Dyson DC41 | Thorough disassembly and cleaning of root cyclone vortex and cannister bin | how to
Вставка
- Опубліковано 13 жов 2024
- Dyson DC19 Vacuum Cleaner: amzn.to/34SHSzz
Dyson DC19 Turbine Head: amzn.to/2H4QR8p
Dyson DC19 Filters: amzn.to/34TCwEf
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co....
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program and I may receive a commission for the sale. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.
I looked at several videos but yours was the only one that gave me enough step by step detail to be able to take apart the cyclone vortex. I'm a fan. Thank you.
Thank you so so much. I got gifted one of these a year ago and I’ve been using it since. I just started cleaning it for the first time (shame shame) and it is soooo nasty. I was stumped when I got to this part of my disgusting journey. I appreciate the walk thru!
I cleaned mine without removing the screws. Works just fine. Thanks for the video.
I ll have a crack at that but I won t bother taking the red lever out from the spring as it was a pain to get back in .Glad I watched this or i would have given up
Wow, you saved me hours of aggravation and aspirin. Not to mention a trip and money to the vacuum repair shop. Amazing! Hats off to Bootsowen!
Cheers buddy. Don’t forget the superthanks or PayPal tips. Thanks
Thanks! I cleaned my 2013 DC41 animal. It isn't exactly the same but close enough that following your video made it possible. I hope to get another decade of good service out of this machine.
Thank you, cleaned mine without removing the screws, but I did use a small bottle brush in those areas and a hair dryer to blow the dust out. A little easier. Great video.
great video! I did this exact cleaning this weekend, 2 take aways I found. the white plastic piece that has the inner lip that catches a lot of dirt can be removed from the minicyclone array and for taking the gauze off, once the I had the gap established with a screw driver, I used a paperclip and toothpicks to walk that section off.
Who knew the little end of that spring kept the middle red piece lined up with the big red piece? Drove me crazy. And thanks for zooming in!!!🙏
Best disassembly vid I've seen on the topic. Well done lad🍻
Thanks , this was helpful . I appreciate . Hopefully I can put it all back together tomorrow !
Amazing video and a HUGE help!!!! The spring was an issue for me so I had to watch a few times. Your instruction was clear and super helpful! THANK YOU!!!
Glad it helped!
This was a tremendous help!!! thank you for making this video
Whoever decided it was a good idea to stuff those dumb little torx screws down in that ridiculously awkward spot buried up in there has never tried to take something apart. Gotta love engineers.
Thanks for the video, the canister release button on my DC41 broke and I ordered a new one. I was worried I’d have to take the whole thing apart to get the bottom part of the button out but when you missed reinstalling it before you reassembled the top and found you could just stuff it in the side it saved me the aggravation of trying to get those torx screws out and back in again.
Good
FYI that white piece at 12:45 just slides off to make access to the screws a LOT easier.
Love this video! So good! It's inspired me to clean out my DC41 cyclone for the first time in such a detaield manner. Very good and soothing voice and great presentation! Thank you Bootsowen! I'd be interested in your other appliance maintenance videos. I disassembled my front loading Electrolux and removed the drum, cleaned a ton of dirp off the rubber seal. That was amazingly satisfying! Nobody has any idea how dirty those can get! 😉
Good stuff! doing stuff for yourself is great! Satisfying.
Thanks for video m8 help's loads in doing a deep clean with out braking it saved me loads of time .
Great!
Found one of the law today at the thrift store. Paid 18$. Cleaned it all except for where you need the torx screwdriver. Didnt have any. Will get some but this thing runs smoooooth
This video was great! Our vacuum is clean and happy now. Thanks for the detailed instruction!
Great to hear!
Excellent video. Thank you.
The thing about bagged machines the smells go to the motor and you can’t clean out the bag compartment to get the smells off. The first time I took my daughters DC37 apart I thought it was hard.. but I just bought a 10 yr old DC37 for my son and it took no time to do the tear down. I will let it dry for a few days to be sure and that takes the most time if you need it sooner.62 yr old gramma here with free time to do it though.
Hey great video saved me a ton of frustration as well. Now my Dyson is nice and clean. Took one extra sep and let it all dry before reassembling and also lubricated all the O-ring areas with silicone. To keep the gaskets from cracking.
Yes. It is very important to let it dry.
Hey man thanks you saved me a great amount of time great job
Excellant video, my brother. Thank you!
Thank you for this!
No worries!
This video was great. Very detailed! Thanks
You're very welcome!
thanks for the vid! :) exactly what I need
No problem!
Thank you!!
Can you wash the hose tube?
Yes
Nice job
Good video
That white part on the dyson dc 41 is removable gasket because I took mine apart today and washed it and let it dry
Spot on nice video
Hi, great video, really helps build confidence in tackling a job like this. Just one question. The bastard screws around the 9 minute mark - are they just standard Phillips cross slot screws or more exotic? My Phillips screwdriver is struggling to make them turn.
Dyson usually uses torx screws.
@@bootsowen Thanks .... just checked again and that looks right, so I'll get a set of long torx screwdrivers . Thanks again!
It might be possible to get a set of screwdriver bits with an extension, then you are not just buying one thing for one job, but maybe you need to get into a tight space! Have a look at my other dyson cleaning vids, I have done this to a few vacuums.
@@bootsowen The long torx bits (magnetic which will also help) arrive today and I can use with an existing screwdriver. Not too expensive. So I can get going again. Its quite a fiddly job though I'll get it done. Using the Dyson in its current filthy state creates a really unpleasant smell, not improved by washing filters so I really need a deeper clean. Thanks for all the help.
What size torx screwdriver did you end up using?
I agree I was recently given a DC41 I prefer a nice bag vacuum. My current one is a simplicity which I adore. This Dyson while washable just seems needy and it doesn't impress me much.
I'll NEVER buy another bagless vacuum. I cannot figure out why people like them so much.
My DC41 dust canister/bin has started to fall off the vacuum. When engaging the vacuum rollers and snapping it back in, there seems to be some flex in the gray handle. It's like the dust bin is able to just barely be able to start to fall out because of it. It doesn't really look like the plastic is worn, but hard to tell.
Do you think it's the spring inside the part at 2:35 starting to wear? Any ideas how to make sure it doesn't pop off until I actually press the release button?
Thank you
Next..do motor and stick assy...I am stuck on removing the stick from the motor assy
Just click the red thing on the top of the stick?
Just got rid of my DC41 like a few months ago because of this problem☹️ and now I got a shark
I can hear the Jaws movie theme tune!
So sorry for your loss brother.. maybe see if there is a list and found.🤣 Think of adding the animal canister vac and maybe one of the digital motor
Thanks bootsowen. Who the hell would buy another dyson vacuum cleaner? Over designed overpriced. I bought a simple Henry or Hatty with very large throw away or burn them bags. Simple cheap vacuum. by the way my son and I have science degrees and this vortex design is just bells and whistles. Filthy cleaners.
I sure hope you wore a mask..