THANK YOU SIR , this video saved me a great deal of time and money , GOOD DETAIL INFORMATION , It is people like you that make UA-cam A GREAT SOURCE OF INFORMATION TO THE DO IT YOURSELF WORKING PEOPLE THAT DONT MIND GETTING THERE HANDS A LITTLE DIRTY , CHEERS NICK
Thanks for all of your videos. Just bought one of these last year and servicing it myself saves a ton of money. Good quality videos and very straight forward instructions
@@mattross6902 After it was stored for winter I noticed it smokes every time I start it. Changed oil and oil filer as well as air filter. Didn't help. I had it serviced by the local Power Equipment Dealer I bought it from and they are telling me I need to replace the carburetor because I did not drain all fuel for the winter or used the special ethanol free gas they sell (So I broke it...). They also said this would not be covered by warranty and total cost is over $600. This does not seem right as the machine was only stirred for 3 months between uses. Is there anything I can do to clean the carburetor or change it myself
I've had a Liberty Z for about 5 years now. The only trouble I've had is the yellow PTO switch that engages the blades went bad and caused a no start. It was easily and cheaply replaced with one from Amazon. It was still under warranty but it was easier and cheaper (not having to burn gas towing it to the dealer) to do it myself. Scag makes a great zero turn.
Thanks man! I would be lost without an explanation like this. As for the critics: most of them are constructive and just trying to help, but if they aren't they can go...well you get the idea.
ALSO: About 10 hours after I changed hydro fluid and filters, I noticed the fluid in the reservoir appeared to be dark, discolored. I called the company that makes the Hydro pumps, the guy told me to dip my finger in there (there is no dip stick just Hot and Cold level lines) the oil on my finger looked brand new! For some reason the opaque reservoir looks deceiving. He said I was not the first one to call with that concern.
You mention a faster way to fill the hydro pumps but don't elaborate. Is there a faster way to fill the pumps? Also, I think it is a great video. Helped me a lot. Thanks.
Yes it now has 120 hours on it. Only problem I've ever had is my gas gauge broke. Kawasaki motor is flawless. I would only but a scag. Friends gave been through simplicitys and others but scag has been great!
Is the Wix 10102 filter rated for hydro pump pressure? The filter bypass relief valve operation could be questionable? Is the Wix 10102 filter an engine oil filter?
I just got my 2021 delivered, completely different this year, there's no overflow or fill reservoir, instead their is a plug on the top of the hydro for filling.
Hey Matt, I own a 2018 SCAG Liberty Z and I just changed my hydro oil. My right transaxle while in freewheel or bypass still rotates fwd and reverse. When it’s restored to normal configuration it continues to operate normally as it should…. Any ideas?
@@mattross6902 Hi Matt, The range of movement is identical to the left side. I have spoken with the dealership tech and two things came from that meeting… I’m past my warranty by 4 months and he furnished me with a pdf of all his shop manuals which are by far in excess information than a standard owners manual. His estimation there is a blockage in the internal shaft port preventing fluid from bypassing. In short it’s a teardown.
Hopefully you completed this successfully but if not and for others..Yes it is good to have the entire mower up in the air on jackstands. The oil filters and the covers/guards are easier to see if you remove the rear tires. Stock the filters are on via Godzilla strength so a good oil filter plier is needed. A filter socket didn't work for me because of limited space between the filter and the frame. With the tires/wheels off you can get an decent size oil pan under. I wouldn't do this without it jacked up and wheels off.
@@mattross6902 Lucky you. I suppose after 120 hours mine were sealed on pretty good. I have two different filter pliers and it took some oomphf to get the left off. I was able to fill using a funnel with a tube with the seat lifted up. I've used a oil pump before on transmissions but gravity worked well. How much oil did you have to add after running and purging air from the system/oil filters?
THANK YOU SIR , this video saved me a great deal of time and money , GOOD DETAIL INFORMATION , It is people like you that make UA-cam A GREAT SOURCE OF INFORMATION TO THE DO IT YOURSELF WORKING PEOPLE THAT DONT MIND GETTING THERE HANDS A LITTLE DIRTY , CHEERS NICK
Thanks nick glad to help! Great mowers
Thank you so much for making this video. I'm going to change my fluids for the first time and this video is going to be a big help.
Glad to help! Message me with any questions!
Thanks for all of your videos. Just bought one of these last year and servicing it myself saves a ton of money. Good quality videos and very straight forward instructions
Glad to help! Let me know if you have any questions!
@@mattross6902 After it was stored for winter I noticed it smokes every time I start it. Changed oil and oil filer as well as air filter. Didn't help. I had it serviced by the local Power Equipment Dealer I bought it from and they are telling me I need to replace the carburetor because I did not drain all fuel for the winter or used the special ethanol free gas they sell (So I broke it...). They also said this would not be covered by warranty and total cost is over $600. This does not seem right as the machine was only stirred for 3 months between uses. Is there anything I can do to clean the carburetor or change it myself
@@liniewski1 sorry I just saw this. I put startron in my gas every fillup. Since using it I've never winterized my small engines.
@@liniewski1 www.walmart.com/ip/Star-Brite-Star-Tron-Enzyme-FuelTreatment-8-oz-Treats-48-Gallons/26779501
@@liniewski1 I also allow the engine to warm up at least 1 full minute at idle before mowing.
Thanks for the video, I have the same mower and was wondering how this was done. Thanks again
I've had a Liberty Z for about 5 years now. The only trouble I've had is the yellow PTO switch that engages the blades went bad and caused a no start. It was easily and cheaply replaced with one from Amazon. It was still under warranty but it was easier and cheaper (not having to burn gas towing it to the dealer) to do it myself. Scag makes a great zero turn.
Yes very accessible components. I've changed engine and hydro oil and filters. Added gas and aired the tires. Sharpened blades once. That's it.
I stand corrected again, hydro pumps! I hope this video helps someone. It's given me a complex from all the criticism it has created! Happy 4th !
Thanks man! I would be lost without an explanation like this. As for the critics: most of them are constructive and just trying to help, but if they aren't they can go...well you get the idea.
@@jprevard Thanks bud! Let me know if you have any questions! I've done about everything on this, and am glad to help! The mower is great!
Thank you very much for the video sir. Lots of help. Have a great day. God Bless.
Glad to help! My mower has been virtually flawless. The gas gauge quit working that's it.
ALSO: About 10 hours after I changed hydro fluid and filters, I noticed the fluid in the reservoir appeared to be dark, discolored. I called the company that makes the Hydro pumps, the guy told me to dip my finger in there (there is no dip stick just Hot and Cold level lines) the oil on my finger looked brand new! For some reason the opaque reservoir looks deceiving. He said I was not the first one to call with that concern.
Good to know, I was just noticing that on mine.
This is so helpful. Thank you!
Glad to help!
My liberty z48 , 2023 , has tuff torq sticker on rear end of mower rear axle.
awesome scag
Can you fill it up through the plug jimmy Aust
You mention a faster way to fill the hydro pumps but don't elaborate. Is there a faster way to fill the pumps?
Also, I think it is a great video. Helped me a lot. Thanks.
Jason, drain it. Pull hose from bottom of reservoir and put oil in there!
www.amazon.com/Slippery-Pete-Fluid-GALLON-BOTTLES/dp/B07DTS8N7P
Jason this pump is awesome! Pull the bottom reservoir hose, couple it with this! Bam!
Getting ready to start mine. Lets see whats different hahaha
Do you still own the Liberty Z, if so, would you buy again? Pros and cons? I’m thinking about getting the same mower
Yes it now has 120 hours on it. Only problem I've ever had is my gas gauge broke. Kawasaki motor is flawless. I would only but a scag. Friends gave been through simplicitys and others but scag has been great!
Thanks for the reply
Very helpful thank you
Hey Matt Great Video!!! Have a quick question do you have to do the Air Purge I have the same exact mower. when changing hydraulic oil and filters
Yes
Thank you.
Hi Matt, any idea if using a semi synthetic 20w/50 instead of regular 20w/50 motor oil would offer better long-term protection and performance?
Don't know
That was a great video I hope my freedom z process is the same. Probably is
Any questions just ask!
Sooo my manual says it comes out the far end first? Weird.
Is the Wix 10102 filter rated for hydro pump pressure? The filter bypass relief valve operation could be questionable? Is the Wix 10102 filter an engine oil filter?
Wix 10102 is a spin on transmission filter specifically for hydro gear and other hydro applications.
www.filterspro.com/WL10102-WIX-Spin-On-Transmission-Filter_p_1989895.html
@@mattross6902 Awesome info
Thank you
Do you know a wix or other numbers for air filter
I just got my 2021 delivered, completely different this year, there's no overflow or fill reservoir, instead their is a plug on the top of the hydro for filling.
What's a pun?
@@mattross6902 my bad ill correct! dang phone.
Have you ever changed the hydraulic pump drive belt? Mine fell off and I'm replacing it.
No I've only ever changed oil/filters, and hydraulic fluid/filters, and the air filter. Greased and sharpen blades. 70 hours.
Hey Matt, I own a 2018 SCAG Liberty Z and I just changed my hydro oil. My right transaxle while in freewheel or bypass still rotates fwd and reverse. When it’s restored to normal configuration it continues to operate normally as it should…. Any ideas?
Sounds like the lever is not doing what it should. I'd ask the dealer.
@@mattross6902 Hi Matt,
The range of movement is identical to the left side. I have spoken with the dealership tech and two things came from that meeting… I’m past my warranty by 4 months and he furnished me with a pdf of all his shop manuals which are by far in excess information than a standard owners manual. His estimation there is a blockage in the internal shaft port preventing fluid from bypassing. In short it’s a teardown.
I'll add, when you drain it, make sure you are on level surface for the end at least, otherwise it's not all coming out
@@chuckcawthon3370 can you possibly email me those shop manuals? Techmatt70@gmail.com
Thanks
How many quarts of 20w-50 did it take to fill the pumps?
Hi Robert! Mine took just shy of 5 quarts! Thanks
Thanks Matt
I am not a mechanic I will take it in where I bought it and have them do it for me
IS THIS THE 36"" CUT MODEL ?
52
Does it need jacked up?
I prefer not laying on the floor.
Hopefully you completed this successfully but if not and for others..Yes it is good to have the entire mower up in the air on jackstands. The oil filters and the covers/guards are easier to see if you remove the rear tires. Stock the filters are on via Godzilla strength so a good oil filter plier is needed. A filter socket didn't work for me because of limited space between the filter and the frame. With the tires/wheels off you can get an decent size oil pan under.
I wouldn't do this without it jacked up and wheels off.
@@mattallisi6572 my stock filters were barely finger tight.
@@mattross6902 Lucky you. I suppose after 120 hours mine were sealed on pretty good. I have two different filter pliers and it took some oomphf to get the left off.
I was able to fill using a funnel with a tube with the seat lifted up. I've used a oil pump before on transmissions but gravity worked well.
How much oil did you have to add after running and purging air from the system/oil filters?
@@mattallisi6572 I changed my hydro fluid after 20 hours. I change it once a year now. I only put on 40 hours per year. Not much after purge.
Do I purge it with the overflow bolt off?
No. Everything assembled. It purges air out the reservoir vent cap.
@@mattross6902 thanks. Any tip on getting the hydro filters off? Wrench slips and my hands can't get enough grip to turn even with good rubber gloves
@@04tacomaguy1 try when hot. I never had a problem removing them. As a last resort shove a screwdriver through the filter away from the thread side.
@@04tacomaguy1 or large channel lock pliers.
@@mattross6902 about to try the channel lock idea now.must have had the strongest guy in factory putting filters on that day lol
I have a 2022 liberty z that didn’t come with a Reservoir
Probably sealed hydros then. They usually last 500-600 hours sealed
@@nickspaulding1511 Scag did away with the reservoir.
I need 2 more quarts.
I swore my freedom z says the right fills up first
Yes different mower.
They're not "motors" they're are "hydro pumps"
I'll be very brief on this, thanks.
I'm glad you watched it that far! I hope it helped!