Boxing In A Fuse Box

Поділитися
Вставка
  • Опубліковано 15 січ 2025

КОМЕНТАРІ • 66

  • @Badgerworkshop
    @Badgerworkshop  2 роки тому +1

    Tools I use
    www.badgerworkshop.com/toolsiuse

  • @freakeystyley34
    @freakeystyley34 2 роки тому +6

    These are definitely tricky jobs! If I was doing anything differently I might use the push to open type latches instead of handles, and I might have been tempted to get the carcass up then scribe a panel to overlay and meet the walls so I could get a neat finish, but for a quick fix I think you did a great job!

  • @markdyballuk
    @markdyballuk 2 місяці тому

    smashing job Matt, your mum is very fortunate, i'm sure it works both ways...

  • @keefykeef
    @keefykeef 2 роки тому +3

    Great job Matt 👍 stud finder joke never gets old

  • @10MinuteWorkshop
    @10MinuteWorkshop 2 роки тому +4

    Cheers Matt! That's the perfect illustration of just how fiddly these type of jobs are - especially in older houses where nothing is straight, plumb or true! I did a fair few of these back in the day, and I don't think I ever made money on any of them! 🤷‍♂ 👍

    • @Badgerworkshop
      @Badgerworkshop  2 роки тому +1

      Bet your glad you don’t have to do that any more

  • @awantamta
    @awantamta 2 роки тому +1

    A proper woodworking job because it solved a problem. Nice one.

  • @bobartex1812
    @bobartex1812 2 роки тому +1

    Very neat. I think most houses are built with wonky spirit levels! 😃

  • @Kidglove57
    @Kidglove57 2 роки тому +2

    Fascinated to watch this having just completed my own similar project. I learned some new possible approaches from you, so thank you! I needed to minimise the framing to allow access to the wiring - long story short, as part of this I used overlay doors. Because the overlay hinges are not adjustable (and I had to use double doors because of the width ) I ended up with the doors being marginally out of level with each other. But it seems that I am the only one who has noticed!

  • @johnrutherford4042
    @johnrutherford4042 4 місяці тому

    Excellent work well done

  • @JaceTLittle
    @JaceTLittle 2 роки тому +1

    Well done. I thoroughly enjoy the soccer/football goal in the backyard. Doesnt happen in the states.
    Also, i just recently hung a shelf thing for my mother too. Hers was all ready made but similar. Family first.

  • @henley1100
    @henley1100 2 роки тому +1

    Gidday Matt. Fingers crossed that your Dad gets well again soon. Please cheer up about the green hue in the workshop. I still enjoy the work you offer from there. All good, mate.

  • @jscook54
    @jscook54 2 роки тому +1

    Stud finder! haha. What a huge improvement to the look of that area. You are a good son.

  • @Adrian-qr9mu
    @Adrian-qr9mu 6 місяців тому

    Hi Matt. Thanks for this video. I'm doing something similar in my daughter's Reno in a couple of weeks. Although hers won't be as much an intricate design as your mum's, just a basic rectangle design I'll save this vid and work off it. Way cheaper than having the electric company move the whole thing to an outside cabinet . Thanks again

  • @paulmatthews5470
    @paulmatthews5470 2 роки тому

    Recently worked in a house with a boxed in consumer unit and homeowner wasn’t best pleased when I said it needed to come out. So tight the lid wouldn’t come off and had even been filled around. The CU itself even had newspaper stuffed in the top!

  • @benjaqsonworkshop9974
    @benjaqsonworkshop9974 2 роки тому

    Great job, I think you could say you've found another 'comfort zone' with this build.

  • @puddinggeek4623
    @puddinggeek4623 2 роки тому +1

    A fantastic video as always. I am taking on a similar project to this myself and this has given me some good ideas. Keep up the good work.

  • @MCsCreations
    @MCsCreations 2 роки тому +1

    Really nice work, Matt! 😃
    It really looks great there! Much better now!
    Stay safe there with your family! 🖖😊

  • @David.M.
    @David.M. 2 роки тому

    That was a tricky job. Old houses often are not square and require extra thought to make it fit. Good job.

    • @Badgerworkshop
      @Badgerworkshop  2 роки тому +1

      Thank you. Yes in this house there are curved walls

  • @lesthiele4921
    @lesthiele4921 2 роки тому

    Hi Matt, that wax a grezt job you done for your mother, it just shows that you ard a good son, I hope she made you lunch and supplied you with cups of tea, all the very bedt for Christmas and a safe and Happy New Year, best regards from a Kiwi living in Australia.

  • @michaelplays2449
    @michaelplays2449 2 роки тому

    nice job !!!

  • @1x3dil
    @1x3dil 2 роки тому +1

    The dis board may need work on it or changing completely , is there room to accommodate this in future . A retired electrical contractor , kind regards

    • @detroutspinners9933
      @detroutspinners9933 2 роки тому

      I’m a sparky and it’s the first thing I thought as well. I guess if push comes to shove the whole thing can just be taken down easily enough

  • @thomasmcglynn5353
    @thomasmcglynn5353 2 роки тому

    Lovely job

  • @hardlines5472
    @hardlines5472 2 роки тому

    Nice one. Had same problems in my house!

  • @Quaker521
    @Quaker521 2 роки тому

    Oh, for square walls and ceilings! Nice solution to a tricky (ish) build.

  • @simonr6793
    @simonr6793 2 роки тому +1

    Mum's and their son's it one of those time honoured traditions like an unwritten law, if mum wants something doing instead of asking husband to do it they alway's ask their son. I spent many years doing jobs around my parents house mainly because my dad was just totally useless at D.I.Y. this didn't stop until after my father passed away and if I'm being honest it only stopped because after my dad passed myself and my wife packed up all my mums belongings and made her move into our home to live with us. Great to see Matt that no job is too big or too small when it comes down to helping your mum and the finished product looks like they were there from the beginning, 💯% 👍.

  • @inflamable1977
    @inflamable1977 2 роки тому +1

    A nice job Matthew. I've a similar job to do at my Mam s house which I have been putting off. You've shamed me into starting it. It's nice to see you near your family again after your exile period up here in Durham.
    I listened to workshop banter this morning and have to say the vids in the tent /workshop look fine. Best wishes and i hope your dad is feeling better.
    Well done !👍

  • @paulcresswell1690
    @paulcresswell1690 2 роки тому

    That little jig used with the bradawl to mark where the hinge goes, where from please. Cheers.

  • @MrBez007
    @MrBez007 2 роки тому

    My stud detector must be from the same batch as yours as mine didn't work either. When I queried it the girl at the shop just said "looks like its working fine to me" ?

  • @rianmc4760
    @rianmc4760 2 роки тому

    The stud finder joke got me good lol

  • @planespeaking
    @planespeaking 2 роки тому +1

    This was good. One improvement that could be made was to leave the right hand panel over long at the top which you could have them scribed to the ceiling for a gapless finish. My woodworking is of a similar level to yourself but I am always striving to improve like you.

    • @Badgerworkshop
      @Badgerworkshop  2 роки тому +1

      Yes I thought that too afterwards. I could always go back and add a strip

    • @planespeaking
      @planespeaking 2 роки тому

      @@erictheviking672 Once you get the hang of scribing, it really does make a difference. Caulk would crack in a gap that large. Better just to leave it, not the end of the world.

  • @charleydavidson69
    @charleydavidson69 2 роки тому

    Hi Matt. Really enjoying your short videos. Need new batteries in the stud Finder!!

    • @Badgerworkshop
      @Badgerworkshop  2 роки тому

      Thank you Kim. Yes I will get some new batteries

  • @colinprince1633
    @colinprince1633 2 роки тому

    8:15 just need to get those pipe’s boxed in now.

  • @rodgerq
    @rodgerq 2 роки тому

    Good wee job to do but definitely not as simple as it looks. It would look nice with a scaffold board shelf underneath the electric board side to balance the whole thing out. I did my parents as well and it was a nightmare with all the cable entries and conduit, walls all out of square and plumb. Took me a couple of days going back and forth.

  • @Billy_Bull_Sheeter
    @Billy_Bull_Sheeter 3 місяці тому

    Do you have to use special MDF screws and did you pilot drill before screwing. Because I've used screws into the edge of MDF and over time they get loose and eventually fall out.

  • @brianpatmore8418
    @brianpatmore8418 2 роки тому

    Hi Matt, Nice job mate. Mum will be pleased. Watch out for all those up coming home cooked meals though. I could see a possible diet coming up in the future ! Onya mate !!

  • @dougsaunders8109
    @dougsaunders8109 2 роки тому +1

    Every time I look at fuse board boxing in I think how I would do it differently now. It bugs me 😂.
    Yours turned out well. One small thing I would have scribed the end panel to the ceiling. But easy from the arm chair when watching other people

    • @Badgerworkshop
      @Badgerworkshop  2 роки тому +2

      There is lots I would to differently but it’s an improvement on what was there before

    • @dougsaunders8109
      @dougsaunders8109 2 роки тому

      @@Badgerworkshop the consolation of mine

  • @negotiableaffections
    @negotiableaffections 2 роки тому

    You did great, Matt. Never doubted you, though it was a bit of a tongue twister construction. And no pin-prick holes from the forstner bit on the front of the doors - [I've been there AND cursed about it!]

  • @bigpete4227
    @bigpete4227 2 роки тому +1

    I have this exact job to do on my house. I’ve only been putting it off for 23 years. No sense in rushing these things really.

    • @Badgerworkshop
      @Badgerworkshop  2 роки тому +1

      You will get around to it one day

    • @bigpete4227
      @bigpete4227 2 роки тому

      @@Badgerworkshop I’m loving the confidence Matt.

  • @thegentlemanmaker
    @thegentlemanmaker 2 роки тому

    Timely video Matt, I’ve got to build one around our ugly *rse fuse box 😀. Thanks for sharing.

  • @karlstevens7062
    @karlstevens7062 2 роки тому

    Can you still open that consumer unit door ?

  • @homewurks1
    @homewurks1 2 роки тому

    I appreciate that it is Bosch and you have an affiliation with Bosch, but how good is the Stud Detector? I have tried a few and found them to be hit and miss. The latest one I have couldn't find the studding through half inch plasterboard

  • @jyvben1520
    @jyvben1520 2 роки тому

    Would have loved it in red or some red accents, a nice contrast, but that is subjective choice.
    Does the fuse panel still open ?

  • @michaelodonoghue7464
    @michaelodonoghue7464 Рік тому

    Whilst snapping your Tape Measure shut may appeal to your Boyish nature, doing so damages the Hook end, which over time will lead to inaccurate measurement.