' one of these days i want to build something that stays nice , seems like everything i have is in a constant state of repair ' ... Dave again proves he is one of the most relatable you-tubers
The new Interior looks SUPER RAD!!!! and glad to see that bumper up close, absolutely love it looks so sick! It's super cool to have inherited the stock bumper into the truck!
Nice job Dave, great stuff. Last summer I fabricated a seat bracket because I didn't want to pay the $200+ Corbeau wanted. Spend a couple days measuring, drawing plans, sourcing materials. Then on Sunday I got to it. After about two and a half hours of driveway fab, I had the frame about 15% done. I went inside and ordered the stupid thing. 🤣
Glad to know I'm not the only one using the Van Sickle for some car mod touch up 😂 Boy that friend of yours... And seat heaters would be money in the trail
Freiburger casually strolling around like he's NOT a big fucking deal! Dave please try to convince that legend Freiburger to go wheeling w/ y'all & film it. Better yet get him to go on UA! Reignite his love of wheeling!
For as much as you use your stuff in extreme off road use, nothing is ever going to be perfect. But look at the difference in mom’s spaghetti in just a couple days. Bucket, HEATED seats???? I wasn’t sure about the southwestern seats…but by the end of the episode, i saw how perfect they were. Well done!
That seat frame is killer, tying in with the stock seat/seatbelt mounts is super cool . I’m definitely banking that method 👍🏻. Loving the channel Dave 🤟🏻
I had a tuffy console that was busted into and ended up using a large ammo can in its place. Worked great and had much more space, I added tabs for pad locks on the latches. The pad from the tuffy made the box a lot nicer.
FANTASTIC JOB DAVE 👏👏👏 That REALLY looks good with TOP NOTCH FABBIN’ to BOOT!🥾 Looking forward to THE BIG WHEELER CONTENT 🤩🤩🤩 These past few Videos have been some of my FAVE💪💪💪 🍝
"Everything I have is in a constant state of repair." I chuckled at that because it seems to be a common characteristic for the most viewed mechanical channels on UA-cam.
Very timely. I need to do a mount for bucket racing seats in my C10. Your fab skills are amazing. When I want to fill my head with good project ideas, I watch your fab work.
Dave just an idea but with the seats & steering wheel You need to do a lowrider flake- pinstriped paint job. Not a crazy 200 hr. all out one but a less involved big panel wild color flake. Just My thoughts. 😎👍👍
I love, “my buddy”…. Yeah, just happens to be David Freiburger… future roadkill episode maybe…. lol. Love your builds.. thanks for putting out the videos!!
We all say that Dave, "One day I will build something that stays nice" next trip out. Well I need to replace the fender and hood, and I thought it would be fun to blow up the front axle...hahaha If you not breaking something on a trip, you're not experiencing the trip.
I love the PRP seat material and seats you chose for Moms Spaghetti Dave . Those Baja Designs lights are no joke . I'm looking into the new lights that look like a Baja Designs lights from Harbor Freight . I can't afford the Baja Design lights. Have fun in Moab for EJS , I cant make it this year . Take care Dave and catch you on your next video.
My favorite UA-cam channel! I am always amazed by how simple you can make things! I love the new interior in your truck. The pattern on the seats is perfect
Props on your video quality. You’ve come a long way fast. If you ever need to get rid of any takeoff gear you can send it over. I have a $0.00 budget buggy I’m trying to get done. Keep the faith, stock Sucks!
You say constant state of repair but I hear continous improvements. Sweden says hi! A good saturday morning today with some coffe and DirtHead Shed building stuff. Love it.
The amount of times I have had those PRP seats in that fabric sitting in my cart on the website over the last 6 months is crazy. Can't bring myself to pull the trigger on them cause I don't know if they'll be too much. But damn they look good.
Nice job Dave. I must be a weirdo. Every time I see one of these seat installs I wonder why they don't make them adjustable. I would always want me seat to slide front and back for when the pedals move around on me 😀
Hey Dave, give that Krylon tractor paint a try. I refinished the mower deck and rear body section on my John deere 4 years ago, and it hasn't corroded yet. It is stored outside and does plow duty in the winter.
I installed 2003 chevy buckets in an 89, using cut off pieces of the old bench seat floor mount, welded to square tubing made from angle iron and drilled to bolt to the seat sliders with grade 8 nuts and bolts.
Those RT's look great. I was an MT guy but I recently went with a hybrid tire (BBATs) and love them. So much nicer onroad while still being pretty aggressive for offroad. Love the new seats, too!
Lovin the rig! Last video I suggested flat black for the truck but with the new seats and the color of the wheels I would do satin navy blue. Would go with the wheels, the brown trim on the seats and the killer design. You have done an awesome job on this!!
I had same issues of no storage in cab of my truggy so I got my PRP seats with the front goggle pouches and I bought a PRP matching utv center storage bag I hung under the sliding window. Works awesome
' one of these days i want to build something that stays nice , seems like everything i have is in a constant state of repair ' ... Dave again proves he is one of the most relatable you-tubers
I felt this. It hurt how accurate it was 😂
that "40 year old loser" line hit me right in the feels
Wait until You're 50+.. Big Oooff.
David Freiburger is more then a friend. Lets be honest. You both are car guy royalty!!
Aww…. Thanks
Your buddy! That's David Freiburger! Y'all all work good together! Can't wait to see that too. 👍👍👍
I’ll have a little cameo on one of his new videos
@@thedirtheadshedLove all the cofabs
I saw the flip flops and instantly knew lol
Using the square tubing for the front subframe mount was genius. I like the way you think about & solve problems.
Thanks! It definitely made things go faster
Those seats matched with the gold flake wheel is money.
Made the truck way more fun
Looks like Freiburger found a sick clean wagon!!
Moms spaghetti is one of my top 5 4wd builds on youtube
The inside of mom’s spaghetti looks like a party…so rad 👍🏻👍🏻
It’s way more fun now
Epic Flip Flop cameo by David Frieburger...must have been going over that Torino wagon!
I've never been much of a Ford guy, but I'm diggin this rig.
By far… this is my favorite build that you’ve ever done.
Love watching your stuff man, makes me motivated to work on my junk when I get home.
Thanks! Hope you got a little done this weekend
The new Interior looks SUPER RAD!!!! and glad to see that bumper up close, absolutely love it looks so sick! It's super cool to have inherited the stock bumper into the truck!
It turned out cool. Not the most durable thing. But it’s fun
Man you just keep making my favorite truck better and better. One day I want a driver just like mom’s spaghetti. ❤
Dave eats spaghetti with mustard. I love it dude. It’s rad!
Nice job Dave, great stuff. Last summer I fabricated a seat bracket because I didn't want to pay the $200+ Corbeau wanted. Spend a couple days measuring, drawing plans, sourcing materials. Then on Sunday I got to it. After about two and a half hours of driveway fab, I had the frame about 15% done. I went inside and ordered the stupid thing. 🤣
Hahaha.. you’ll get that on those big jobs
Absolutely love this truck and the work you're doing. Those seats are awesome and the mount is a great solution.
“Friend of mine” none other than Freiburger.
Stopped in on an adventure
Those seats are awesome.. love the style, bright colors. Customizing your own stuff is always so fun...
It’s like a party in there
That is some clean fabrication on the seat frame...it looks awesome!
Thanks!
Glad to know I'm not the only one using the Van Sickle for some car mod touch up 😂
Boy that friend of yours...
And seat heaters would be money in the trail
Dave is one of the guys who helps me make my junk suck less. Thanks, Dave! You don't suck!
Looking forward to the next episode! Love a good road trip.
Freiburger casually strolling around like he's NOT a big fucking deal! Dave please try to convince that legend Freiburger to go wheeling w/ y'all & film it. Better yet get him to go on UA! Reignite his love of wheeling!
@Macks_Effort
Really.. wow. I've been watching them in all the original shows from the UA-cam days but I didn't know that.
By the looks of it, you managed to colour coordinate the steering wheel and rims Dave. Looks awesome.
It’s all coming together
Man those seats are cool, and totally fit the style of the truck 🤘🏻
I agree!
Nice, Freiburger sighting!
That console box looks great, back in the 80’s I made one for my CJ5 that was dam near the same design.
A classic look.
Road trip in Mom’s Spaghetti sounds awesome
It’s working out!
Now I want those seats, cause you Dave. Have fun.
My job is done
Those seats would look amazing in my rio grande yj with it's spice brown interior.
Oh yeah
For as much as you use your stuff in extreme off road use, nothing is ever going to be perfect. But look at the difference in mom’s spaghetti in just a couple days. Bucket, HEATED seats???? I wasn’t sure about the southwestern seats…but by the end of the episode, i saw how perfect they were. Well done!
Thanks! Yeah. Little bites and eventually it’ll be good to go
That seat frame is killer, tying in with the stock seat/seatbelt mounts is super cool . I’m definitely banking that method 👍🏻. Loving the channel Dave 🤟🏻
Thanks! Yeah it came out pretty simple and clean
I had a tuffy console that was busted into and ended up using a large ammo can in its place. Worked great and had much more space, I added tabs for pad locks on the latches. The pad from the tuffy made the box a lot nicer.
FANTASTIC JOB DAVE 👏👏👏 That REALLY looks good with TOP NOTCH FABBIN’ to BOOT!🥾 Looking forward to THE BIG WHEELER CONTENT 🤩🤩🤩 These past few Videos have been some of my FAVE💪💪💪 🍝
The front bumper is my favorite part of the truck!
Absolutely…. Without a doubt ….100% my favorite ride of yours.
The seats are cool. Great job 👍👍
Thank you
"Everything I have is in a constant state of repair." I chuckled at that because it seems to be a common characteristic for the most viewed mechanical channels on UA-cam.
Coolest seats ever. Gotta get some for myself!
Those seats are SICK! They tie in with the 'flake steering wheel You just put in and give the whole truck this very groovy look.
Very timely. I need to do a mount for bucket racing seats in my C10. Your fab skills are amazing. When I want to fill my head with good project ideas, I watch your fab work.
Turning into a heck of a truck. I see we got another so,
It’s a good one. They all just need some attention now and then
I was pumped when you shot that wheel color. Then the steering wheel, then the seats and lights! So good.
I’m a sucker for an old wagon too.
Dave just an idea but with the seats & steering wheel You need to do a lowrider flake- pinstriped paint job. Not a crazy 200 hr. all out one but a less involved big panel wild color flake. Just My thoughts. 😎👍👍
I love, “my buddy”…. Yeah, just happens to be David Freiburger… future roadkill episode maybe…. lol. Love your builds.. thanks for putting out the videos!!
We all say that Dave, "One day I will build something that stays nice" next trip out. Well I need to replace the fender and hood, and I thought it would be fun to blow up the front axle...hahaha If you not breaking something on a trip, you're not experiencing the trip.
Yeah. It’s kinda got to be that way
Great work brightened up interior 🎉
Made it fun to drive again
The seats and mount turned out great. Those wheel look fantastic, especially with the amber lights.
Thanks. I think it’s coming together pretty well too
I love the PRP seat material and seats you chose for Moms Spaghetti Dave . Those Baja Designs lights are no joke . I'm looking into the new lights that look like a Baja Designs lights from Harbor Freight . I can't afford the Baja Design lights. Have fun in Moab for EJS , I cant make it this year . Take care Dave and catch you on your next video.
I’m curious how good the HF ones are
@@thedirtheadshed I only have seen videos on how bright they are . Not sure of the longevity of them though.
The truck is lookin great!!! 👏🏻
Thanks! It’s fun to keep making changes
My favorite UA-cam channel! I am always amazed by how simple you can make things! I love the new interior in your truck. The pattern on the seats is perfect
Those seats look amazing. And your stuff may be in a constant state of repair but that's because you use it. 🤙
That truck is looking so cool!
Thanks!
Props on your video quality. You’ve come a long way fast. If you ever need to get rid of any takeoff gear you can send it over. I have a $0.00 budget buggy I’m trying to get done. Keep the faith, stock Sucks!
Oh boy…. Zero budget makes for a tough build!
You say constant state of repair but I hear continous improvements. Sweden says hi! A good saturday morning today with some coffe and DirtHead Shed building stuff. Love it.
Just sat down for lunch. Perfect timing..!
Perfect!
this whole truck is really coming together, super cool
Thanks! Slow and steady
It's so satisfying watching you do fabrication work, make it look easy! Also, the little "Hello" after the camera drop killed me 😂
Last episode i said it needed platinum interior the next episode of the perfect seats 🤟💯🎯 i retract the platinum interior statement
Truck looks SICK Dave 😎😎😎
Thanks so much. It keeps getting better
I wish I was 40's again.....lol, great video
It’s a good decade!
My 2 favorite dave's on one video.. those new seats are super rad!
I dig the new wheel color dave!
Right on, thanks
That truck would look mighty fine with a coat of white paint on it!
The amount of times I have had those PRP seats in that fabric sitting in my cart on the website over the last 6 months is crazy. Can't bring myself to pull the trigger on them cause I don't know if they'll be too much. But damn they look good.
Once again Dave proves that 3 driving lights are cooler than 2. Do you have video of that
bumper build? Would love to see it.
I told ya!! Odd numbers for offroad lights is always better
I like those paint booths
Plenty of ventilation
those serape seats a friggen cool. you could tint some raptor liner to match your brown interior on the floor that would be cool👍
Seats look pretty nice and them tires and wheels.
Thanks!
You're practically doing everything to Mom's Spaghetti that i've wanted to do to my 81 Bronco, LOVE IT!
Right on!
Looking good my dude!! I bet PRP would send you some of that fabric for the headliner and maybe door panels….
Making Mexican blankets cool again again
Yep! They are making a big comeback it seems
Nice job Dave. I must be a weirdo. Every time I see one of these seat installs I wonder why they don't make them adjustable. I would always want me seat to slide front and back for when the pedals move around on me 😀
It just ads an extra layer of complexity. But it’s a good idea
Nice upgrade to the Mexican blanket look! I like it.
Glad you dig
Hey Dave, give that Krylon tractor paint a try. I refinished the mower deck and rear body section on my John deere 4 years ago, and it hasn't corroded yet. It is stored outside and does plow duty in the winter.
🦅🇺🇸💪😎👍 Friday night beer's and cheers have enough fun for everyone. Thank you for the videos 🍻
Kickoff for a good weekend
LOVE THE SEATS!!! I have the same pattern on our ‘78 Loadstar 🏁🏁🏁🏁👍🏼👍🏼👍🏼
Nice! Kickin it old school
I installed 2003 chevy buckets in an 89, using cut off pieces of the old bench seat floor mount, welded to square tubing made from angle iron and drilled to bolt to the seat sliders with grade 8 nuts and bolts.
Lol this thing is getting so tricked out over time. I love it. Well done Dave.
Love those seats they even look like they match the door panels.
New wheel/tire combo and seats look great.
Thank you
Those RT's look great. I was an MT guy but I recently went with a hybrid tire (BBATs) and love them. So much nicer onroad while still being pretty aggressive for offroad. Love the new seats, too!
I dig those seats.
Mom’s Spaghetti is looking mean! The new seats look really good 👍
Thanks!
Can't wait to see your truck rolling around Moab
Good luck Dave
Thanks
That was fun you've ot Mom's Spagetti looking good for Moab. hope you enjoy the trip down and the rock crawling when you get there
What! Freiburger with a free cameo lol
The steering wheel and those seats. A thing of beauty. Very nice.
Are those suspension seats like the Summer Camp Jeep?
And wouldn’t it be nice to have a cold saw. I saw Finn use one, and it looked very nice. Less dust and smell.
Gotta love loaning a trailer…
Mom's spaghetti looking good Dave! Good luck in moab! I love rock crawling!
Me too. Thanks
Lovin the rig! Last video I suggested flat black for the truck but with the new seats and the color of the wheels I would do satin navy blue. Would go with the wheels, the brown trim on the seats and the killer design. You have done an awesome job on this!!
Great video, Mom Spaghetti is looking great!! Hopefully you have/had safe travels🤙🏻🤙🏻😎
All good so far!
Awesome. Video mounting my seats this weekend aswell 🤙🏼 picked up some good ideas from your mount
I had same issues of no storage in cab of my truggy so I got my PRP seats with the front goggle pouches and I bought a PRP matching utv center storage bag I hung under the sliding window. Works awesome
Those seats are so freaking sweet Im jealous I have plan gray prp daily drive seats
Time to step it up!!
Wheel's turned out great. I didn't think much of the color when You shot it, but I was wrong. 10 out of 10 Dave. 👏😁
Yes! Best part of Friday's!
Yeah buddy! Kick the weekend off right
Great video 🎉
Thank you
Awesome sit covers brother