O’Sullivan marine in Ireland but this is bigger and more solid lovely boat mate
One fuckin sic as vessel for out wide, Bloody love it. I've been looking at Blackwatch 26 which has always been my dream boat with a Yanmar 315HP and shaft drive closed in cab with A/C .
This vessel is now compromising my dream Offshore rig.
Dream rig,great build mate.👍
Absolutely Awesome, Good Luck and Stay Safe. ✊
What a rig, yew 🤙🏼 awesome Vid as always too
You know it’s a serious boat when you need a tracker to move it 😂 👌 👌 👌
Awesome video guys. Love the style and quality. Dream setup right there. Great work everyone involved 👍
Hurray for more platey love! Epic vid 🤙
Outstanding craftsmanship I wish I could buy that exact boat in the United States
Cracking boat mate!!
Surprised tractors aren't more common over there for beach launching? Every small beachside community here in NZ is full of the bloody things lol. Although theres a particularly gnarly bit of coastline a few hrs south of me where the tractors make way for old bulldozers instead!
THIS THING IS PURE FILTH! Love it!
You should get Wayne daw on the captain with his 10 meter cat with twin v8 land cruiser inboards on it
Any links
Great success story, good on him.
Hats off to you bloke 👌
Sweet boat!
Great video
What a build
I wish have a perfect boat like this🥰
Props to this bloke, spending the money doing what he loves, Fraser is a tad different from Gatton 😂
Absolute rig
Nice One!👍
I gave him a 6 pack of beer to tow me out of the soft sand with the tractor at orchid beach, top bloke
What a beasty thing!
Lovely
Sensacional, vou trabalhar muito pra realizar meu sonho, um desse será meu eu creio 🙏🔥❤️👍✌️
I'm slightly more than jealous 👌
Is there a reason one would go for a mono in that size as opposed to a cat (Sailfish springs to mind). Not towing on roads, tractor to launch and retrieve. Would like to hear experience and reasoning. I like to know other people's thoughts because we can all learn from someone.
I think he means 1.4 litres per km...
Nice machine indeed.
love ally boats
Love it all! 👌But can you please tell boaties these days to talk in nautical miles so they sound the part as well 🤣
Amazing. 1.4km to litre seems way to good to be true im getting 1 to 1 on my 7.8 riptide with twin 150
yeah that's what I thought but maybe he meant it the other way 1.4L per km? coz later he mentioned 7-800km per 1200L tank?
What’s the big black square thing you put in the bottom of the boat
Transducers
Is this dude looking to adopt? I'm 36 but I'm sure we can make it work
I want to know what happened to the poor fronius?
Always looking for the kids on a boat, just sit still
What foam did he use on the floor
25mm closed cell eva foam sheets 👍
@@nudgeee80 thx mate
@@nudgeee80how can I get one of these built
Was there any change out of 750k ?
I think price would be around the 600 mark that’s a big investment
@@Adl-pk4hg those alu boat should last 100s of years , just keep adding fuel and replace engines and electronics at some stage
Wow f me what a weapon
may i comment
I built boats sinc 1972, my own Co. since 86, building all in alu, from ocean sailboats, to commercial mussel harvesters t0 3o m and trailer boats to 9m
In NZ where we use outdives for offshore
I just drew ab 8m using tunnel for single 300 shp Cummins, 60 l hour and torque such that you leave throttles alone
So here you are paying 400 t0 500 dollars hour for gas
this makes no sense
The profile of your boat looks good
mistake, those long strakes, all they do is compound hard ride
entry fwds looks good , that is deadrise
6mm IMO is overkill on the topsides plat, I'd use 5, but on the bottom, this is my choice
please take this as a professional take on it.