Using the Smithers script on the Mr Burns RetroPie image

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 62

  • @jenguyenebay
    @jenguyenebay 4 роки тому +3

    It took me so much trial and error and time to configure Mr Burns' image last year. Recently my micro sd card became corrupted and when researching on how to rotate the screen i ran across the Smithers script. It was alot easier than I had expected. Now i'm loving my vertical cab so much especially with the classics like Ms. Pac and Donkey Kong and all of my fav Shoot 'em ups like Raiden II. Thanks!!

  • @jenguyenebay
    @jenguyenebay 3 роки тому +2

    So I was moving some rom files around a managed to corrupt my Mr Burns image again. So had to reformat and re-image. Your video again was invaluable to install the smithers script! thanks again!

  • @MegaOldschoold
    @MegaOldschoold 4 роки тому +3

    Thank you for this! Just updated my Burns image and like this way better. I can hide the ones I will never play. Thanks again!

  • @VoidSickness
    @VoidSickness 3 роки тому +1

    This video helped me out. I was having issues with the original image and button config. Formatted, reconfiged (had to add another button as A) and now my mrs Pacman countercade is LIT :) many thanks !

  • @NoSpin23
    @NoSpin23 4 роки тому +1

    Thanks for this vid, this is exactly what I wanted! For me Attract Mode is now sideways but I'm one of the weirdos that prefers not to use Attract Mode, just ES. Thanks again!

  • @lit_wick
    @lit_wick 3 роки тому +1

    My way of using the burns image is to load up the arcade text document and simply add (*) to the start of any game I don't want to see in attract mode. I mapped the player 1 and player 2 buttons to move up and down a letter in the game list. I like the attract mode look, just needed to thin out the game list

  • @DrCap24
    @DrCap24 3 роки тому

    Please help every time I power my countercade I get a black screen and sound effects. I have to ctrl alt del the raspberry Pi or cycle the power to get the image to load properly every time. Any help would be greatly appreciated.

  • @Brimzee84
    @Brimzee84 3 роки тому

    Do you know what’s different in 1.6? Been looking for info everywhere, but can’t seem to find anything.

  • @Ruzkig
    @Ruzkig Рік тому

    Will this script work for Mr Burns 900 in 1 Vertical as well?

  • @allenyarberry7502
    @allenyarberry7502 4 роки тому +1

    WOW - so much more easier than the other "How To" videos on making this work right. Thank you so much for sharing a simple way to make it work.I'm brand new to retro gaming and learning a lot. I'm using this image on my first bar top arcade and it will be great if there was a a way to power the pi down in software without having to type. I have a pi 3B+. Any ideas would be greatly appreciated. EXCELLENT VIDEO!!!! I learned a lot!

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      You can use the Start menu and Shutdown to turn it off. Another option is to connect a button to the GPIO pins and install a script. I am considering adding GPIO to my next version of the Smither script.

    • @allenyarberry7502
      @allenyarberry7502 4 роки тому +1

      @@texashomearcadeservices4714 Good tip - thanks for sharing. I'm still learning, but it has been a fun ride.

  • @DoubleDguitar
    @DoubleDguitar 4 роки тому +1

    I am going to do this update tonight. I found you on fb, thanks so much for this and your work. I seem to remember the original image was oriented properly for my screen, as I am not using an A1UP screen. Would you recommend exiting ES and editing the script if this update for orientation? Or does ES offer an orientation option? And is the ratio going to stay the same after the update? I am really looking forward to fixing this image, I built a second bar-top just for a vertical image right around the time of the original release of Mr B. Thanks again!!

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому +1

      The /boot/config.txt sets the rotation for Emulation Station with display_rotate. You can try changing this value if it is upside down for you, and switch to display_rotate=1 instead of 3.

    • @DoubleDguitar
      @DoubleDguitar 4 роки тому

      Texas Home Arcade Services that is what I figured would be best. Thank you! I didn’t get a chance to update yet, but will. You are at 1.4 correct?

  • @johncunius8054
    @johncunius8054 4 роки тому +1

    I have sound in the menus but no sound when I select a game?

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      My script does not impact the sound settings. However I usually connect my speakers to the HDMI board and all seems to work with defaults. I have experienced issues when switching the audio settings back and forth, so if you get stuck, it might be worth reflashing your card and starting over.

  • @egrocket94
    @egrocket94 4 роки тому

    I’m using the Mr Burns on this cab as well. Don’t I need to add a few buttons to be able to play? Coin button and another?

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      Yes you need coin and start. I added these and a 2P start as well to my front J panel so that I didn't have to drill into the plexiglass.

  • @John_Matrikz
    @John_Matrikz 3 роки тому

    Excellent tutorial. I would like to know how to correct the sound of the games toaplan and arcade namco classic collection in this image by mr. Burns?

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  3 роки тому +1

      I would suggest using the keyboard and hitting tab, and then either adjust the volume db in the menu or map keys to volume up and down and adjust. I am not certain if it saves the volume level on exit, but if it does then you should be good.

    • @John_Matrikz
      @John_Matrikz 3 роки тому

      @@texashomearcadeservices4714 Many thanks for the reply. But I was wondering if these games: dogyuun, tatsujin, namco classic collection have sound in mr burns ?? Thanks

  • @princevinny0073
    @princevinny0073 3 роки тому

    hey i got a question for you about your atomic pi
    can i use Image from arcadepunks for a atomic pi will it work ???
    even tho the image is made for a rasbari pi ?

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  3 роки тому

      Not sure how this comment goes with this video but the answer is no, the Atomic Pi cannot use a RetroPie image from arcadepunks unless it is a Batocera image for x86. I don't recall seeing Atomic Pi specific image there, I just used a base Batocera image from batocera.org/ and added my own roms.

    • @princevinny0073
      @princevinny0073 3 роки тому

      @@texashomearcadeservices4714 😥 😕
      oh thnx for info that sucks then that means atomic pi dont have any nice layout like raspberry pi am looking for a bueatfull layout like this for my arcade 1up cab ua-cam.com/video/UT79NLzYMjM/v-deo.html
      batocara is kinda a boring layout looks dull compaired to this

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  3 роки тому

      @@princevinny0073 that is just a theme, which I also use on my Atomic Pi with Batocera. RetroPie themes are compatible. You can even just copy them over the the proper directory.

    • @princevinny0073
      @princevinny0073 3 роки тому

      @@texashomearcadeservices4714 🤩🤩😍😍 what you can do that NO WAY thats so sick OMG you should make a vid on how to this it
      i didnt know u can do that hahaha
      so i dont need to buy a Rasbary pi to make it look like this ?

    • @princevinny0073
      @princevinny0073 3 роки тому

      @@texashomearcadeservices4714 what is the name of that them do u know ??
      i wanna do some reserch on how to make
      my atomic pi look like that
      if i could do this with a atomic pi
      this would save me money am so fustrated am thinking to buy a $140 rasbary pi
      just to have that theam so my arcade 1up can look like a multicade when gust come over but if i could repicate the look of that with a atomic pi will save me bunchs :D

  • @spennyv32
    @spennyv32 4 роки тому

    Thank you for this. I have a countercade I did this too. It worked. Now though, some of the texted on top and the bottom of the screen is a sliver chopped off. High score is about half missing. Is there anything I can do to adjust it just I little bit?

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      I do not own a countercade yet to test with. Try hitting select (coin usually) + X to bring up retroarch settings, then try different options under video until you find one that works better.

    • @spennyv32
      @spennyv32 4 роки тому

      @@texashomearcadeservices4714 I'll try that here soon and see how it goes.

    • @spennyv32
      @spennyv32 4 роки тому

      @@texashomearcadeservices4714 I got most of the modded countercade done. The imagine now fits the screen. I was just tinkering with the "auto" button on the controller board that's connected by a ribbon to the LCD converter board. I was so happy. I can live without attract mode

  • @ForSunday
    @ForSunday 4 роки тому

    I always get black unused space and my games don't fill the screen side to side, do you know what setting I need? I've been trying all the resolutions in the config but no luck.

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      If you are using a fresh copy of the Mr Burns image and the Smithers script you should not have such issues. It sounds like you have an option in the RetroArch config different than I am using. I would suggest to start over on a new SD card or reflash your current one to get back to a known state.

    • @BartManDude
      @BartManDude 4 роки тому

      I am using a 4:3 screen and had black bars on the side of games. I had to go into the retroarch settings to change the X coordinate and also the aspect ratio and resolution. The mr burns image is preconfigured for a vertical 16:9 aspect ratio so it needs adjusting in retroarch to make it fill the screen on a 4:3 or even a 16:10 monitor.
      Here is a video of someone doing the opposite as he is restricting a full screen view on a 4:3 monitor but you can just change yours to match the settings he starts with. ua-cam.com/video/FlVmV3rtKmc/v-deo.html

  • @77ShadeTree77
    @77ShadeTree77 4 роки тому

    I am using the Mr. Burns image but I have already figured out how to rotate the screen. I mainly use attract mode. If I add the Smithers script, will that give me the favorites option? And do you know if that favorites option would be visible in attract mode as well? That is what I'm most interested in. Thank you for the video!

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      No, this script does not enable favorites in attract mode. It does not support attract mode at all. Attract mode was set up in such a way that splash screens are fixed to a different orientation, and this script will move around the media files as well.

  • @markrea2
    @markrea2 4 роки тому

    Hello. I’m a complete novice with molding and need some help. I have a similar machine (Pacman); unbuilt. Want a similar mod without any drilling or adding buttons.
    Was planning on using a 4 or 8 GB Raspberry Pi 4. Is that good?
    Also, is the “image” the same term of the “ROMs?”
    I’m also unclear of where to download this image?
    Thanks! Liked and Subscribed!

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      You will likely need to add some buttons because PacMan doesn't have that many to start with. A Raspberry Pi 4 is better than what I am using in this video, but the Mr Burns image is a Pi 3 image and I don't think it will boot on a Pi 4. You will need a different image for that one. Search for Arcade Punks and you should be able to find the images.

  • @Markew001
    @Markew001 4 роки тому

    Wondering if you've got any advice for me. Followed your video, starting when a fresh image and everything worked perfectly. However there are still seemingly a lot of roms that run sideways and I can't seem to rectify this. They all seem to be using the AdvancedMame 3.8 but I can't locate any particular settings for that. Any help would be much appreciated!

    • @Markew001
      @Markew001 4 роки тому

      Disregard... Figured it out!

    • @TimDavis77
      @TimDavis77 4 роки тому

      @@Markew001 What was your solution? I was looking into doing this on my Galaga Arcade1Up and wanted to make sure I didn't run into the same problem.

    • @Markew001
      @Markew001 4 роки тому

      @@TimDavis77 I discovered a setting in the config for AdvancedMame that was set to "no." It was:
      display_rol yes | no
      Now I'm just stuck configuring my trackball for Mame 2003. Despite my Googlings I can't get anything to make it work!

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      @@Markew001 Nice work on finding this solution! Which game can I use for verifying this? Where does this file with this setting go? I can update the script to add it!

    • @Markew001
      @Markew001 4 роки тому

      @@texashomearcadeservices4714 Hey! The file is "advmame.rc" and it should be located in /opt/retropie/configs/mame-advmame/
      These should be set as such:
      display_rol yes
      display_ror no
      One game off the top of my head that I know uses advancedmame is "Action Fighter."
      Hope that works!

  • @thomasferiend3076
    @thomasferiend3076 4 роки тому

    I was wondering if anyone can help me.. I did a fresh install of raspberry pi and retropie on micro sd card put the mr burns image on it and I also put smithers v1.5 on the sd card but when I try to install smithers using the instructions listed in the descriptions I get -bash: cd: /boot/smithers_v1.5: no such file or directory

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      Then you either didn't extract the zip file yet or perhaps used a different name. If you didn't yet unzip, then cd to /boot then unzip filename.zip -d smithers

    • @thomasferiend3076
      @thomasferiend3076 4 роки тому

      I figured out what I was doing wrong I wasn't inputting cd /boot and hitting the return key

  • @ratmaster2000
    @ratmaster2000 4 роки тому

    I noticed you were in emulation station after the reboot, will attract mode no longer work?

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      That was the point. If you want to use attract mode, this script is not for you. They rely on different rotate screen settings.

  • @joshuaahl9525
    @joshuaahl9525 4 роки тому

    The file doesn’t work

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому

      As in it doesn't download, or doesn't run, or doesn't change anything for you? If you can be more specific I can help.

  • @notsoeviljerry
    @notsoeviljerry 3 роки тому

    This is really cool but I prefer Attract Mode.

  • @simonspringett9909
    @simonspringett9909 2 роки тому

    Works great however terrible screen tearing.

  • @MrRgarcia112
    @MrRgarcia112 4 роки тому

    what does this script do? Thanks

    • @texashomearcadeservices4714
      @texashomearcadeservices4714  4 роки тому +3

      It is for changing the Mr Burns vertical Retropie image from Arcade Punks to work in Emulation Station and support favorites rather than making you scroll through 800 games to find what you want. It also sets the screen orientation properly for an Arcade1Up.

    • @MrRgarcia112
      @MrRgarcia112 4 роки тому +1

      @@texashomearcadeservices4714 Nice! Thank you for the info!