Thank you for making a COMPLETE video that shows whether the duplicates actually work! So many video posts on here do not show whether the keys they made with this machine actually work. Thank you for walking the process all the way through! You probably saved me $10 and a lot of time.
You tricked the machine, you entered a KW1-shaped key and it gave you an LW4 key, they are very close but not the same, it can work but you need to hold the key in the side groves to cut it, as the lock uses the side grove to centre the key in the lock. Being you are in the USA and Kwikset the lock manufacturer is also from the USA I'm surprised they can't tell the difference .. It's easy to see the difference, with both keys on the side look at the middle grove along the key and its difference in size. Now look at the deepest cut and see how close it is to the centre groove, you can see it's not the same. Yippee,, I may still have a job is 5 years, it looks like the robots are not taking over just yet !!
I used one of these today for the first time, before watching this. It was a delightful experience, and my key worked, but I did two things differently. I didn't have to push on my key and hold it in the way you did, probably because I left it on a heavy keyring with other keys. The weight of the ring must have stabilized the position of the key in the 3D "ignition". And I sprung an extra $2 for the pink because I am tired of using nail polish to color code my keys. I doubt the color made a difference. I would say don't use the machine if it doesn't start when you insert the key and let go.
I used this machine yesterday and also did not have a great experience. Left the key in to scan dimensions. Machine wanted 5 dollars, and when I backed out, gave me a 33% discount. It then asked if I wanted a smoother cut key for additional cost (still added up to 5 dollars then). I said no and the key was cut very rough with burrs on the edges. The patterns didn't match up too well in some areas and one was missing altogether. It did work at home but takes some wiggling and pulling back. I filed down the key more similar to the original key pattern and cleaned the burrs. It works but takes some time to get all the pins to match the pattern in the lock.
Just so you know, the vallies in the key does all the work for unlocking. Looking at original vs copy, The original has a deeper cut on all 4 bits(The official name of the vallies in a key) going closer to the alignment groove, meaning all the pins in the lock are too high.
You should not have held onto the original key while it was being copied. If you just leave it in, the copy will be more precise. I used this model of machine today on three keys and they work perfectly.
Thank you for sharing the helpful video! 👍🏼😊 The comments in the video were also helpful as well: glad to know the tips everyone shared and that you got a refund for the key that did not cut correctly
There is no help with that machine. Is self-service and athomated. However, i did try one more time recently and this time took it to their brush machine and brushed the keys to make sure it does not have sharp edges. After this attempt, the recently key i made did work this time. So it may be worth the try, but for sure brush the keys with rough wired brushes to smoothen the edges.
Oh wow! Now I know not worth trying out. I see these machines at in Walmarts. I'm glad I saw this first. It looks fast and straight to the point and time saving but at the end It just takes your money and doesn't deliver anything in return. Then you're just stuck with a bogus key that doesn't work.
I am not sure about that, but i had the same issue at my dorm, and i came up with another solution. I unscrewed the arm of the hydraulic jack on top of the door that keeps closing the door behind you. So the door became a normal door without that hydraulic automatic locking mechanism. Tell him just to unscrew the arm, and it will solve the issue. But do not tell the security or others ;)
I used the same type of machine at menards. Only takes credit card, was way to expensive and then credit card charges on top of key price not worth it.
Thank you for making a COMPLETE video that shows whether the duplicates actually work! So many video posts on here do not show whether the keys they made with this machine actually work. Thank you for walking the process all the way through! You probably saved me $10 and a lot of time.
I'm glad i could help you. 🤗
Please consider to subscribe if you haven't already. Will be appreciated.
You tricked the machine, you entered a KW1-shaped key and it gave you an LW4 key, they are very close but not the same, it can work but you need to hold the key in the side groves to cut it, as the lock uses the side grove to centre the key in the lock. Being you are in the USA and Kwikset the lock manufacturer is also from the USA I'm surprised they can't tell the difference .. It's easy to see the difference, with both keys on the side look at the middle grove along the key and its difference in size. Now look at the deepest cut and see how close it is to the centre groove, you can see it's not the same. Yippee,, I may still have a job is 5 years, it looks like the robots are not taking over just yet !!
Ur great
I used one of these today for the first time, before watching this. It was a delightful experience, and my key worked, but I did two things differently. I didn't have to push on my key and hold it in the way you did, probably because I left it on a heavy keyring with other keys. The weight of the ring must have stabilized the position of the key in the 3D "ignition". And I sprung an extra $2 for the pink because I am tired of using nail polish to color code my keys. I doubt the color made a difference. I would say don't use the machine if it doesn't start when you insert the key and let go.
thanks...used it today....worked perfectly....prices were higher...9 dollars for 2 copies...no option to pay at machine...had to go to checkout...
I used this machine yesterday and also did not have a great experience. Left the key in to scan dimensions. Machine wanted 5 dollars, and when I backed out, gave me a 33% discount. It then asked if I wanted a smoother cut key for additional cost (still added up to 5 dollars then). I said no and the key was cut very rough with burrs on the edges. The patterns didn't match up too well in some areas and one was missing altogether. It did work at home but takes some wiggling and pulling back. I filed down the key more similar to the original key pattern and cleaned the burrs. It works but takes some time to get all the pins to match the pattern in the lock.
FYI I tried it w/multi tricky keys of all sizes & all came out just fine at my local hm depot as of Aug 2022.
Thanks Lisa. I give it more try. Glad you had a good experience. Or maybe they updated their machines since then!
Just so you know, the vallies in the key does all the work for unlocking. Looking at original vs copy, The original has a deeper cut on all 4 bits(The official name of the vallies in a key) going closer to the alignment groove, meaning all the pins in the lock are too high.
Thanks for yhe comment Alexander
You should not have held onto the original key while it was being copied. If you just leave it in, the copy will be more precise. I used this model of machine today on three keys and they work perfectly.
Thanks for letting me know. I did kot try to hold it. Just wanted to make sure it is not loose.
Thank you for sharing the helpful video! 👍🏼😊 The comments in the video were also helpful as well: glad to know the tips everyone shared and that you got a refund for the key that did not cut correctly
Thank you dear. If you liked it pls consider to subscribe as well if yiu haven't already. It help me to make more useful videos.
Very affordable still I remember they use to be 99 cent for cheaper ones that’s a nice one for the cheapest one and for cost I’m going this morning
Thank you so much! You've saved me a lot of time!
Lowes has these as well, works perfectly
does it take cash?
Yes. You pay at the cashier.
did home depot actually help you or did u try it again?? or did they update the machines???
There is no help with that machine. Is self-service and athomated. However, i did try one more time recently and this time took it to their brush machine and brushed the keys to make sure it does not have sharp edges. After this attempt, the recently key i made did work this time. So it may be worth the try, but for sure brush the keys with rough wired brushes to smoothen the edges.
@@LetsTryThis10did you have to pay extra for the brush machine?
Oh wow! Now I know not worth trying out.
I see these machines at in Walmarts.
I'm glad I saw this first. It looks fast and straight to the point and time saving but at the end It just takes your money and doesn't deliver anything in return.
Then you're just stuck with a bogus key that doesn't work.
Will this work on Do Not Duplicate keys? My son keeps locking himself out of his dorm room when door shuts behind him in lock mode.
I am not sure about that, but i had the same issue at my dorm, and i came up with another solution. I unscrewed the arm of the hydraulic jack on top of the door that keeps closing the door behind you. So the door became a normal door without that hydraulic automatic locking mechanism. Tell him just to unscrew the arm, and it will solve the issue. But do not tell the security or others ;)
That point in the front is overlifting that pin. File it down
Did you get your money back
Yes i got a refund.
If you jiggle the key it will work
Use a file or wire brush to bring it down. Or else get a key cut at a local locksmith.....
I actually did it at homedepot. They also had a manually operated machine that we created a new one that worked better. Thanks for suggestion though😉👍
I have the key it does work but you have to jiggle it to make it work
I used the same type of machine at menards. Only takes credit card, was way to expensive and then credit card charges on top of key price not worth it.
Anybody know if they work on vehicles
I am not sure. But i am sure homedepot can answer that. Or their website may have some info.
Manufacturer name of this machine??
Sorry, I don't know, !actually
Did u pay ? How w cash or card
Wow a a they don’t need a person there to stand there and sand it and wait there but I’d love a puppy key
On this machine you purchase the key at the cashier not machine!
They now have your make of vehicle and lic plate and home address 🤣
You should spray some WD-40.
just file down the piece that is too high.
keys don't need to be perfect, you could definitely get that key working with nothing but a nail file
Just pay for a service and then do part of the job yourself? No thanks.
@@fluxington If the time investment + the cost of the incomplete service is lower than the next best one, you're still better off
Oko
Go see a locksmith
What's the point of this video???
Crap machine
Ive been doing it for years. I have never had one issue.
May be my bad luck!