I got a clock for the 1890’s and it’s chime is off it will ring at the 30 minute mark I did like your video said but it still doesn’t ring what do I do??
I have a Vintage Elgin Welby Division 350-060 Westminster Chime Mantel Clock it is striking the hour at 15 mins past the hour. after it strikes I have monved the min hand counter clockwise to the hour but it just goes on to stike the hour at 15 after on the next pass. Any suggestions as to how to fix. Thanks
Hi. Wow that Looks So easy! Hope you can help with the clock I’ve just inherited please…? My clock just doesn’t stop chiming on the hour I counted 15 or more! The hammer just keeps hitting a flat circular spiral spring in the back of the clock. . Also, as you look at the clock…do you wind the left for the chime spring and left for the clock, or the other way around? Thank you SO much
It sounds like it could need oiling or servicing. My suggestion is to wind both sides do not overtighten just enough when you feel attention. Both sides have to be wound in order to work correctly. It could be stuck. Give that a try first and then see how it goes
Hi, Bulova mantel clock strikes correct hour with hands on quarter hour. ie: hands show 8:15 chimes ring 8 times. Rings on each quarter hour. Do I repair as you did above? Would be skipping the 1/2 and 3/4 hr. chimes or allow those to chime? Seems clock would chime next hour. But then could adjust hour as shown above? If you can even understand this question, what should I do? Thank you.
You the clock man man Thanks for the info. Got a idea for future clock video's,put whatever it is above or under your video's It's hard to see what it is your doing. Just a suggestion. But your still the clock man man. From Chaparral New Mexico. Thanks for the info.
Please help...I have a Hermle mantle clock and there are no screws in the back to remove the bezel. It looks like it may be pushed straight in and held by ???. I tried prying it but scared to damage the wood on the outside. It has a brass bezel that has lines around the outside. Not sure how to remove so I can change the quartz clock movement. The replacement part I found is Dual Chime Quartz Clock Movement HM354471, 16mm. Thank you!!!
I notice you got a heart from the author but no solution! I have a similar problem. My clock strikes the half hour at a quarter past, the hour at 3/4 past! And it's several hours past the actual time.
@@pollyb.4648 yes, no solution. Watched tons of videos and in the end tried to fix it myself. I have really messed things up and the only way to fix it now is through a professional. My advice: don’t try & fix your clock yourself no matter how easy the videos make it seem to be. Always take antique clocks to a professional for repairs.
Hi. So what you're going to have to do is remove the minuite hand. There is sometimes a hand screw on the end of the stem. Remove the screw, then carefully pull the hand out. You will notice it looks like a square fitting so just place it back on at the correct angle. Hope this helps. @anitab3287
My clock hands are showing the correct time. However, the number of chimes reflects 3 hour later than the correct time. For example, at 10:00 am it chimes once. So, I can’t just move the clock hands (which are correct) to match the number of chimes (which is wrong). Ideas?
I have a Howard Miller clock.. it's off by a few chimes. So it just went 3 times and it's 11:00.I can't really move the hour hand. It moved last night when we tried it but still not right.We have watched other videos and very confusing. So if I get it to the number of chimes or strikes (whatever it's called) then how do I move it back to the real time?
Have a Waterbury antique clock that runs fine but chimes are out of sync. Hour chimes are ringing on the 1/2 hour. Hands won’t come off as there is a metal wire holding them in place. Any idea how to sync this one up? Thanks! Joe
You should be able to take off those hands use a needle, nose, pliers, and carefully remove the pin. It should be shaped like an arrow pull out the thick side of it like I caught her pin, then remove the hands carefully and adjust the clock time that should take care of the problem. Thank you for watching my video. I hope it helped.
I bought a Takeda clock and had it shipped directly to my parents in 1970 while I was in Vietnam. After they passed away. I inherited the clock. After being stored for a few years, I decided to hang it on a wall in my home, and discovered it would strike as if the time was six hours ahead of the displayed time. I'm going to try your technique, carefully winding the hour hand six hours ahead and post an update to this comment.
I only heard 3 chimes, not eight? We moved and I can’t get my clock in sync. I have it on a Westminster chime every quarter and that’s all messed up as well. The clock is running fine just the chimes are all off. 😔 Your clock is beautiful! Are you going to fix it to make it sound better? I love it.
Ihave a clock Seth Thomas Westminster Cathedral clock that was repaired but always when I wind clock the chime would be off . So with your direction ihave fixed my chime problem . Thank you . Guy montefinese
How do i know which weight goes where they were off the clock or does it make a difference 🤔my body weight scale won't register the weight of the weights
The guy is giving his mind, time and personal notes. Throw him a few 'fishes' folks! He's saved our clocks and he's cheaper than a set of used roller skates!!!
Hi. Great video. Thank you. Just found a Seth Thomas Ship's Bell c.1921, all in excellent order except that the gong is two hours ahead of the movement time... exactly two hours during the four-hour watch keeping cycle :) Would the technique you describe here work for this situation ? This clock does not have a silent mode switch
Thank you for your help. My new mechanical full height clock is now striking on the correct hour, but the Mimue hand is 4 minutes late. (Ie: it strikes the hour 4 minutes after the hour). I would sincerely appreciate your expert perspective.
Some time with these old clock that happens. it could need oil on some of the pivet points. Also make sure it is fully wound but not over wound. Give it some time. LOL
Hi, I have antique porcelain Ansonia clock. It runs great but for some reason is chiming half hour on full hours and vice versa. How do I correct it ! I would appreciate your advice
@@YourReviewChannel I have the same problem, but using the hour hand wont fix the problem. Minute hand still strikes full hours on 6 and half hour on 12. Wont touch the minute hand after Reading up on the net "DO NOT TOUCH IT".
My clock was two strikes behind the time shown. I did what you advised i.e. moving the small hand only, reset the correct time and it fixed the problem. Thank you.
I purchased a Kieninger wind up Wall Clock at a Estate Sale. The pendum doesn't continue to swing. I have no directions. Which side is the Chime? Thanks.
Hi there. I have an Amana Fredrick Hann Clock that strikes 5 minutes early. How do I get it to strike on the hour and half hour not 5 minutes early. The minute hand has a square fitting so I cannot take it off and place it back on to adjust for the 5 minutes. Thank you.
I have many mechanical clocks and love to watch to quick fix videos lol but now, my clock strikes 2 hrs behind the time...... can I move the hour hand backwards? please advise.
I have an old 1930 clock, and it has the two crank positions. My question, is it the left side for the chime? and right side for clock? can u run clock without chime?
We have a Howard Miller GrandMother clock. Some say only move hands in reverse. Our chime is way off. The clock is about 35 years old. Please let us know how to adjust chime. Thanks.
My clock stricks the hours correctly but at half hour late.. ie at 6.30 it chimes 6 times. It has three key winding ports. It chimes correctly ? Every 15 minutes, keeps good time, just the hour chime is 30 mins late... Can this be reset at home ?? Thanks Chris .. uk 🇬🇧
After syncing the chime, to get it to correct time once more, do you turn the hands clock-wise? I’m guessing counter clock-wise would loosen the hour and minute hands once more.
When you forget to wind the alarm spring, the clock WILL NOT GET OUT OF SYNC. Just wind the alarm spring and it will chime correctly. The snail, which controls the number of chimes every full hour and is connected to hour hand, has not changed position relative to the hour hand.
we watched your video good video we have a coo-koo clock chimes 10 minutes before original time..on half hour same thing 10 minutes early how do i correct that problem?
My beautiful standing clock have for 10 and half years now stop working the time going slower. . I say i would gey it fix. I put a new battery same thing. It give me many uears so i am grateful
I got a gingerbread clock and the second hand has a sqaure hole. Some reason the swaure hole doesn't add up to the correct chime time. So I basicaly put it wrong to make the time correct it's so weird.
Hi I have a Sessions click 100+ years old. The second hand came off and when I put it back in place the bonging on the hour has changed to the half hour And the ding on the half hour now happens on the hour 😮 Can’t figure out how to remedy this Please advise if you can. Gracias
Hi, I bought a Elgin 201 clock. For some reason, every time it chimes, it's 12 o'clock. It never changes it's stuck at 12 o'clock. Can you help me with that? Thank you
A friend gave the Postal Telegraph clock to me 1 day before he died unexpectedly. 5 years later it seems to be a conspiracy to not be able to find the right motor for it. If you happen to find one or find info on what I should delve into on that clock, please keep me in mind? I've bought 8 so far that just aren't quite right. My aim is to fix that clock and give it to his kid. Take care. Thanks for acknowledging me.
My wall clock Howard Miller. At any hour chimes 1 hour short. Six o'clock 5 strikes. How do I get this correct.thanks for your help. Iwill be watching.
you got the chime to match the hour on the face but you didnt explain how to match it to the time that it was as you were setting it. You got it to ring 9 times with the hand on 9 but what if you were setting the whole thing at 3 oclock in the afternoon?
Piper grandfather clock does not time in sequence eight times twice at 2 o’clock several times at 3 o’clock and one time at 4 o’clock how do I get to time in sequence?
I resync ed the hands ok and it chimes the correct time until it gets to 12- O'Clock it chimes 12 times . Perfect. Then it gets to 1 O'Clock- - It still chimes 12 times at the 1 O'Clock position ? How do I rectify that please?
Keeping the clock and strike / chime trains wound has nothing to do with this problem of striking the wrong hour. One thing has nothing to do with the other. With clocks that have both chimes and strikes both functions stop if the chime train runs down since it triggers the strike. With those clocks the wrong hour won't be struck, but rather the hour will be struck at the wrong quarter of the hour since the chime train is out of sync and it triggers the strike train. The problem with this clock was that the hour hand was in the wrong position relative to the snail which is human installation error. Rotating the hour hand from 6 to 7 moved the hour hand on the snail to where it should have been. A little theory: The snail is a cam with 12 declining steps on it. It somewhat resembles the shell of a snail. The snail is fixed solid on the hour shaft. When the strike train is started at the top of the hour the rack positioning lever is dropped onto the snail setting the chiming rack for the number of strikes for the current hour. As the clock chimes the gathering pallet turns moving the rack to closer to it's finishing position when the strikes for the hour are completed. The more hours that pass as you get closer to twelve, the lower on the snail the rack positioning lever falls causing the rack to have to travel farther. This clock doesn't have a chime train so you don't have 1/4, 1/2, 3/4, and on the hour chiming. That can get out of sync if the chime train happens to wind down but the clock keeps running. Most clocks have some form of internal chime train correction which will usually engage at the 3/4 hour mark by itself. In the case of those movements just wind it up and let it run. It will correct itself.
White I appreciate the video, my full length grandfather clock is from 1992 and looks nothing like this. Not sure why you'd use a clock from 1919 as your example as while it's nice it's not a very common fit people to own COVID from 1919. Mine uses a weight system and has zero keys.
Yo bro recently found what I figure to be a 75-year-old clock trying to figure out how to reset it it's off by 2 hours at midnight it only strikes 10 LOL I'll try to find it it's really a nice clock and I don't even like clocks. 😁🇨🇦😁
I have a school house clock and it would strike odd strikes How I fixed mine was when it struck 12 anywhere on the face I would run hour hand up to 12/ After that, it would strike the right hours afterwards.
Please help support my channel with a HEART SUPER THANKS. Thank you.
I got a clock for the 1890’s and it’s chime is off it will ring at the 30 minute mark I did like your video said but it still doesn’t ring what do I do??
@@undertakerbutthead515 Could need service. try to oil and reset the chime like I should you in the video.
@@YourReviewChannel what do I oil it with
@@undertakerbutthead515 I use clock oil, This is a link to one of them. amzn.to/3Rn9HqW
Very informative and helpful 👍
Thanks a lot. I had a sessions mantle clock that I only wound the mainspring and I didn’t realize it would get out of sync. This worked very well.
Thanks!
Thank you so much. I hope I helped you
Good video,worked well when I tried it. Thanks
Very clear instructions that completely resolved my issue. Thank you very much for your assistance.
My pleasure
Hello from Wyalkatchem. Western Australia. Thank you for video, Was able to fix chime
Thank you so much! My mantle clock is 5 hours chiming ahead. I’ll use your technique to get it back in sync. Once again , thanks!
What kind of mantle clock is 5 hours chiming ahead?
It’s an E. Graham; made probably over 100 years ago in Bristol, Tennessee. It’s a cherry. 😏
Exactly what I needed. Thanks !
Glad it helped!
Great I have a Waterbury clock. Do you give any suggestions? You are wonderful I understood everything
Thank you, yes first try to clean and oil with clock
, then wind the clock and let it run, if it won’t run correctly it could need service.
Straight forward simple to follow instructions. Thank you
Thanks
This worked! Extremely helpful. Thanks so much!
I have a Vintage Elgin Welby Division 350-060 Westminster Chime Mantel Clock it is striking the hour at 15 mins past the hour. after it strikes I have monved the min hand counter clockwise to the hour but it just goes on to stike the hour at 15 after on the next pass. Any suggestions as to how to fix. Thanks
THIS WORKED!!! THANK YOU!!!
That was easy to follow and worked just like you said. Thanks.
Thank you: as simple as described!
You're welcome!
Hi. Wow that Looks So easy!
Hope you can help with the clock I’ve just inherited please…?
My clock just doesn’t stop chiming on the hour I counted 15 or more! The hammer just keeps hitting a flat circular spiral spring in the back of the clock.
.
Also, as you look at the clock…do you wind the left for the chime spring and left for the clock, or the other way around?
Thank you SO much
It sounds like it could need oiling or servicing. My suggestion is to wind both sides do not overtighten just enough when you feel attention. Both sides have to be wound in order to work correctly. It could be stuck.
Give that a try first and then see how it goes
My Howard miller clock chimes very random amounts on a certain hour and never does the amount it’s supposed to. Any advice?
out with it lad :)
Hi, Bulova mantel clock strikes correct hour with hands on quarter hour. ie: hands show 8:15 chimes ring 8 times. Rings on each quarter hour. Do I repair as you did above? Would be skipping the 1/2 and 3/4 hr. chimes or allow those to chime? Seems clock would chime next hour. But then could adjust hour as shown above? If you can even understand this question, what should I do? Thank you.
Just adjust the hands, take of the hands and readjusting them to the correct time.
Thank you so very much. Spot on reset of the hour chime.
Thank you so much!!
It really worked.
You the clock man man
Thanks for the info.
Got a idea for future clock video's,put whatever it is above or under your video's
It's hard to see what it is your doing.
Just a suggestion.
But your still the clock man man.
From Chaparral New Mexico.
Thanks for the info.
Thank you for watching and subscribing
This worked for my Howard Miller grandfather clock. Thank you!
You are welcome
Thanks! All fixed
Glad I could help!
Beautiful !!!
Many thanks!!
Thanks so much for your help. Excellent!!
Solved my issue, and the instruction was even easy for me to follow, thanks.
My clock chimes the hour at 1/4 past the hour , how can I correct this ?.
Going to try this later today , hope it works
Very good. Thank you.
Thank you too!
The first couple times I tried this it failed. I then realized I had to stop the clock prior to adjusting. Voila! Perfect! Thank you.
Glad it helped!
Please help...I have a Hermle mantle clock and there are no screws in the back to remove the bezel. It looks like it may be pushed straight in and held by ???. I tried prying it but scared to damage the wood on the outside. It has a brass bezel that has lines around the outside. Not sure how to remove so I can change the quartz clock movement. The replacement part I found is Dual Chime Quartz Clock Movement HM354471, 16mm. Thank you!!!
Yes, it’s hard to tell by your description just take your time. Most likely you have to take it apart from the front.
Thank you for your help.
You're welcome!
I agree how do you correct if it is 6 o’clock and rings 7 times
tu doit tourner le grand eguille pour tout les heures jusqu'au 12oclock
What if the minute hand is out of sync? It chimes on 10 minutes past the hour?
I notice you got a heart from the author but no solution! I have a similar problem. My clock strikes the half hour at a quarter past, the hour at 3/4 past! And it's several hours past the actual time.
@@pollyb.4648 yes, no solution. Watched tons of videos and in the end tried to fix it myself. I have really messed things up and the only way to fix it now is through a professional. My advice: don’t try & fix your clock yourself no matter how easy the videos make it seem to be. Always take antique clocks to a professional for repairs.
I’ve got a similar problem with a clock I just bought. It chimes the hours at 30 minutes past and vice versa
Hi.
So what you're going to have to do is remove the minuite hand.
There is sometimes a hand screw on the end of the stem. Remove the screw, then carefully pull the hand out. You will notice it looks like a square fitting so just place it back on at the correct angle.
Hope this helps.
@anitab3287
@@scorchinbrandon1864 Thank you for replying. The hands are held on with a pin rather than a screw. I don’t feel up to tackling this just yet… 🙏
My clock hands are showing the correct time. However, the number of chimes reflects 3 hour later than the correct time. For example, at 10:00 am it chimes once. So, I can’t just move the clock hands (which are correct) to match the number of chimes (which is wrong). Ideas?
I have a Howard Miller clock.. it's off by a few chimes. So it just went 3 times and it's 11:00.I can't really move the hour hand. It moved last night when we tried it but still not right.We have watched other videos and very confusing. So if I get it to the number of chimes or strikes (whatever it's called) then how do I move it back to the real time?
It's Possible that it may need service.
Have a Waterbury antique clock that runs fine but chimes are out of sync. Hour chimes are ringing on the 1/2 hour. Hands won’t come off as there is a metal wire holding them in place. Any idea how to sync this one up? Thanks! Joe
You should be able to take off those hands use a needle, nose, pliers, and carefully remove the pin. It should be shaped like an arrow pull out the thick side of it like I caught her pin, then remove the hands carefully and adjust the clock time that should take care of the problem. Thank you for watching my video. I hope it helped.
I bought a Takeda clock and had it shipped directly to my parents in 1970 while I was in Vietnam. After they passed away. I inherited the clock. After being stored for a few years, I decided to hang it on a wall in my home, and discovered it would strike as if the time was six hours ahead of the displayed time. I'm going to try your technique, carefully winding the hour hand six hours ahead and post an update to this comment.
I only heard 3 chimes, not eight? We moved and I can’t get my clock in sync. I have it on a Westminster chime every quarter and that’s all messed up as well. The clock is running fine just the chimes are all off. 😔 Your clock is beautiful! Are you going to fix it to make it sound better? I love it.
Yes I will. Thanks for watching
Ihave a clock Seth Thomas Westminster Cathedral clock that was repaired but always when I wind clock the chime would be off . So with your direction ihave fixed my chime problem . Thank you . Guy montefinese
How do i know which weight goes where they were off the clock or does it make a difference 🤔my body weight scale won't register the weight of the weights
The guy is giving his mind, time and personal notes. Throw him a few 'fishes' folks! He's saved our clocks and he's cheaper than a set of used roller skates!!!
Thank you
Great video, We have a grandfather clock that will only strike one time any ideas?
Sounds like it needs to be serviced and oiled
Reset you're striking hammer so that it sounds right when it hits the gong.
@@dazzfromaus4797 comment pour reinitialiser les sonneries?
Hi. Great video. Thank you.
Just found a Seth Thomas Ship's Bell c.1921, all in excellent order except that the gong is two hours ahead of the movement time... exactly two hours during the four-hour watch keeping cycle :)
Would the technique you describe here work for this situation ?
This clock does not have a silent mode switch
Yes it should
Thank you for your help. My new mechanical full height clock is now striking on the correct hour, but the Mimue hand is 4 minutes late. (Ie: it strikes the hour 4 minutes after the hour). I would sincerely appreciate your expert perspective.
Some time with these old clock that happens. it could need oil on some of the pivet points. Also make sure it is fully wound but not over wound. Give it some time. LOL
Hi, I have antique porcelain Ansonia clock. It runs great but for some reason is chiming half hour on full hours and vice versa. How do I correct it ! I would appreciate your advice
Take of the hour hand and switch it to the correct time
@@YourReviewChannel
I have the same problem, but using the hour hand wont fix the problem. Minute hand still strikes full hours on 6 and half hour on 12.
Wont touch the minute hand after Reading up on the net "DO NOT TOUCH IT".
My Smiths Westminister mantle clock chimes at quarter to the hour,, how do I adjust,?
well done easy fix
My clock was two strikes behind the time shown. I did what you advised i.e. moving the small hand only, reset the correct time and it fixed the problem. Thank you.
Hi I have a grandmother clock and I am having a problem setting it can you give me some tips
I purchased a Kieninger wind up Wall Clock at a Estate Sale. The pendum doesn't continue to swing. I have no directions. Which side is the Chime? Thanks.
Move the clock hands clock wise and it should chime. Most of the time the right side is the clock side
@@YourReviewChannel which way do you turn the keyLeft or Right ?
Hi there. I have an Amana Fredrick Hann Clock that strikes 5 minutes early. How do I get it to strike on the hour and half hour not 5 minutes early. The minute hand has a square fitting so I cannot take it off and place it back on to adjust for the 5 minutes. Thank you.
It might need to be serviced and oiled
Thanks! It worked!
I have many mechanical clocks and love to watch to quick fix videos lol but now, my clock strikes 2 hrs behind the time...... can I move the hour hand backwards? please advise.
You need to remove the hands to set them
is it ok to move the hour hand backwards? Thanks (my clock is striking 5 at 9)
No do not move it backwards. Just remove the hand like a show you in the video
@@YourReviewChannel Worked out great. Thanks.
I have an old 1930 clock, and it has the two crank positions. My question, is it the left side for the chime? and right side for clock? can u run clock without chime?
Yes you can
This was very helpful - thank you.
My question: I’ve lowered the pendulum disc as much as I can, but the clock still runs fast. How do I fix this?
It’s possible that the pendulum is not the correct size?
We have a Howard Miller GrandMother clock. Some say only move hands in reverse. Our chime is way off. The clock is about 35 years old. Please let us know how to adjust chime. Thanks.
Never move them in reverse. you can ruin the gears. Take of the hands and move them to the correct position.
Thank you very much!
You are welcome
12:38 does this apply to cuckoo clocks? You are amazing. Thank you so much
clocks. You are amazing
Yes
Hello I have a westminister chime mantel that chimes but doesn't strike the hour can you please help me?
Did you watch the video, it could help you
Hi I have a Seth Thomas clock the chime is ahead by 5 hrs so I move the hour hand by 5 hrs.
But hope it does not damge the hour gear or shaft
You take off the Hour Handle and move it over
Thank u. U rock
My clock stricks the hours correctly but at half hour late.. ie at 6.30 it chimes 6 times.
It has three key winding ports.
It chimes correctly ? Every 15 minutes, keeps good time, just the hour chime is 30 mins late...
Can this be reset at home ??
Thanks Chris .. uk 🇬🇧
I’m not sure sounds like it needs service
Thank you for watching my videos, Please 🔴 Subscribe 🔴for more videos. Thank you. ua-cam.com/users/YourReviewChannel
After syncing the chime, to get it to correct time once more, do you turn the hands clock-wise? I’m guessing counter clock-wise would loosen the hour and minute hands once more.
Yes clockwise
Thanks for your time ⌚, have this to do to my clock I know very little about
You are welcome. Please don’t forget to subscribe for more videos.
My grandfather clock does not chime after I set the fall back time
How to make it chime again.
How can I make my grandfather clock chime again?
When you forget to wind the alarm spring, the clock WILL NOT GET OUT OF SYNC. Just wind the alarm spring and it will chime correctly. The snail, which controls the number of chimes every full hour and is connected to hour hand, has not changed position relative to the hour hand.
Thanks you
My longcase clock is sometimes not counting enough times occasionally short by one chime. Only happens for 2 to 8 o’clock.
Please advise
Sounds like it could need service. It could be gummed up and not keeping track of the strikes.
@@YourReviewChannel thanks for that reply but that doesn’t explain predictable always one strike short on 2,3,4,5,6,7 o’clock does it?
we watched your video good video we have a coo-koo clock chimes 10 minutes before original time..on half hour same thing 10 minutes early how do i correct that problem?
Tried to takeoff the hands that adjust the time
Thanks ,,,,
You're welcome!
My beautiful standing clock have for 10 and half years now stop working the time going slower. . I say i would gey it fix. I put a new battery same thing. It give me many uears so i am grateful
I got a gingerbread clock and the second hand has a sqaure hole. Some reason the swaure hole doesn't add up to the correct chime time. So I basicaly put it wrong to make the time correct it's so weird.
Any idea why my mantle clock chimes stopped chiming?? Thanks
I’m not really sure what I’m looking at it, but could be a good cleaning, and possibly oiled
I have a Waterbury clock and it strikes on the quarter hour instead of the top of the hour. How do I get it back in sync?
Try winding both sides it could self correct over the next 24 hours
I just got the same clock but at 730 pm it chimed 10 times. It's stopped now. Will it reset it if I put it on 1200 n wind it?
Hi I have a Sessions click 100+ years old. The second hand came off and when I put it back in place the bonging on the hour has changed to the half hour And the ding on the half hour now happens on the hour 😮 Can’t figure out how to remedy this Please advise if you can. Gracias
When you hear the bongs pull off the hands and move it to the correct time and then put them back on that should solve your problem
Hi, I bought a Elgin 201 clock. For some reason, every time it chimes, it's 12 o'clock. It never changes it's stuck at 12 o'clock. Can you help me with that? Thank you
Needs to be serviced and oiled .
Any chance you have a clock motor for a Postal Telegraph synchronous electric time clock you'd sell me???
Sorry I do not. Thank you for watching my video.
You're very knowledgeable. Thanks again for your help on my dear Howard Miller clock!
A friend gave the Postal Telegraph clock to me 1 day before he died unexpectedly. 5 years later it seems to be a conspiracy to not be able to find the right motor for it. If you happen to find one or find info on what I should delve into on that clock, please keep me in mind? I've bought 8 so far that just aren't quite right. My aim is to fix that clock and give it to his kid. Take care. Thanks for acknowledging me.
I have a seth thomas mantel clock. It chimes the time on 6 and half hour on 12 how do I correct this?
Move the hands
My wall clock Howard Miller. At any hour chimes 1 hour short. Six o'clock 5 strikes. How do I get this correct.thanks for your help. Iwill be watching.
Sounds like it might need some service. You can try to oil the pivot points that could help.
How do you do it if it is chimming 4 min late then the hr and half hr
Thank you
How do I take the washer of the hour hand
small needle-nose pliers
My wall clock was working great. Noticed that it was chiming the hour on the half and the half on the hour. Any suggestions to correct.
Just move the hands like I show you in the video to correct the time
you got the chime to match the hour on the face but you didnt explain how to match it to the time that it was as you were setting it. You got it to ring 9 times with the hand on 9 but what if you were setting the whole thing at 3 oclock in the afternoon?
All you have to do is keep moving the hands clockwise slowly until your reach the desired time.
Piper grandfather clock does not time in sequence eight times twice at 2 o’clock several times at 3 o’clock and one time at 4 o’clock how do I get to time in sequence?
Thank you very helpful and simple tip to adjust the hour strikes. Much appreciated.
You're welcome!
I resync ed the hands ok and it chimes the correct time until it gets to 12- O'Clock it chimes 12 times . Perfect. Then it gets to 1 O'Clock- - It still chimes 12 times at the 1 O'Clock position ? How do I rectify that please?
it might need Service
How to adjust chimes that are off by 15 minutes? 12 oclock chimes at 12:15
Move hands to adjust time. Remove the hands to make the adjustment
Keeping the clock and strike / chime trains wound has nothing to do with this problem of striking the wrong hour. One thing has nothing to do with the other. With clocks that have both chimes and strikes both functions stop if the chime train runs down since it triggers the strike. With those clocks the wrong hour won't be struck, but rather the hour will be struck at the wrong quarter of the hour since the chime train is out of sync and it triggers the strike train.
The problem with this clock was that the hour hand was in the wrong position relative to the snail which is human installation error. Rotating the hour hand from 6 to 7 moved the hour hand on the snail to where it should have been.
A little theory: The snail is a cam with 12 declining steps on it. It somewhat resembles the shell of a snail. The snail is fixed solid on the hour shaft. When the strike train is started at the top of the hour the rack positioning lever is dropped onto the snail setting the chiming rack for the number of strikes for the current hour. As the clock chimes the gathering pallet turns moving the rack to closer to it's finishing position when the strikes for the hour are completed. The more hours that pass as you get closer to twelve, the lower on the snail the rack positioning lever falls causing the rack to have to travel farther.
This clock doesn't have a chime train so you don't have 1/4, 1/2, 3/4, and on the hour chiming. That can get out of sync if the chime train happens to wind down but the clock keeps running. Most clocks have some form of internal chime train correction which will usually engage at the 3/4 hour mark by itself. In the case of those movements just wind it up and let it run. It will correct itself.
Makes me think of a tv show..
What battery operated mantel clock...keeps chiming 20+ times no matter what hour
I have no idea that it’s crazy
White I appreciate the video, my full length grandfather clock is from 1992 and looks nothing like this. Not sure why you'd use a clock from 1919 as your example as while it's nice it's not a very common fit people to own COVID from 1919. Mine uses a weight system and has zero keys.
Thank you for your comment. But the process could be the same just move the hand in the proper position and reset the chime to the right time.
My clock isn't chiming. Haven't won't it in a while, but it was working last time I had it running. Why won't it chime or what can I do?
I’m not sure it might have to be serviced or oiled
My pendulum clock chimes the hour and half hour the same time. How to fix?
It sounds like I might need service
Yo bro recently found what I figure to be a 75-year-old clock trying to figure out how to reset it it's off by 2 hours at midnight it only strikes 10 LOL I'll try to find it it's really a nice clock and I don't even like clocks. 😁🇨🇦😁
Our 2 way Grandfathers clock is chiming correctly on the hour, but is no longer chiming at the 1/2 hour. Any suggestions on how to correct this?
Could need a cleaning and oil
I have a school house clock and it would strike odd strikes How I fixed mine was when it struck 12 anywhere on the face I would run hour hand up to 12/ After that, it would strike the right hours afterwards.
Thanks making video my clock problem is After some days pendulum clock running slow time is not correct and they stop.
Could need some oiling and also a cleaning.
@@YourReviewChannel thanks