It’s a temp controlled soldering tip station, a hot air rework station, a magnifying glass, solder wick, leaded solder, amtech flux, and of course, we can’t forget the appropriate replacement USB connector. Finding the exact one that goes on the board one is trying to fix is never easy….
Yeah nice. But the problem is that no one making these videos actually give any details so people will know properly how. Like what was the temp used and what is that liquid that the board is full of to clean the soldering paste? And many other details that would actually make people understand
Your pulse is perfect.. how do you do that.. ?? I need to change my keyboard usb -c charge port. I dont know what to do... it is a drakonis.. redragon keyboard
I have a lithium jump pack that has an old micro USB charging cord, is that possible to upgrade to USB C? It is there a place I can send it in to have it done? It charges incredibly slow & thought the USB C might give it a little boost.
No not possible, if the pcb was made for micro usb then changing the port easily like this won't be possible, and it won't change the charging speeds even if it was possible
Flux (you can get it as grease or as a fluid) helps the solder "glide" into the right place and the solder wig is just many woven/interlaced copper cables that suck up old solder to make the contacts fresh
Seems easy if you have all the necessary materials, most people don't have them. Question, you changed from USB micro A to USB C connector right? But if the motherboard is not capable of handling maximum transfer speed of USB C, it will work at the max speed of USB micro A, correct?
The usb c Port in this case is just a physical Standard. If you Look at the Specification of usb c you can See that it is compatible with usb 2 which is used by Micro usb. So you get the physical usb c Port but none of the Features usb c Provides when it is attached to a usb 3 /gen 2 Controller which is actually responsible for All the goodness you know and love from usb c with usb 3 and upwards.
Hlo bhai mere phone ka audio jack sahi hai bas charging port jack kharab hai our shop par puchh raha hoon to bol raha hai iska patta aayega pura patta badlega to kya vo sahi bol rahe hain jiska patta aata hai uska aise part jack me change nahin hota kya ya vo shop wale hamara kata jata hai 🤔 Realme 7 phone hai
You make a mistake!!! you've not covered the mic hole to prevent from heat, ctc, and paste.. i prety sure the mic will not work . sorry for my English...
I replaced a microusb port on a power bank, it took me hours, and I made 5 handmade copper soldering bits to succeed.
Perfect. Greetings from Poland.
Tnk u
I work mobile
you really make the subjects you cover come alive!
super easy when you got all the tools
It’s a temp controlled soldering tip station, a hot air rework station, a magnifying glass, solder wick, leaded solder, amtech flux, and of course, we can’t forget the appropriate replacement USB connector. Finding the exact one that goes on the board one is trying to fix is never easy….
@@asakayosaprotemp controlled iron is essential, and a microscope. Rest can be managed
Well obviously dude, u expected a lighter and a fork to change the port? 😂
well no shit i dont anyone with a toothpick and a condom would attempt to fix this
Not when some pads come off and you start jumping traces following a schematic
Terlihat mudah dikerjakan, namun sulit di praktekan🤣
Salam dari Indonesia
Klo tdk punya mikroskop mmg sulit
Perfect. Greetings from Uruguay.
Bhai ek dum clean work mujhe bhi krwna h mbl ka but smjh ni arha offline market m mostly log proper nhi karte
Great work brother! I watch it on my 180" screen projector, so I see 20 times more magnified than your microscope 🙂
Wow, thanks
استاذ ورئيس قسم ❤
Manana
What did you replace the connector on? Great job! 🤓
Great working skills..... 💞💞💞
Thank you so much 😀
Do I need to have the same brand replacement charge port or can I use a different charge port
Yeah nice. But the problem is that no one making these videos actually give any details so people will know properly how. Like what was the temp used and what is that liquid that the board is full of to clean the soldering paste? And many other details that would actually make people understand
Very frustrating, please if you see a good video, send link here
I will Enshallah
Good work which microscope 🔬 you are using
I like how you even nicely soldered the logo on the board. A+
which microscope camera and lens are you using?
Nice job man! 👍 Can I ask, what type of flux and camera you use? Thanks:D
Flux Zero 2uul this video shoot with sam note 20 ultra
What hot fan temperature is needed to desolder? I have an inexpensive soldering station but I haven't used hot fan to desolder ports like usb yet
You have to learn by trying. The brand of the heating device and even the solder used changes the temperatures seriously.
400 C°
What was that brass brush he used to clean the circuit?
nice work ❤
Your pulse is perfect.. how do you do that.. ?? I need to change my keyboard usb -c charge port. I dont know what to do... it is a drakonis.. redragon keyboard
Excellent work and video!
Yes, we can all do that at home, i have all the tool always waiting
Wow. Well done buddy. Well done. Neat and clean. What's ur soldering paste name?
A maioria das que tem nesses vídeos são mechanic
Mashallah very clean work
Which microscope you are using?
Super easy..to watch only
I have all the tool self-taught not really good at soldering how much degree should I used it on
All video very helpful
Glad you think so!
This is the way I was taught.
I've forgotten what those jelly like substances are called.
Curious but Can u use a micro usb replace that spot to?
what's the name of that brown stuff use in cleaning panel
Other level
Which paste did you used at beginning?
Helpful work sir 👍 👌
Super work
I have a lithium jump pack that has an old micro USB charging cord, is that possible to upgrade to USB C?
It is there a place I can send it in to have it done? It charges incredibly slow & thought the USB C might give it a little boost.
No not possible, if the pcb was made for micro usb then changing the port easily like this won't be possible, and it won't change the charging speeds even if it was possible
Note good work
How can you tell which spare port work on which , for example samsung A series t/c vs s series
What is the name of that wire that was used to clean the interface?
Wick wire
Well done
Nice 🙏👍
What is your temperature and air speed sir?
Is this possible to do without the hot air rework station?
Is it safe for the mic...?? Since u doing that without covering the mic...
What is the name of the tool you used to removed the led from the hole
Solder wick. There are different sizes available.
what is that white liquid oil? and what you call that flat wire?
"Oil" is called flux and that flat wire is called solder wig
Flux (you can get it as grease or as a fluid) helps the solder "glide" into the right place and the solder wig is just many woven/interlaced copper cables that suck up old solder to make the contacts fresh
A method that I use without getting tired. But welding wire is better 138
Points k uper se soldering clean krny keliye jo chez use kj wo kya h or kahan se mily gi ?
Ppd
Market se mel jati hai
Seems easy if you have all the necessary materials, most people don't have them.
Question, you changed from USB micro A to USB C connector right?
But if the motherboard is not capable of handling maximum transfer speed of USB C, it will work at the max speed of USB micro A, correct?
Looks pretty hard to me even with the right tools!
@@jackroutledge352 I'm not an alcoholic
The usb c Port in this case is just a physical Standard.
If you Look at the Specification of usb c you can See that it is compatible with usb 2 which is used by Micro usb.
So you get the physical usb c Port but none of the Features usb c Provides when it is attached to a usb 3 /gen 2 Controller which is actually responsible for All the goodness you know and love from usb c with usb 3 and upwards.
@@koningklootzak7788Maybe you should be?
@@russellm7530 you probably are already
What camera did you use to shoot this video?
Note 20 ultra
@@MmanzilsTech Wow 👍👍
Temperatura y aire para poner el nuevo pin de carga??
Camera konsa led konsa
Note 20ultra
@@MmanzilsTech led konsa use
I8 just don't understand how you do this so steady, as soon as I touch solder to a pad it globs to all of them
what temp did you use on the hot air? and what flux is that?
It’s doesn’t matter if you know how to do that
@@ajtechnotips5395 I know how to do it, and it does matter for the finish quality.
@@MrFrambooise the plug was originally soldered with a machine and got now changed by hand, finish quality doesn't matter anymore.
@@maxhouseman3129 what are you trying to say?
Hlo bhai mere phone ka audio jack sahi hai bas charging port jack kharab hai our shop par puchh raha hoon to bol raha hai iska patta aayega pura patta badlega to kya vo sahi bol rahe hain jiska patta aata hai uska aise part jack me change nahin hota kya ya vo shop wale hamara kata jata hai 🤔
Realme 7 phone hai
Whats that compound your heating up with it?
Flux
Kon si iron use kr rahye hai ap sir
Sunshine (sl-936d) and bit Quik wala
How much it cost?
Temperatura y aire. Para poner el pin de carga?
Is that wire you wrobe on it
Very nice 👌 👍
great job
I had my s10e repaired recently. Why my type C pin didn't worked as the other side? Please advertise.
Can you list all the chemical materials used?
Solder 183c mechanic
Flux sd360 mechanic
Pcb cleaner Falcon 990
And wick wire is Relife Rl-2030
@@MmanzilsTech , so thank you
Do you use alcohol to clean
No bro (Falcon 990)
How much heat you put in your ironer to clean the pads?
300c
where is the eaay way....
Ehni soldering and ehni paste kon lgundaaa hundaaa
where did you bought your soldering iron? and what brand.
Sunshine (Sl-908)
It is not easy but with training we can achieve it.
Soldering iron kin sa h
Brother kam ze ke repairing k lag reply raka ❤
United Arab Emarates
Ok ma v ka sawdi arab ki e
Double silicone aluminum to suply
What temoreture did u use
Is he using flux to remove old soldering material?
Super easy, это когда у тебя вокруг разъёма нет кучи smd компонентов?
Double wired to surfaced connections 6+2 supplies
Какой смысл был убирать припой? А если убрал так ложи разъем и сразу паяльником паяй.
This is cleaner. It's not like sloppy Russian weapons.
@@koningklootzak7788 морда у тебя неряшливое удот
Plzz infor your soldering iron
Sunshine (sl-936d) bit (Quick) wala hai
Rectangle edges scren buton sim batery
What temperature do you use? in hot air
Port has changed, so IG 360°
Remove 350 and replace 280 to 300
@@MmanzilsTech Thank you very much. All good friend
How much air@@MmanzilsTech
You make a mistake!!! you've not covered the mic hole to prevent from heat, ctc, and paste.. i prety sure the mic will not work .
sorry for my English...
The Liquid is water or alcohol???
it's flux
flux.
PCB CLEANING WATER
Ага, виски 12 летней выдержки... 🤦♂️
Water
Which flux u have used?
MECHANIC UV 559 AND ZERO 2UUL
How much for changing type b to type c
Using flux changed my life 😢😂
Shop kha ha apki
Sharjah UAE
Smd model konsa hai sir
Yaxun 881d old model
Распаял пластмассу не идеальная работа, нужно паяльником припаивать коннектор чтоб целостность не портить
مدير هذا ic ترتيب انا يخلي 😅
Might want remove the excess solder u split on the chip board. Lol
What's the name of that thing you use to clean it
Sunshine pcb cleaning water
CTC short form
Super easy to short
what the name of that liquid
and the green stuff use on the surface
bina smd k bhi lag jaati he only soldring iron se
❤
Sorry. That does not look super easy. It looks like you have skills that make it seem easy.
What is your microscope
I would say that anyone with knowledge about electronics can tell at a glance that this circuit board is poorly designed.