Here is the troubleshooting I did in our provision refrigeration system #ETO #marineelectrician #leckyjake #refrigeration #evaporator #seaman #seafarer
As always excellent and informative video keep them coming. This is a common problem I’ve encountered this many times but the Chief just had me use hot water to break up the ice 🧊
its up to you to research,. they teach you what you need to know the rest is up to you. your going to have to learn how to learn. you will have to start thinking for your self now, no one can teach you everything, no one!
thank you for making very informative video -as you mentioned at the end waiting video regarding other problems facing on refrigeration ,keep doing very good work lecky
Salamat Po!Keep in mind my friend that as ship's ETO to deal with refrigerators and A/C IS NOT YOUR OBLIGATION OR JOB!!!Where is your engineers?Scratching the ases in ECR perhaps?Let them do their job where a refrigeration systems is one of their duties!
It depends on the situation on board. Sometimes you have engineers who are so helpless... Better to do it by yourself to be sure that job is done and nobody gives you extra problems when doing some shit there. Sometimes you knowleges much better than your team in this area, and if people on board are good- better to help them) But if there are lazy stupid motherfuckers- of course send them to do their job))😅
Thankyou sir very informative .. seaferer din ako passenger vessel mag isa lang din po ako na reefer dito ... upload ka din sir sa trouble ng chiller compressor
Your videos are the most simplified and well explained. Keep posting such. It has been a great practical knowledge booster for many of the youngsters like us😊👍🏻
Good job sir jake kaya pala nag ice build up yung evaporator ng chiller dahil d wastong pagset yung TXV..lage po ako nanonood sa vlog nyu sir.sana palarin gaya nyu po.
Hi,, thanks for the vedio which is very usefull.. Lecky,, I have a same trouble which is Ice deposit on expansion valve. I have cleaned inside filter and run the system. But trouble is remaining still. Unfortunately , I dont have a spare one onboard ...😒
Our Blaster Freezer room (-40C) frequently have icing on the floor (we have proper door with gasket and curtain strips but hot air from outside or products when we push the hot product into the room to freeze them). Our floor has changed to use PU to reduce icing and anti-slip yet still have this issue... do you have any suggestions?
How we know we increased or decreased superheat by turning the screw.is there any marking for clock wise and anticlock wise for increased or decreased the superheat
Hi Elect, thank you for the video, just curious if the vegetable room have evaporator pressure regulator since the piping is interconnected with meat and fish freezer? Means both suction pressure are the same. Provision compressors on this video is Bitzer / Sabroe open type.
Hi! Lecky Jake good day to you. Elect I have a question maybe you can help me. My question is, what is the common caused or the problem of the Cylinder head and the line in Marine Refrigeration Icing?
Kindly it would be nice to elaborate on superheat thing. First of all if the system was running fine before this problem happened and there was no work done on the TXV of veg room . So why to solve the problem we have to open the TXV more . As we know it has been set by factory before it was fitted as per requirement of the system. That clearly says that TXV should automatically open more as per the operational requirement. That means opening pressure due to the bulb sensing is not sufficient to maintain the superheat. Though the action solved the problem but I feel if TXV is malfunctioning then it needs to be changed so that it maintains the temperature in the previous setting of the TXV.
Risk to open too much is flooding back and damaging the compressor. However, at sea those TXV are subject to a lot more mechanical disturbance than on land.
Hello leckay goo day! may tanong lang po ako sa reefer provision namin ang MEAT ROOM hindi mag auto start...pero mag auto stop naman? Pls. share your a good idea..
in bitzer semi hermetic compressore,when we start it then temperature down -25°C.after then temperature reached -7°C and after again not reached to -25°C.so what can i do to solve this problem??
Sir good day po ano po cause of trouble at pwede gagawin sa Accomodation aircon po namin laging nag yeyelow ang evaporator side kaya mag trip ang aircon. Ang suction side pressure nya po normally nasa 0.4 to 0.5bars peru pag nag yellow na sya umabot nalang nang 0.10 to 0.12 tsaka mag trip.
Hi sir I have one doubt my ship ECR remote control one problem 30 hour one bridge panel fail alarm coming, I am acc the alarm that time alarm is going ,Agin this alarm is come, last two day this alarm is come, how to find out sir please tell me
Lodz pwede ba humingi nga advice? Sa marine refrigeration na may 404a na gas. Ang freezer o evaporator ay walang fan modified na chest type freezer na may special liquid sa loob. Ano ba ang magandang karga para mabilis ma reach ang -20°C ng cabinet? Sa karaga kasi na 8psig kaya naman kaso ubod ng tagal bago ma reach ang -20°C aabutin ng 16 hours pwede bang abutin lang ng 4 hours? TXV ang gamit.
Dear Jake, Icing on evaporator ,so you reduced the super heat by turning it into counter clock wise. Actually here, superheat was "increased". I believe it's done after turning the adjustment screw to "clock wise ."
Thanks for sharing this refrigeration information, along with your electrical information as well! 🙂
Very Nicely explained. I am excited to see your next video on Provision refrigeration troubles. Thanks
Very good video and explained. I am excited to see your next video on Provision refrigeration troubles. Thanks
Informative and on point- thanks for putting this together!
Thank you Jake... expecting more videos related to refrigeration and air condition....Thank you...😊
Thanks leaky Jake hope can hear more knowledge from you
As always excellent and informative video keep them coming. This is a common problem I’ve encountered this many times but the Chief just had me use hot water to break up the ice 🧊
Godbless po!,please keep posting such knowledge and ideas👍👍👍
Sir salamat Po sa mga idea ng mga troubleshooting..
❤️Keep safe all
Very informative sir thank you for sharing your expertise ingat lagi SA paglalayag God bless
Good share from kabayan base on his experience faced on board ship recently as it also can advance to someone else knowledge about fridge system...😊
Your video cover much more than what institutes teach us. Awesome video 👌🏻
its up to you to research,. they teach you what you need to know the rest is up to you. your going to have to learn how to learn. you will have to start thinking for your self now, no one can teach you everything, no one!
thank you for making very informative video -as you mentioned at the end waiting video regarding other problems facing on refrigeration ,keep doing very good work lecky
Thank you for the support
Salamat Po!Keep in mind my friend that as ship's ETO to deal with refrigerators and A/C IS NOT YOUR OBLIGATION OR JOB!!!Where is your engineers?Scratching the ases in ECR perhaps?Let them do their job where a refrigeration systems is one of their duties!
It depends on the situation on board. Sometimes you have engineers who are so helpless... Better to do it by yourself to be sure that job is done and nobody gives you extra problems when doing some shit there.
Sometimes you knowleges much better than your team in this area, and if people on board are good- better to help them)
But if there are lazy stupid motherfuckers- of course send them to do their job))😅
very informative Elec. thank you
Thankyou sir very informative .. seaferer din ako passenger vessel mag isa lang din po ako na reefer dito ... upload ka din sir sa trouble ng chiller compressor
Thank you for the knowledge. Keep it up!
Thank you for your support
Great job✅
Your videos are the most simplified and well explained. Keep posting such. It has been a great practical knowledge booster for many of the youngsters like us😊👍🏻
Thank you very much. Next video is the modification of wiring diagram
Thanks a lot for sharing your thoughts
Thank you sir lecky for another knowledgeable ideas.
Thank you for your good comments
Thanks for your video sir. It's very helpfull 🙏.
Excellent,,
Nice very informative video. Just piece of advice much better and safer to use water in defrosting expansion valve.
Napaka systematic mo talaga sir pag apporach sa problem. Thumbs up!
Thank you and sana meron ka din sayo na yung convinient ka sa ginagawa mo. Safe sailing
Good job sir jake kaya pala nag ice build up yung evaporator ng chiller dahil d wastong pagset yung TXV..lage po ako nanonood sa vlog nyu sir.sana palarin gaya nyu po.
thank to your sharing kabayan God keep
bless you
Nice video sir thanks
Excellent!
Keep posting sir tnx
Nice bro, thank u for the knowledge
Very Nice . Thank you.
I am studying for eto now... Urs video r very useful to me.. Thank u
Thank you for watching
Thank you so much sir, stay safe always!!!!
Thank you
This is the best Refrigeration field for a job. Excellent trouble shooting. 9/30/2022yr
Very good vedio ..after watching yr vedio thing came in my mind Is let me first subscribe then go for next😂
Super valuable Sir .
Same problem in my meat room .
I will try this method
Hi,, thanks for the vedio which is very usefull.. Lecky,, I have a same trouble which is Ice deposit on expansion valve. I have cleaned inside filter and run the system. But trouble is remaining still. Unfortunately , I dont have a spare one onboard ...😒
Thanks for the video!!!
Thank you so much for your information
What a cool job! Sailing the beautiful seas and keeping the vessel's systems in ship-shape!
Only a guy that has never worked on sea can say that (marine engineer with 14 years expirience)
@@pjero2005 Maybe true, but I still think Lecky Jake has an enviable job!
Sir please keep on update more knowledge eto videos
Thank you for the support
Nice video lecky 👍🏻
Thank you for the support
Sir good job Sana mag labas ka din ng video kung paano ang adjustment ng txv sa ice machine tnx sir
A Lot of tHanks for the vídeo
Salamat sa idea master
Our Blaster Freezer room (-40C) frequently have icing on the floor (we have proper door with gasket and curtain strips but hot air from outside or products when we push the hot product into the room to freeze them). Our floor has changed to use PU to reduce icing and anti-slip yet still have this issue... do you have any suggestions?
Thank you.
What will be the problem if i get ice only on expansion valve but not on Evaporator.
I'll love to be side by side with you while you do the troubleshooting,,, I'll be asking 2 million questions 😂😂
Sir sana next video Po charging of refrigerant..at ano procedure safety ways
how about back pressure control valve on the evaporator out let? does it function correctly? need adjustment. i guess.
nice galing
Thank You po Sir Leckyjake👍🙏☺️
👍👍👍
Slmat sir lecky jake
Salamat lecky
Hi thx u for the content , I got confused when u lower the super heat the ice will be melted? Isn't increasing the heat will melt the ice
Thanks very much.
How we know we increased or decreased superheat by turning the screw.is there any marking for clock wise and anticlock wise for increased or decreased the superheat
Thankyou sir...very helpful ❤️
Thanks for the support
Super thank you sir
Excellent Trouble shooting a superheat adjust ment needed. 10/30 2021
Sir where can you buy that magnetic solinoid tester?
Tnx for sharing,,,,
Thanks for watching
Sir good day , what pressure of refregirant for low and high pressure can you say that your refrigerant is enough ??thankyou
Hi Elect, thank you for the video, just curious if the vegetable room have evaporator pressure regulator since the piping is interconnected with meat and fish freezer? Means both suction pressure are the same. Provision compressors on this video is Bitzer / Sabroe open type.
Hi! Lecky Jake good day to you. Elect I have a question maybe you can help me. My question is, what is the common caused or the problem of the Cylinder head and the line in Marine Refrigeration Icing?
Kindly it would be nice to elaborate on superheat thing. First of all if the system was running fine before this problem happened and there was no work done on the TXV of veg room . So why to solve the problem we have to open the TXV more . As we know it has been set by factory before it was fitted as per requirement of the system. That clearly says that TXV should automatically open more as per the operational requirement. That means opening pressure due to the bulb sensing is not sufficient to maintain the superheat. Though the action solved the problem but I feel if TXV is malfunctioning then it needs to be changed so that it maintains the temperature in the previous setting of the TXV.
😊
Risk to open too much is flooding back and damaging the compressor. However, at sea those TXV are subject to a lot more mechanical disturbance than on land.
Is there any filter near the exp valve
Thanks for this video sir more power to you,anyway sir where you can bought your tool permanent magnet it is so nice?
I can see there is always lot of ice formation on the door sometime it is very impossible to open what could be the reason pls reply
wher
which turn direction in that case sir...the ice build up problem,,,1 full turn left or right?
what is cause of the freezing expansion valve?
Hello leckay goo day! may tanong lang po ako sa reefer provision namin ang MEAT ROOM hindi mag auto start...pero mag auto stop naman? Pls. share your a good idea..
by freezing, possibility, thermostat, coolant, or some leak in ducts etc.
Very good job 👍
in bitzer semi hermetic compressore,when we start it then temperature down -25°C.after then temperature reached -7°C and after again not reached to -25°C.so what can i do to solve this problem??
After wait is end 🥰🥰🥰
Thank you for your support
Good one sir. Sir how did u adjusting the manual txv value did there is any specific adjustment value is there ah sir
Sir good day po ano po cause of trouble at pwede gagawin sa Accomodation aircon po namin laging nag yeyelow ang evaporator side kaya mag trip ang aircon. Ang suction side pressure nya po normally nasa 0.4 to 0.5bars peru pag nag yellow na sya umabot nalang nang 0.10 to 0.12 tsaka mag trip.
Normaly expantion valve how many turn Jack , ❤❤❤
Nice videos, which ships are you sailing on ?
Could you please explain the fish room tem. Not coming more then -15 dig set tem. Is -18 dig. Meat room mainten 18dig.
Nakasubscribe na bro...
Thanks
Sir tanong lang po pag nag yeyelo ba ang adjust ba natin ay counter clockwise o clockwise thanks po
Sir you are my favorite one ❤️
Lots of love 💕
Keep making knowledgeable videos and share your experience 🙏🏻
Thank you for your wonderful comment. This is what I need to keep me going
Happy to see your reply i will always support you ❤️
@@leckyjake plz give ur mail address
Sir tanong ko lang po Kung.. ano pag kakaiba ng oil separator, accumulator, liquid reciever,
If thermoking sb210 does can I do same thing and it my help
Sir please make one Vidio about how to test generator alarm for the serveay require
Thank you sir
Sir what's the use of heat exchanger?
Hi sir I have one doubt my ship ECR remote control one problem 30 hour one bridge panel fail alarm coming, I am acc the alarm that time alarm is going ,Agin this alarm is come, last two day this alarm is come, how to find out sir please tell me
Air ano kaya problem ng meat room
May icing na rin & -3 na lng ang temp
Sir what is hardest part of being a seafarer?
sir leakyjake anong cause ng continuous running of providion reef hindi sya nah auto stop
After long time sir
Just arrived in the port today
Can we clean evaporator with hot gun?
Lodz pwede ba humingi nga advice?
Sa marine refrigeration na may 404a na gas. Ang freezer o evaporator ay walang fan modified na chest type freezer na may special liquid sa loob. Ano ba ang magandang karga para mabilis ma reach ang -20°C ng cabinet? Sa karaga kasi na 8psig kaya naman kaso ubod ng tagal bago ma reach ang -20°C aabutin ng 16 hours pwede bang abutin lang ng 4 hours? TXV ang gamit.
Dear Jake, Icing on evaporator ,so you reduced the super heat by turning it into counter clock wise. Actually here, superheat was "increased". I believe it's done after turning the adjustment screw to "clock wise ."
Are u eto
Superheat is reduced by turning anticlockwise.
Sir saan mo po nabili magnet tool mo 3:45
hi sir can you share me details of dryer core filter of this system thanks