Це відео не доступне.
Перепрошуємо.
Freewing F14 Controls Setup - Freewing Settings
Вставка
- Опубліковано 19 сер 2024
- In this video I'm rebuild the F14 after it was shot down by a Russian energy beam(see video on channel). For this rebuild I wanted to set up the F14 as intended by Freewing where the elevators acts as elevons. The one mod I wanted to make was to disable the wing ailerons when the wings were swept as with the ailerons active the jet may be unstable with the wing sweep.
This setup is different from the previous setup I made as in that video I wanted the traditional elevators and not elevons. The video for that setup is:
• Freewing F14 Programming . I have flown this setup and it works fine.
The setup in this video I have not flown yet.
Ciao dove posso comprare le piastre per rinforzare la struttura sopra i carrelli
Grazie mille
Li ho presi da Dustin al Raven Roc Toc. La sua email è: ravenrocktoc@gmail.com
Potrebbe essere necessario tradurre in inglese per lui.
@@Zek1701 grazie mille sai il prezzo
@@antoninocorso4051 Ho ordinato il mio nel gennaio 2021. Costava $ 95 + $ 15 di spedizione USD.
@@Zek1701 spero she.spedisce in Italia se mi risponde hp mandato email ma per caso a il negozio di modellismo come si chiama. Grazie
@@antoninocorso4051 Questa è solo una persona che effettua questo aggiornamento. Non c'è una vera compagnia. Ecco un collegamento:
www.rcgroups.com/forums/showthread.php?4011865-Freewing-F-14-Landing-Gear-reinforcement
I'm not seeing a link for your f14 basic setup. Also are you plugging in your ubec/bec into your bind port on your receiver?
See video description below video for the link to the other setup video.
I plug the ubec into a y-harness with the throttle. This way the bind port is free to plug bind plug in.
Ubec supposed to come directly off the battery connection buddy.
I have done 12 channel planes and never had a rats nest like i see here