Air ride blowing fuses/Air leak on my 00 Silverado 🤔

Finally figured out why my compressors were popping both of my 40 amp fuses and air leak. I had my air suspension installed for 2.5 years without any maintenance so it was time to change the air filters on my compressors but I was able to clean them out with compressed air! It actually works but I will still order replacement filters for the feature if these deteriorate. And the check valves are good now not letting air leak again.
Channel shirts #ad amzn.to/47aNiVR
Premium T-shirts #ad amzn.to/43SFpS1
Pullover Hoodies #ad amzn.to/3OhbqO8
Check valve I used 1/4 female to 1/4 male #ad amzn.to/49uCLVY
Loctite thread sealant #ad amzn.to/3wbnQS5
Compressor isolator mount to reduce noise and vibration #ad amzn.to/3SAeC9O
Viar filter assembly with 1/4 #ad amzn.to/42AW7Gy
Save 15% off www.auxito.com... On any of Auxitos items with my code Migo713
Disclaimer: The information provided in this UA-cam channel is intended for educational and entertainment purposes only. The techniques, modifications, and suggestions demonstrated are based on personal experiences and should be performed by individuals with appropriate skills and knowledge. It is essential to prioritize safety, follow manufacturer guidelines, and comply with local laws when modifying or operating any vehicle. The creator of this channel shall not be held liable for any accidents, injuries, or damages resulting from the use or misuse of the content provided. Viewer discretion and responsibility are advised.

[@JayeRock]

I’m not bagged, but it’s still good to know what to do, great video 👀🌎✅🏆

[@MiGo713]

For sure!! and Thanks!💯💯💯

[@rpelonm]

Im tryna mold my bedsides but having trouble can u make a vid on how tf u molded the bed rails and what all u used pls

[@MiGo713]

I didn’t do it but all they used is fiberglass and some bondo

[@1franv]

What did you do to smooth the bed rails

[@MiGo713]

I had them closed with fiberglass and bondo, but the guy didn’t do a good job. So I still need to have them redone

[@juanvelazquez7709]

Hey bro I’m trying to do clutch fan to electric fan on a 04 Tahoe 5.3 can u guide me the correct way of doing it ? I watched ur video but still confused or how much will u charge me to do it

[@MiGo713]

The correct way of doing it would be to get the factory fans and wire harness from a 05-06 Model Gm truck and take it to a shop that can pin the PCM for you with the tune. Or doing it manually how I did here on my Tahoe, I don’t have a shop now so not able to work on cars at the moment