Mate good video. I have nearly finished the same project but with a steel tray on my d40. With the wiring I cut the excess out and rejoined them with soldering and shrink wrap
Love the short tray look too. I'm going to build a custom tray for my d40 in the states. Do you need the tray to sit so high for wheel clearance? Seems alot of height from risers.
Thanks mate! It’s a crg delete pipe and the standard exhaust, I just cut the muffler off! Hasn’t thrown codes and I’ve had it over 10000kms! Thanks for watching
Shannon Stubbs hey mate, depends what you get and how you do it! But just the tray cost me about 1000$ after I paid for some Welding and product to clean it! But could be anywhere from 500$ - 2k for a tray fitted
Mate I fabbed up an L shaped bracket to take a 42mm (I think) muffler clamp. Welded the bracket to the tray and the muffler clamp holds the filler pipe in place on the bracket. I had to take the steel filler pipe out cut a very small V out and weld it back together to get the correct so it didn’t foul on the tray or chassis
Mate good video. I have nearly finished the same project but with a steel tray on my d40. With the wiring I cut the excess out and rejoined them with soldering and shrink wrap
Sounds bloody mint mate!!
Mate been binge watching all these build up vids, keep it up 👍
Thanks mate, really appreciate that!
Do you have any idea if the stock tray was heavier than the alloy one? Guessing it would be heavier.
Hey man what were your dimensions for the rear custom tail lights
Love the short tray look too. I'm going to build a custom tray for my d40 in the states. Do you need the tray to sit so high for wheel clearance? Seems alot of height from risers.
hi mate! no you dont need it so high! the tray already came with the lift on it so i decided to keep! and also i plan on body lifting the nav :)
Hey mate why do you have to use the inox? It is just the inox mx3 right?
Is that tray off the same model car mate? Or did you have to move the mounting brackets around to suit..
It’s a triple M tray from a navara!
Is the exhaust a straight-pipe or is it just a 3 inch?
Nice man, probably going to do the same to my rig soon
Hey mate how much did the fab shop charge you to weld up the bar on the headboard? Cheers.
Matthew Randone carton of beer! So about 50$ 😂
@@RoamLyfe haha no shit ! Need mine done, hopefully they don't charge an arm and a leg
Just go over and say can one of you boys weld this up on your lunch break for a cashie! That’s what I said. 😂
@@RoamLyfe ahahaha fair enough. Good idea 🤣
Looks killer mate! That ally cleaner is magic. Whats the exhaust setup on the rig?
Thanks mate! It’s a crg delete pipe and the standard exhaust, I just cut the muffler off! Hasn’t thrown codes and I’ve had it over 10000kms! Thanks for watching
What it cost mate to get it to that stage on the video and what the old tray come off cheers
Shannon Stubbs hey mate, depends what you get and how you do it! But just the tray cost me about 1000$ after I paid for some Welding and product to clean it! But could be anywhere from 500$ - 2k for a tray fitted
@@RoamLyfe Was this a tray off a np300? Or can you get any aluminum tray and it will fit?
Great video.
Hey man what did you end up doing with the filler next? And I just watching your latest video and was wondering what under tray tool boxes you have
Hey mate it’s zip tied to the underside of the tray! Haha not ideal but it works! Also they are custom made infill panels 😊
Old tek screw job aye gotta love it
Hahaha, oh mate! I freeking love my tek screws 😂😅
How did you end up mounting your fuel filler
Hey how did you end up fitting your fuel filler neck
Zip tied it to the tray haha
Mate I fabbed up an L shaped bracket to take a 42mm (I think) muffler clamp. Welded the bracket to the tray and the muffler clamp holds the filler pipe in place on the bracket. I had to take the steel filler pipe out cut a very small V out and weld it back together to get the correct so it didn’t foul on the tray or chassis
Killa mod welldone
hey man, how much lift did you go? 3n2 or 4n2?
David Le hey mate! It’s 4” front standard rear!
@@RoamLyfe ahhh interesting, whats your reason behind stock rear?
sick vids doode
Is that you boss? I've done all his tattoos! Small world
Yeah it is mate! I actually know of you, Jess did mine when she was at ink attack! Definitely a small world!!
@@RoamLyfe yeah rad! Well keep up the good work, loving the videos. Might see you up the beach one day.