Gigmaster, I see you got the newly designed locking shoe. You can now run the antenna wire, out of the top of the shaft, without drilling holes. You’re welcome! Don added the second groove idea and I think he made some other adjustments. Basically. Run the antenna wire through the shaft, lay it in the grove (on the bottom of the locking shoe), push the shoe into the shaft and insert the two screws.
GaMatt, I wasn’t clear in what meant, but he only seems to COMPLETELY build the custom White headphones that he specially makes for individuals. This is from an email discussion he and I had a week ago: “All three Headphones, GGAs, Threshers and Mine use my speaker frame design and are similar….I build these speaker/frames for DetectorPro (GGA) and Detecting Adventure (Threshers). The Threshers and GGAs use a different strain relief sleeve and the cord on the Threshers is longer.” He also said, “The frames, cups and headbands for the GGAs and Threshers come from the same manufacturer and are identical except for the color.” But he didn’t indicate that he was involved in these parts. If so, then he personally builds all three.
I just received my new WSA II XL headphones! These things sound amazing! I wish the version of my D2 would have come with them. I was using the detetcnix headphones that the puck slides into. They were alright but nowhere as loud and clear as the wsa ii xl headphones.
I've got the same headphones the yellow ones they're amazing plenty of volume. Also that lower shaft you're talking about with the split in the bottom to where you couldn't tighten it it's designed that way for the HF coil. That's because of the wire that connects to the battery up on the shaft you have to run the coil wire up through that slot to the battery. And your coil hardware the bolt the washer and that little cone shaped spacer plus it also came with a spacer that fit up in there in the gap of the lower rod. So basically just don't order any more for the HF coils for the D1 and everything will be fine
Gigmaster, I’ll wait to buy headphones, until you review the Grey Ghost. When are you supposed to get them, and start testing? Good video. You were the first, I’ve heard, to mention the “square way” audio info. So, you are now using square pitch? You said Thresher use square and detect-Ed got you using pitch.
I like the new version of the shoe by detecting doodads even has slots in it for the wire to go through so you can put it through your shaft like you did wasn't sure if you had the same problem I did with the very first version cuz I had mine replaced also the second version seems to be strong though 👍🦀
Pass some advice onto Don, tell him to ask the company to make headphones for the equinox because the gray ghost ones are garbage....they have been sent in for repair twice and I go easy on them.
I agree I bought the grey ghost for the Equinox and sold them because of the volume. Don does have the Threshers for the Nox and they are loud. Johnboy has some.
Gigmaster, I see you got the newly designed locking shoe. You can now run the antenna wire, out of the top of the shaft, without drilling holes. You’re welcome! Don added the second groove idea and I think he made some other adjustments.
Basically. Run the antenna wire through the shaft, lay it in the grove (on the bottom of the locking shoe), push the shoe into the shaft and insert the two screws.
Your rigs look great! Now you can add some neoprene padding to your arm cuff and you have the ultimate rods! Pretty work!
Threshers are made by Tony Eisenhower and he makes great headphones. 👍 Matt
He is a good man
He makes the Grey Ghost as well
@@Detectken nope. He helped design them. He doesn't make them.
GaMatt, I wasn’t clear in what meant, but he only seems to COMPLETELY build the custom White headphones that he specially makes for individuals. This is from an email discussion he and I had a week ago:
“All three Headphones, GGAs, Threshers and Mine use my speaker frame design and are similar….I build these speaker/frames for DetectorPro (GGA) and Detecting Adventure (Threshers). The Threshers and GGAs use a different strain relief sleeve and the cord on the Threshers is longer.”
He also said, “The frames, cups and headbands for the GGAs and Threshers come from the same manufacturer and are identical except for the color.” But he didn’t indicate that he was involved in these parts. If so, then he personally builds all three.
@@WildDigger oops. I didn’t link you in my last response.
Thanks for sharing updates.
Thank for sharing Gigmaster
I just received my new WSA II XL headphones! These things sound amazing! I wish the version of my D2 would have come with them. I was using the detetcnix headphones that the puck slides into. They were alright but nowhere as loud and clear as the wsa ii xl headphones.
I've got the same headphones the yellow ones they're amazing plenty of volume. Also that lower shaft you're talking about with the split in the bottom to where you couldn't tighten it it's designed that way for the HF coil. That's because of the wire that connects to the battery up on the shaft you have to run the coil wire up through that slot to the battery. And your coil hardware the bolt the washer and that little cone shaped spacer plus it also came with a spacer that fit up in there in the gap of the lower rod. So basically just don't order any more for the HF coils for the D1 and everything will be fine
It is the one that came with the Deus II.
Great vid Gig, thanks
Gigmaster, I’ll wait to buy headphones, until you review the Grey Ghost. When are you supposed to get them, and start testing?
Good video. You were the first, I’ve heard, to mention the “square way” audio info. So, you are now using square pitch? You said Thresher use square and detect-Ed got you using pitch.
Thanks Steve 👍🇬🇧
with that kind of headphones can I use PWM sound on beach programs?
Great Info! ...Thanks!!
I like the new version of the shoe by detecting doodads even has slots in it for the wire to go through so you can put it through your shaft like you did wasn't sure if you had the same problem I did with the very first version cuz I had mine replaced also the second version seems to be strong though 👍🦀
Hey Gig, they look exactly like grey ghost just a different color?
Testing grey ghost out this week!
yeah got my charger
Thanks for the input
Pass some advice onto Don, tell him to ask the company to make headphones for the equinox because the gray ghost ones are garbage....they have been sent in for repair twice and I go easy on them.
We have those available.
I agree I bought the grey ghost for the Equinox and sold them because of the volume. Don does have the Threshers for the Nox and they are loud. Johnboy has some.
👍🏻