If you enjoy electronics repairs then check out my DeWalt drill repair video - ua-cam.com/video/XvfcvtecH54/v-deo.html I hope that you find this instructional video useful and don't forget to subscribe and smash that like button! Thanks!
Great tear-down, super easy to follow! My v11 trigger broke in the exact same way. I CA glued it back together and reinforced that spot with piece of paperclip and electrical tape. Super janky but it works like new.
Amazing teardown mate! I can't believe how many parts you had to remove for a single switch 🙉 Awesome video and great expertise for electronics! Keep up the great work 👊😊
Question...you mentioned not having to bend the terminals, one of the terminals on my dyson v11 was snapped in half (long ways), would it effect the use of the vaccum ? And is it dangerous to continue using it ?
0:12 😆 I like when companies fix weak points on products, and you get a replacement and they've fixed the issue on the new version. That happened to me with a desk chair. The legs bent, and the replacement base had supports welded across the legs. I'll know what to do if my housemates dyson breaks now 👍 Satisfying vid 🤌
The V11 absolute pro series has upgraded their trigger system with better reinforcements around the trigger fulcrum. Also heat and abrasion are the enemy. They also updated the hepa filter and premotor filter by putting reinforcements to the webbing on the premotor filter and better sealing rubber O rings to prevent bypassing back into the motor housing causing abrasion and motor overheating. This also prevents the battery from overloading which in turn draws heat into the handle and softening the trigger fulcrum, causing it to crack and break. The new upgrade also includes a clip in removeable battery with a slight better and bigger handle opening for cooling. If you really want to reduce static cling of fine particulate in the cyclones and build up. Cut a few pieces of bounce sheet and throw it into the bin. It does marvels.
If you enjoy electronics repairs then check out my DeWalt drill repair video - ua-cam.com/video/XvfcvtecH54/v-deo.html
I hope that you find this instructional video useful and don't forget to subscribe and smash that like button! Thanks!
Il video più preciso, efficace, professionale fra tutti quelli visti. Complimenti
Thank you so much, glad you enjoyed!
Great tear-down, super easy to follow! My v11 trigger broke in the exact same way. I CA glued it back together and reinforced that spot with piece of paperclip and electrical tape. Super janky but it works like new.
You are the guaranty for life for these electronics 😅👍
😁 thanks for the support mate!
Amazing teardown mate! I can't believe how many parts you had to remove for a single switch 🙉
Awesome video and great expertise for electronics! Keep up the great work 👊😊
Glad you liked the vid. Yeah 🤣 lots of parts! And overall many parts in this little vaccuum! Thanks for watching mate!
@@RestoredChannel my pleasure 🍻
Mission accomplished,You are so meticulous and accurate,thanks a lot
Wonderful comment, thanks mate!
Amazing explanation of trigger repair
I appreciate it👊
And just like that my v10 is working again. Thanks for the video :)
Awesome! Glad you made it work😁
Gördüğüm en profesyonel klas video çok kişi yapamaz
Question...you mentioned not having to bend the terminals, one of the terminals on my dyson v11 was snapped in half (long ways), would it effect the use of the vaccum ? And is it dangerous to continue using it ?
Hi, solid connections are essential to prevent arching and burning.
0:12 😆
I like when companies fix weak points on products, and you get a replacement and they've fixed the issue on the new version. That happened to me with a desk chair. The legs bent, and the replacement base had supports welded across the legs.
I'll know what to do if my housemates dyson breaks now 👍
Satisfying vid 🤌
It was a nice surprise to see that they had fixed this. Hopefully it will last longer now👍Thanks for watching mate!
The V11 absolute pro series has upgraded their trigger system with better reinforcements around the trigger fulcrum. Also heat and abrasion are the enemy. They also updated the hepa filter and premotor filter by putting reinforcements to the webbing on the premotor filter and better sealing rubber O rings to prevent bypassing back into the motor housing causing abrasion and motor overheating. This also prevents the battery from overloading which in turn draws heat into the handle and softening the trigger fulcrum, causing it to crack and break. The new upgrade also includes a clip in removeable battery with a slight better and bigger handle opening for cooling. If you really want to reduce static cling of fine particulate in the cyclones and build up. Cut a few pieces of bounce sheet and throw it into the bin. It does marvels.
Nice renovation
Great video, love it ❤️
Thanks mate, appreciate it 🙏
Do you know if the newer v11s have a better trigger. I just bought one sv28 2023 model.
Sorry, I have no experience with the new model. Hope you're happy with it though!
I found out that They have the updated v15 trigger. Thank you for your answer!
Good there are so many repair videos for this well known issue it is, no Dyson ? This product was arround 600 euros ... Worked 1 year .
Great video as always🔥
Thanks man👊
Dude, never mind the repair job...where did you get that cool mini socket / screwdriver set? 🧐
It's a Mako precision bit set from ifixit.
You are a machine!!😮
Thanks for watching!
Where did you get that piece to hold the trigger on?
On amazon, search for INF or dyson trigger lock👍
Linkteki tetik daha güçlü gözüküyor v11 olurmu denediniz mi hiç
nice and clean
Bonjour pourriez vous me dire ou avez vous acheté vos tournevis pliant tournevis flexible ?
Just google ifixit screwdriver set. I got mine at a local shop.
Do you have a link for the trigger you used to repair the vacuum?
Sure mate: a.co/d/55hTSQ6
Amazing!!!!!
Hello sir what was that last auto trigger mechanism piece?
It's a trigger lock, search Amazon B08FM9327Y. Thanks for watching !
@@RestoredChannel cheers 👌 and thank you
Should have been a piece of cake for me! Just broke both the circuit board contact connectors trying to get them through the cover piece. 😞
Metalik filtreye hava tutsam sıkıntı olurmu ?
It translates to metallic filter?
Nice work bro. What happened to the gloves? 😁
Thanks mate! Didn't need them for this project😉
@@RestoredChannel I like those "pervert" gloves 😂
🤣🤣
Can you link the tool set that you used?
Here you go mate: www.amazon.com/iFixit-IF145-299-4-Driver-Bit-64pc/dp/B0189YWOIO?ref_=ast_sto_dp
Once I take out all parts. Highly likely I will need to bring back to Dyson service Center ask them to reassemble back😂
🤣🤣👍
👍
👏🏼👏🏼👏🏼
❤️👊
maybe I don't remember to put back together🤣😂
👍🙏🙋♂️
00 13 😂😂😂
I would probably take it apart and not know how to put it back together 👍😂
🤣🤣 had the same feeling. Luckily the camera was there😉
👏🏼👏🏼👏🏼
🙏👊