How to Replace Water Pump 07-09 Toyota FJ
Вставка
- Опубліковано 12 сер 2019
- Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00239
1A Auto shows you how to repair, install, fix, change or replace a broken, bad, or leaking water pump. This video is applicable to the 07, 08, 09, 10, 11, 12, 13, 14, Toyota FJ Cruiser.
This process should be similar on the following vehicles:
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oCT/1AXAA00013
• Pry Bar 1aau.to/oh6/1AXAA00020
• 10mm Socket 1aau.to/oyw/1AXAA00017
• 12mm Socket 1aau.to/oCZ/1AXAA00015
• 14mm Socket 1aau.to/oCZ/1AXAA00015
• 19mm Socket 1aau.to/onT/1AXAA00043
• Coolant Funnel Set 1aau.to/oB/1AXAA00116
• Trim Tool Set 1aau.to/oj4/1AXXX00006
• Pliers
• Ratchet 1aau.to/oFy/1AXAA00016
• Socket Extensions 1aau.to/oCZ/1AXAA00015
• Torque Wrench 1aau.to/osJ/1AXAA00044
• Floor Jack 1aau.to/ojG/1AXAA00068
• Jack Stands 1aau.to/oiJ/1AXAA00065
Subscribe: / @1aauto
Check out our playlist:
Toyota FJ Cruiser 2007-2014 1st Gen (XJ10): • Toyota FJ Cruiser 2007...
For More Info visit us at 1aau.to/h/bMD/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√
This video is not thorough, it is misleading. Do not take off or loosen alternator. Do not touch your A/C pump. Do not take your upper cover or MAF. Do not take off your pulley housing. Only parts to remove to get the water pump out and back on are your Fan (4 bolts), Shroud (2 bolts), 3 tensioner pulleys (1 bolt each)and upper inlet housing (5 bolts). It is way easier than this video makes it out to be. If the video was thorough, it would explain that all the other steps are for replacing other parts and are not required.
Very instructive video. However... I was going to replace the water pump myself, but this looks like an absolute PIA nightmare.
Do yourself a favor, when trying to get that upper A/C bolt that is at the back of the compressor. Just remove the alternator. It is a couple of 10mm bolts to hold a couple of brackets on and a 14mm bolt at the upper alternator bolt. It makes the AC compressor bolts a lot more accessible.
Hey all. Just wanted to add. U donf need to relieve the a/c bracket for just the water pump. U can remove the tensioner pulley but... don't forget. The tensioner is a reverse thread. So right loosens left to tighten 🤘 thanks for the video
This should be titled water pump and belt tensioner. I believe the water pump can come off without having to touch the a/c compressor
Great video! Very well done..and appreciated!
These 1A Auto videos have been killer for helping me maintain and repair my 4th gen 4Runner. Thanks a ton for making them!
Thanks for the detailed video, perfect timings as I had to replace mine this past weekend! Helped immensely! Lucky I was able to skip removing the tensor pulley assembly, although I’ve done it before so I feel your pain.
Man this the best installment I’ve ever seen...on point
I'm replacing all of my pulleys and tensioner so I figured I'd do the water pump at the same time. The belt tensioner is a nightmare! I had wiring looms in the way that weren't in the video and it took many extensions, wobblies, and swivels to get it done. But I got it done.
Do I cry now or later. Thanks for the video. Dreading doing this but I think I'm gonna have to.
Job well done. Almost as tough as the 2010 Camry 3.5. Thanks
I truly admire Len's expertise, patience & the humour he injected into this job, "well done" cos what a pain in the neck that job must surely be. Full cudos Len
Other than that this video is amazing. Thanks for all that you do! God bless
Informative and thorough video! After watching it, I hope Toyota don’t mind working with supplied parts! :D
You're a genuine bro great job, awesome..!
Very detailed video mate, I am going to start the job on my 2015 TDV8 Landcruiser and could not find any videos. This was very helpful.
how many miles on your 2007 fj when this orginal water pump went out out?
Damn you guys are getting some good videos if this Fj. Appreciate them