The BIGGEST REPAIR BILL the Car Wizard has ever given me. Welcome to Ferrari 355 ownership...
Вставка
- Опубліковано 1 жов 2024
- New Hoovie's Garage Countach T-shirts AND $5 STICKERS here: hooviesgarage....
FOLLOW ME ON INSTAGRAM! / the_real_hoovies_garage
Follow me on Twitter! twitter.com/hooviesgarage
Follow me on Facebook! /
That shop did an excellent job on that Ferrari. I'd say they added a pretty substantial amount to its resale value. $2,000 well spent.
You're a bot magnet, buddy.
I'm with these other guys. Only for fans over 18 years old indeed.
It was $2k to do that work? That’s not bad at all. I must have missed him say the price.
@@DoWorkExotics 2000 for hoovie nice ad for the business they done a savage job
@@lilBabyBornInCalifornia he’s talking about the bill from vango, the detail/respray shop.
Wow that F355 looks great. Hopefully that wheel cap shows up mysteriously in a day or two.
2,000$ seems like a bargain for what they did
@@ironmonkey1512 might have been a give a good deal and do a spectacular job to secure more work moving forward. He likely knows who Hoovie is and probably got recommendation to go there in first place. Guy may have not made a ton on that job but securing future work is more important for growing a business. Not to mention the publicity from Hoovie using them and talking about their good work.
He can just cover it up with Hoovies garage stickers.
Fancy seeing you here
I was going to say that banana yellow is brash and tacky, but, #355life.
Iton monkey, paint work on a Chevy will run you that today.
Everyone in Kansas are currently searching vigorously on the sides of every road for a Bentley Wheel Cap to sell Hoovie for $1500 🤣
Hoovie can trade it for that BMW he can’t seem to sell.
You should create a “missing” flyer for the lost wheel cap. Make it look like a Milk Carton.
In the lighting of the Wizard's shop, you cannot tell that anything was repainted. Vango must use super-intense lights so it appeared to match worse than in natural light. Just shows what letting professionals work on your car can do!
That's pretty common, at least in my experience in the detail biz over the years. A good detail/paint shop will have intense lighting, which of course is needed for the work they do. So even minor differences tend to stand out more. But under natural sun (or most garage lighting) you'd never see it.
it's not the intense lighting, it's the high CRI lights that do the trick, i bet that wizard's light don't even have CRI ratings while the detail shop's lights are about 90 or 95 CRI
It was the opposite side you seen between shops. It looked that it was only different on the one side.
Fluorescent lights show a lot of odd color variations. LED (if the Wizards shop has them) doesn’t show it much.
Its not about light at all 😂 notice how right side is „little” off and in wizards shop you can see only left one😆
Cant believe they left it like that, that back panel is so little, that they could paint it too
the yellow came out great, I wish they had painted that one panel that had been painted before so it matched the new work all along the bottom. You have 3 minor shade differences now and it could have just been 2. Would have been worth a few hundred to repaint it also. Other than that, well spent $2000. Put some black fabric tape on that top split to get you by till you replace the top.
They might not have noticed until it was all ba k together and detailed at which point they had probably already called Tyler to come get it later that day.
that's where the art of blending paint into the adjacent panels comes in. It usually needs to be done "on-car" thought, for more $$$
Love the way Tyler supports the different types of car businesses in his area 🙌 👏 👌
@Yippee Skippy he probably wanted to have it done well, not just done
ua-cam.com/video/tT9DXJtwcOw/v-deo.html.
@Yippee Skippy
I think he would use them for a full paint job. But this car was a detail with minor paint repair.
@Yippee Skippy he wanted quality work not a hack respray
@Yippee Skippy well why didn't he go back?
To own a Ferrari F355 is a very special and expensive pleasure - I had mine now for 13 years, a F355 GTS from 1995
The attention to detail and going above and beyond, even for a 2k contract, really shows why these folks are successful - so many shops just don't care about going that extra mile.
Ya I was thinking 2k was cheap to do all that
Tyler is an advertising platform for the shop so he got more than what he paid for for the exposure. Doubt you could walk in with your Ferrari and get the same work for the same price. Tyler gets a discount with the car wizard as well.
Totally agree
@@oldanslo I bet you're right. No way that Ferrari paint and detail was only 2k. Not a chance.
@@oldanslo paint work is not as expensive as you think as long as you’re not painting an entire car and filling 100 dings. A good shop like this could get that work knocked out in a couple days which is probably what happened.
Wow, that paint shop smashed it out of the park! Maximum kudos to a very talented team.
I'd retrace my steps again for that wheelcap Hoovie, definitely worth trying to find it over buying a new one
In a taller vehicle maybe
unfortunately even if he retraced it, it clearly broke off from age, so it likely shattered into a million pieces. you can see where the brittle plastic came apart on the bolts that held the cap on in the first place.
That center cap is now on some dudes garage wall, with a story of how it used to be on Jean Claudes Bentley. Soon to be on eBay with his signature for $2k... and Hoovie bidding to get it back.
ua-cam.com/video/tT9DXJtwcOw/v-deo.html.
@@petequinones3454 I doubt it, plastic center caps explode the second they fall off, and thats ignoring if anyone else runs them over afterwards.
I was rooting for you so hard to find that wheel cap, Hoovie. Would've been a big W but alas, it delivered the comedy gold in the sentence "Stuff just falls off your Bentley."
I can't 3d print a new hubcap, but I can make a poor facsimile with a sour cream dish and tinfoil.
I will keep that in mind
Yeah I 3D Printed wheel caps.. "official" dodge caps were $120 for a set of 4, being the "faux" stainless look. Measured, Designed and printed. On my second set, being there so simple to change and make.
@@HooviesGarage Just remove/hooptie the other 3, that way, at least they all match! :)
A silver mailbox letter (B) from hardware store would set this new center cap off. Hoopty mods 😎
Trying out a new shop? What you mean you weren’t impressed with the high quality work at Maaco? Especially the paint job they did on your Murcielago’s front bumper? 🤣
When he said "Good news" I expected him to say he bought a Dacia Sandero 😂
Street legal dacia would be a collector thing in usa i guess
Great! Now moving on. . .
James May reference?
@@markbennett6658 permission to say "Oh cock" 😆
I would like to suggest that just one time the Wizard and Hoovie flip a coin and its double or nothing on the car bill. That would be exciting to watch.
Didn't work for Dennis Collins on his Honda monkey bike. His advice? Never flip for it.
Just got one question for you Mr. Tyler Hoovie. When will there be an update on the million mile Cummins? I’d love to see the odometer roll over to 1,000,000 miles!
As an ex modern Ferrari owner, I can call your repair bill "cute", even "dainty". I am done with Ferrari not just because of the repair costs but because during 6 years of ownership I think my cars spent an aggregate 2-3 years in the shop WAITING on parts.
I had 20 years of Ferrari experience and spent enough to buy another house. Done with F cars and moved on to Porsche
🤣
Kind of looks like the cap was stolen or "forcefully" removed. The plastic around the securing bolt looks that way. Stinks for you but I did buy 3 shirts so hopefully that will help with the bill to replace the center cap... 🤣
@imoes. sexyy Reported for spam!
Yeah, it was probably partially cracked from being overtightened, or someone attempting to pry it off for a tire service before realizing it was secured with a screw.
I see those broken on aftermarket wheels for those reasons all the time.
ua-cam.com/video/tT9DXJtwcOw/v-deo.html.
@@cindysue5474 The 🤖 won't be bothered
Car owner: it cost $15,000 to fix my Ferrari!
Airplane owner: that's cute.
I've always lusted after the F355...
I personally hate detail work (doing it) - I just don't have the patience for it. But man, few things are as satisfying as seeing a car after it's been done by a professional like that. Wow!
It's not bad. I did it at a car dealer for 3 years. Just listen to music all day and got to drive all kinds of cool cars
Same here. I would not be able to do that work even for a hefty pay. I am simply not capable
I find it relaxing. And the extra drugs you find help the shift go by.
That shop did an excellent job. It's hard to find people that do good work.
I love the “you’ve got a bill to pay” skit even though it’s just a joke it’s still funny every time😂
Was Man to Man defense rather than Zone.
@@dbeasleyphx NERRRRRRD alert
I think Wizard should buy Danielson a lot more than a pizza lol. He’s been doing great quality work since his arrival.
Definitely not Macco. Fantastic paint job. They wanted to impress and they did. Wow!
They definitely take pride in their work. You can tell when someone cares.
They can appreciate a nice car and they want to see it look it's best.
Holy cow the wizard lost a lot of weights looks good. Hope all is well
Less gray in his beard too, probably just taking better care of himself. Good for him
@@pops55650 He trimmed it down. Makes him look younger, and is less likely to get pulled into a belt, pulley, rotating tool.
Pretty sure he just trimmed his beard.
Hoovie's bills helps pay for the Wizard's gym membership.
@@pops55650 They got some fancy goo at the dollar store you can rub on your beard and make it change colors.
Well this video was nice and heartwarming. Maybe 2022 will be better... For all of us...
from sitting on backroads with hoopties , to now owning exotics and showing us all the struggles lol. watching you helped me get through a tough time 4 years ago by falling in love with cars again
I started my journey looking up gen1 viper videos and hoovie had bought his. 3 or so years later I finally bought one! I’m happy to support hoov, the wiz, VINwiki, and occasionally tavarish.
Dictionary synonym for “Italian Cars”:
*TITANIC* (save yourself from it)
That hubcap reminds me of the bezel that I lost off my car after hitting a retread on the interstate. I was pissed that it cost $150 for a replacement. I would be walking down the highway looking for that hubcap!
So would I how to do the same thing for a key I lost and I found it 8 hours later
Retread ties absolutely should be illegal. There are ridiculously dangerous. I don't know about ya"ll but id rather pay a few cents more for my goods.
I had a splitter broken off from hitting one that got thrown up by the car in front of me Impossible to avoid, but I managed to limit the damage to one corner.
All of that work to paint and paint correction for only 2k, wow! That’s cheaper then cheap, amazingly cheap I have to say,
Reading about people grabbing multi-figures monthly as income in investments even in this crazy days in the market, any pointers on how to make substantial progress in earnings? Would be appreciated.... I'll be in the comments
Am investing in crypto now........the dip is a clear sign for new investors to come in
Yeah this is absolutely the best time to buy and Invest
I wanted to trade Crypto but got confused by the fluctuations in price
Trading crypto with Expert Ali has being a game changer for me
He's obviously the best i invested 2000USD with him and I made a profit of 9101USD
I have always thought Ferraris to be ridiculous show off toys and your channel has totally re-enforced my belief…..I will never own one of those …uh……cars.
That detail shop is seriously impressive. It's hard to find that quality of work around these days.
Tell the wizard that if his back starts hurting in the next few weeks it's probably the shoes. I've seen it happen too many times with these memory foam type shoes. Feel soft on your feet but throws your alignment off. Starts with your knees and hips which you probably don't notice but those things can lead to back pain and you WILL notice that.
“Unless inflation goes really insane…”
Sorry Hoovie, it already has
Jeff Snider has the data to say no - it’s only the result of supply squeezes. Fed money printing is in the form of bank reserves, which can’t be spent or used in the general economy.
You definitely weren't around for the late 70s/early 80s. Home mortgages were 16%
@@TheFloridaStig Yeah but a home was $40k and people made more on average than they do now.
@@IKhanNot That's funny. It seemed like a real struggle at the time. BECAUSE IT WAS!
@@kendallsmith1458 For some it may have been. Where I live, house prices have gone up over 300% in 20 years and cost of living too has gone up. Average wages? Not so much and even though I have a sizeable down payment for a house I'd be saddled with an expensive mortgage. The funny bit? The money I have for a down payment would have bought the same house for cash 20 years ago and several of them in the 1970s yet it doesn't cut the mustard today.
VanGo is brave to show you that panel paint in that lighting. Panel painting in yellow is tough. Looks great outside though.
Beautiful car now!!!!
Your detail / paint shop is really top notch. They did a great job!
Seems as if that job should’ve cost more than $2000. But hey great advertisement and job on his part!
The Ferrari looks beautiful. Pity about the soft top. I'd stick a patch on the underside and try to disguise and dye the outside. I am a cheap patcher upper though.
Meh, it is a convertible. The only time to use the top is if it is raining...and who drives their Ferrari in the rain?
Respect to the cheap patcher mentality! Drive it and love it!
Flex tape
99% of the time I'd agree with you. However, if you can't afford to properly fix a Ferrari... then you can't afford a Ferrari. These cars are not for people who take short-cuts or are looking to save money.
@@Matt85ism "These cars are not for people who take short-cuts or are looking to save money."
Really? Hoovie bypassed the power top mechanism by converting it to manual. Sounds like a shortcut to me...
Might as well get a machine shop to make you a custom set of wheel caps with jean claude van damme's face on them for $1600.
On the yellow, the bottom looks a few shades lighter on camera. Am i seeing things? Looks great at most angles. The detail work transformed this car. A color matched hardtop would make it absolutely perfect.
@@technom3598 I've seen fiberglass and carbon fiber hardtops for F355... there's several companies that supply them unpainted since early 2000's.
The paint is definitely off. But the guy said that the panel behind it has been repainted before. Tough to match everything.
I saw it too. Yellow is very hard to match and for $2000 it looks great but it definitely looks lighter
It doesn't match 100%, but the lighting in paint/detail shops tend to be way over the top and will highlight any slight variance in color. In the wizard's shop, it all looks perfect.
@@phantom240 because right side if fckd up and he showed left in wizards shop 🙄
Here is a thumbs up to get you 1¢ closer to replacing that center cap 🤪 // 1/16,000th of the way there!!
Lol.. "I'll fuel up my yacht!", you gonna buy that guy a pizza? "Eh, maybe." lol.
savage!
Stuart and his crew did an amazing job. Looks great
Props to VANGO, that workmanship and quality control is UNBELIEVABLE. I’m speechless. If I lived in the area I’d use them in a heartbeat.
"Here`s my Bentley,now where is my Ferrari?" All for $50k.
10:45 I would be disappointed. Should’ve just blended the panel. Wouldn’t taken no time to blend some yellow 7” into the neighboring panel, to get it seamless looking.
Don't even understand why people keep buying those shitboxes.
Wiz: "It tastes like bananas!".
At that point, after all the mechanic fluids Wizard has taste tested over the years, I couldn't figure if he was trying to punk Hoovy or not either.
That was his plan all along xD
Hoovie teaches me that I should never ever buy a Ferrari because they are JUNK.
Vango, did a great job, of not only repainting it, but the detail they did was over the top. You need to get the top fixed ASAP, to complete the look. She is now beautiful Ferrari... You saved another one...
That Diablo looks so good up there on the lift. Wen more Diablo content ser?
Wow, that is a nice 'detail'. Damn Tyler, they did a great job and now the amount of business they will get from it...he should have given you a giant discount. You have gotten really lucky with the car in many ways. It cost 13k to fix, but that was better than it getting destroyed.
2k for the amount of work they did is already discounted
😬
@@PedroPioLopes Agreed. As a detailer, who doesn't do such extensive body-shop work or repainting, there is no way that $2000 isn't a discounted price. People often vastly underestimate the work and cost of a good detail, and these guys were pulling panels, doing body work, and painting on top of all that. Oh, and I see that these guys are Ceramic Pro shills, so now I *know* they gave a discount to Tyler because I guarantee they're regularly charging people ~$2000 for just a ceramic coating job worth half that.
@@phasmata3813 if I had to guess, on a Ferrari, that is normally over $10,000 worth of work, and most likely far over it. Like I said in another comment, it was a smart business move to heavily discount to earn Hoovies future business of his every revolving fleet as well as earn business off the UA-cam plug
ua-cam.com/video/tT9DXJtwcOw/v-deo.html.
I'm going to find that wheel cap My self for 1500
Looks like new. Great work by all parties involved! :)
First detail job where it looked like the guy did some legitimate work. Looks incredible.
In 1997, I was walking the Brooklyn Heights Promenade, stopped, looked around, then down towards the highway, and on a ledge about 10 or 12 feet down, I saw a Rolls Royce hubcap, the kind Silver Shadow IIs used. I found that odd. Now the search for a Bentley center cap in Kansas.
Just try to make one on 3D printing. Should be a lot cheaper
I must say that the work that wizard does on cars is....magic.
How is it magic when Hoovies cars always return with the same problems?
"Buy Danial a pizza or something"
"Maybe"
😂
I love the Wizard, watch his own channel stuff often. seems like an awesome dude to hang with
That shop did a crazy impressive job on the Ferrari
3D printing the hub cap is the easier part, it would be harder to finish it to match the wheel
THE PRICE OF A FINE YELLOW FERRARI HAS JUST BEEN INCREASED AFTER REPAIRS AND DETAILED WORK
Wizards smile when Tyler pulls in. $$$$. New fancy safety shoes.
Them boys did work. That's a solid find for a paint and body man.
That detail is amazing, those guys have earned your hooptie fleet to fix!!
How about getting a 3D printer and making a new hubcap?
The before and after of the yellow Ferrari is so nice, your new shop did a great job!
Great work on that detail job. Complete transformation. I've definitely been there with the wheel cap situation.
Companies do metal 3D prints now, I'm sure someone could build a new Bently wheel cover to the right specification. The #48 is still a beautiful car though even with the "bus seats" or maybe even especially because of them. And the 355 looks straight out of the Gran Turismo paint shop under those lights.
Forget catalytic converters, I'm going after hub caps, lol.
$13k?!? JESUS, I could buy a complete beat-up NA Miata for that!
You should learn to double clutch. It's pretty satisfying and invaluable when you've got hurt synchronizers.
Unfortunately not all transmissions are tolerant of floating gears especially older ones
@@2ndGenBen Floating is skipping the second clutch disengagement. I wouldn't do it on any transmission that doesn't weigh at least a 1000lbs... and even then most companies don't want you floating their trucks. Double clutching used to be required before synchromesh transmissions came out: so most cars before 1960. There's no reason you can't do with a synchronized transmission though, it's just less work for the synchronizers. Drivers were often asked to double clutch in endurance racing. It's not faster, it's just less wear. If you keep revs matched (near enough) before you select the next gear, worst case scenario is essentially the same wear you would have had for the shift without. Get it right and it's impossibly low shifter effort and zero synchro wear. It's guilt free downshifting, and really noticeable at higher rpms in lower gears where rpm change is greater and the synchros have to work harder to accelerate the clutch plate, inputshaft, and countershaft.
I liked how you could tell the people at vango loved the cars you brought in, you can tell that they did a great job on your car
Your 348 is like the SR-71 Blackbird: sealed while warm and moving, but when it cools, seams open and fluid leaks. At least you're not leaking *fuel* the way the SR-71 did. (Lockheed had to develop a special fuel that *didn't* catch fire easily to avoid disasters.)
I don’t think too many people here have experience using a sr-71 black bird do.
For anyone reading this, I highly recommend googling the SR-71 story on reddit. Absolutely legendary.
@@dankquixote ua-cam.com/video/3kIMTJRgyn0/v-deo.html blackbird story
$2,000 is a deal and a half!! Their phone is probably ringing off the hook!
Yep, ever Ferrari owner in Wichita. Oh, wait...
I think Vango is going to be a new regular on the channel. He did nice work and he is good on camera.
Shoulda had a contest and offered a reward for that cap. You'd have a bunch of middle age guys poking around the side of the freeway like they were looking for Pokemon.
I'm comment 666 which is also my favourite model of Ferrari. coincidence? I think not.
and the wife is still waiting for her R8...
Vango are the guys who do my paint corrections and ceramic coating. They did an amazing job on my Ferrari 348!
I love watching bill time at the Wizard's is so fun. Especially funny when Tyler passes out! :-)
hey tyler. why is it yellow? cause its a lemon!
Oh look another vehicle that Wizard didn't repair correctly.......come backs come backs come backs. Poor mechanic work. Maybe he should concentrate on being a reputable mechanic rather than making constant videos saying he is one. Hoovie spends $13,000 and they can't even give it a quick courtesy wash? Man what a chump.
Holy smokes, that body shop did a terrific job on the 355. I wish I could find a solid shop like that in Los Angeles.
That shop took advantage of the opportunity,did a great job and will get business out of it...heck,hoovie brought him a Bentley
They did a fantastic job! The car looks amazing!
The Nova was driving, must be making progress!
2K for all that work, and a darn good job too? Serious bargain.
I know you might think this suggestion a bit "urgh" but there's a way to save a ton of money on that Bentley hub cap:
Use the one from the opposite side to make a mould, craft a replacement with fibreglass or resin, paint it to match, job done ...you might even get that nice body shop man to do it for you. Failing that model a replacement in CAD, send the file to a good 3D print company, part sorted.
you truly have found a group of amazing guys around u to help restore these wonderful cars, amazing work done on that 355, can't wait to see how the Bentley will come out
Wizard needs to trademark "you've got a bill to pay" and make merch
Before something else major, major, major breaks, sell the 348, the 355 and the Bentley. What the heck, because they'll also bankrupt you, the Countach, the Diablo and the Merci.
TYLER!!! SCREW THE 355 ALREADY!!! THEY'RE NOT WORTH IT! Focus on your F348! Take all the money that you would be willing to put into the 355, and put it into your 348 instead... F348 that you own already has aftermarket seats, that means it's not factory, it's a driver, not an investment, you're not going to hurt it any investing in things like low-resistance cables, and iridium multi-point racing spark plugs, high-flow catalytic converters, straight pipe exhaust, and other non Factory performance upgrades. Doing that would give you a car that performs just as well as the f355, except you would have the reliability and (in my opinion) much better looks, of the F348. That F355, it's nickel-and-diming you to death, for an unreliable car, that isn't as good looking as the black Ferrari you already have... Invest in the F348, the F355 just isn't worth it...
$2K for all that work!!!!! I got ripped off... I had some bubbles forming on my quarter panel on my Maserati and I got charged $2K about the size of a quarter....
WOW - what an awesome job done on the F355. It's simply gorgeous inside and out.
Audison Hoovie?? AUDISON??? No mention of your setup, NOTHING?!? Car audio isn't dead man, get talking. It's still very much a thing for guys who were young enough to enjoy the golden era of car audio in the late 90's to late 00's. I have Focal 165K2P's waiting to go in an 07 350ZR... what is the 355 running up front??
But this can't be possible!! Because according to Hoovie and Scotty Kilmer ONLY BMW's break and leak!! Only BMWS are prone to maintenance! So this can't be true!!
Tyler, ever thought about doing the global best? For example 60s-00s best from Italy, Germany, Britain, Japan, and US? THAT, would be quite a collection.