HOW TO AN FITTINGS TO HARDLINE
Вставка
- Опубліковано 21 кві 2021
- HOW TO AN FITTINGS TO HARDLINE
EASTWOOD BRAKE LINE FLARING TOOL
Brake line forming tool
Brake line bender tool
3/8" cable clamps
This is How I set up part of my fuel system. I used An fittings and Nylon braided fuel hose to connect from hard lines to the fuel tank and the fuel rails on the 4.6 DOHC in my 67 F100. - Авто та транспорт
The bob ross of car restoration.
Thank you for making a straight forward how-to without a bunch of fluff. Straight to the point, as a how-to should be.
@03CanadianF5 thank you for the kind words
I will never know how to do my fuel lines because i will be drooling on my shirt 3 minutes into this relaxing auto gem🤣 ASMR isnt just for my wife now lol
Thanks for the information. You do nice work, attention to detail !
@stretch62 glad to hear that and thanks for watching
I did find it helpful and thank you for taking the time to make the video !
@CDNBroncoLife awesome. Thanks so much for the kind words.
Thank you Greg nice and slow, able to absorb Everything Thank you Brother
@Michael Cuoco thanks you. Glad it helped
Thanks Greg! Super helpful bud!
@Bullittooth Tony thank you.
Thanks! This was very helpful!
@jb19511 thanks
Wao thank you the explanation !!- you made my day now that I working on my dune buggy 1972.
@leonardo Diaz thanks. Good luck on your 72 dune buggy project
Very nice, good handy tip!
@matar501 thanks for the nice comment.
Appreciate you, man! I’m replacing my fuel filter for an aem one.
@E Makal thanks
Well done.....Great Video work and narration.
@Bobby Wartman thank you
Awesome video. I am confident enough to do the work just didn’t have the education in the hardware. You made my day. Hope your car coming along nicely. Thanks G!
Thank you @Geordie McBain. Glad to hear the video helped. Makes doing the videos all worth it. Good luck on your project.
It’s amazing what you can do once you know how 👌
@Patrick Curram I totally agree 👍🏻
X-treemely Helpful !!! Thank You!!
@Karl Tuthill nice to hear that. Thanks
You helped me out man thank you and god bless
@Green Leaf Native that is great to hear. Thanks
Good video. Nice simple explanation
@jacob belmontes thanks
Thanks for this video 👍
Thanks for watching
Thank you!
This was a huge help Sir. Thank you
@jameslaiola4976 thanks nice to hear that
awesome video, So clear and precise...appreciate your soft voice, easier to follow all your instructions
@ Richard Pucci thank you
Nice job looks good.
@Karen Thomson thank you
Awesome. Very helpful
@Fat Dan thank you
Great video and info💪🏻👍🏻
@peterpontrelli66 Thank you
Great video!!
@James Hero thanks
Man this will save a lot of time not having to run high pressure soft fuel line from the back of a 75 Caprice all the way to the front I'm just going to cut it off in the back and the front and run soft lines for the fuel thank you I wasn't sure if you could connect the soft line to the hard line
@Donald thanks. Good luck on your project
Thanks for the clear and concise video. After tightening the 37 degree flare fitting with the hardline, are you able to spin the hardline while holding the fitting?
@Chen Ying thank you. I don’t think the line should spin after tightening. Especially if the other end is already connected to something.
great video
@1080sucks thank you
Awesome thank you Awesome Job
@RsToEvo thank you
You give me bob Ross vibes ....I like it 👍🏽
@fredriver5567 😂 thanks
Excellent.
@Road Runner Garage thanks
For What it Is Worth, when using tube nuts and sleves I can flair with a standard 45 deg flairing tool but just not flair it fully. The sleve does a good enough pressing the tube against the fitting and seals just fine.
@cheaptick thats cool
Doesn't mention the type of hardline used. Aluminum. No manufacturer recommends aluminum AN fittings on steel or stainless hardline.
Thank you
@amicrazy you’re welcome
Nice video and very informative. My question to is: can you use steel hardline as well as aluminum hardline with AN fittings?? THANK YOU
@Abdo Shair thanks. I believe so. You should double check with the company you get them from.
top video bro
@AUDIO CAR WORLD thank you
When would you use AN Compression style fittings vs the flared end fittings?
@tekman05 Like I mentioned in the video. I only have used a compression fitting once. I usually flare all my lines.
Hey can you post a link of the 37 degree flair fitting. I can’t find it, only compression fittings come up when i search
@TheMrAboy hope that helps.
www.ebay.com/itm/321917539474?hash=item4af3c7d492:g:RzkAAOSwyApcKklq
Would compression fitting be good enough for all types of pressure? Im thinking about fitting that to my fuel system on my Calibra Turbo, and also install them to my servo lines if usabale, thx for any good answer
@whatigame I am not sure. If you are able to, ask the manufacturers you got them from. Good luck
Nice video! Why did you go with the 37°? Did you find it better than your compression fittings you used on the hydraulic and brake lines?
@ MrBigSRT thanks. I already owned the flaring tool after doing the complete brake systems on a few projects. I was about to do the complete fuel system on my 67 F100. Which had a lot of connections (tank,fuel filter,fuel rails and so on) so I got the 37 degree die kit for more direct connection. The only time I ever used one of those compression fittings was on a transmission line. But it worked really well. Hope this answers question.
The compression fittings are bulky. The #37 fittings look more professional imo but take alittle more time to make.
@Wrench Aholic I agree. Definitely was one of my deciding factors. It makes for a clean looking install
thanks
@e34boat88 thanks
Where did you get those dual clamps that bolt/hold the two fuel lines to the frame?
@theindicacharmer1001 they are 3/8” cable clamps bolted together. Link in the description
I got my 6an leaking on a steel fuel line. Is there a certain thing you have to do besides crank the fitting tight?
@ Brookb0i832 that should be it
What brand fittings did you use here Greg?
Great video BTW!!
@jwa718Delete? Thanks. I got them off of eBay a long time ago . Couldn’t find a link for you. I believe they say XRP on them. Good luck
Thks for the video i like the 37° flare ill buy a tool do you have any suggestions thks
@PeterHatch-mx7zc thanks. I used the Eastwood brand. I have a link in the description. But there are others available
@@midlifecustoms thks
Where do you buy the fittings and hard lines? I want to make my own transmission cooler lines
@salxo9600 I believe I bought them off of eBay and Amazon
3rd time i fail asleep guy. Gonna try whisper here at home and my job. 😂
Will this work on high pressure system hard lines? Like power steering
@Jason Rivero good question. I don’t know. You should ask the company you decide to buy from before buying them.
Can you use this hard line ends for brake booster or vacuum ❓
@marineyacht I am not sure. You should check with the company you get them from.
Also, is that a double flare on the fitting or regular? What type of flare do you need for those AN fittings?
@theindicacharmer1001 It is a 37 degree flare. I believe it is just single
Thank you for the help! This video actually taught me a lot about AN fittings!
Do you need to flare the line if you're using the compression fittings? We don't get 37 degree flare tools in the UK. Very annoying.
@Night Nomad the line does not need to be flared for the compression fittings.
Can you post links to all things used in the video plz and thank you
@Ezeqkro I will look into doing that. But it won’t be for quite a while 👍🏻
Do you NEED to make the flare on the hard line in order for the fitting to stay on?
@naacho2252 not for the compression fittings
So I have the same fitting and didn't think that could hold fuel. So can I simply tap in on the hard line and cut off beyond the leak. ?
What is the name of the black compression fitting?
@DAP when I was doing that project I searched 6AN hardline/fuel line compression fitting.
Curious what the best practices are for fuel line material. Can you use a aluminum tube sleeve on a stainless steel line?
I bought stainless steel sleeves, but aluminum nuts since I’m joining them with an aluminum fitting. Will that be ok?
@Not_Bill_Nye honestly I am not sure. If you are able to, ask the manufacturers you got them from. Good luck
What’s the fitting for the fuel folter
@arungeorge7986 I am not quite sure which fitting you are asking about. But I used a double male 6an fitting to connect the line to the filter
Couldn't this also be done for coolant lines? Coming off the firewall from the heater core.
@Joshua Juno I don’t know. You should ask the company you purchase them from
Are these fittings suitable for power steering high pressure lines?
@matthewbentley2308 I am not sure. If you are able to, ask the manufacturers you are going to get them from. Good luck
would those compression fittings work on a steel hardline? (not stainless) cool vid!
@BadassValentine thanks. I believe the transmission line I used it on was steel. It has been quite a while can’t quite remember though lol
Transmission lines are steel from the factory. I worked as an ASE Master Tech since 78 at the dealer. Lord knows I have seen plenty. If you are working with aluminum, double and triple check wall thickness. My only reason for this is regular aluminum tubing has one rating, compared to A/C lines on a vehicle. The tubing used in HVAC has to expand and contract, not only for temperatures but pressures. A high side A/C can see 400 PSI and even R134a is considered less environmental to green house gasses than gas or regular hydrocarbons. It is at 10,000 feet these chemicals react to sunlight and creates smog. The upper atmosphere is that 8 - 12 miles for ozone. At 20 miles, you are in space. It is a strange combination of lower pressures, no clouds to affect smog, but the gases themselves chemically change. I don't care, but as an instructor for ACDelco on a Raytheon contract, we had to know this. I am off most likely as it's been awhile. Retired now and glad to be off the road as you don't even look at people now. But 7 states and 243 days per year in a hotel to hold 4hr tech seminars will wear you down on salary, not by the hour. Plus 3 bosses then come home to the Mrs.
Hope you check things close as I found "NiCop" brake line for sale that did not meet DOT / ASTM standards for wall thickness. No burst or max PSI listed either. 67 C10 for me keeps me at home! Best of luck.😮😅
@deankay4434 very impressive comment. Thanks for sharing
What size are the an fitting on the hard line?
@Denisovan Hybrid I used 6an fittings
Thank you! Awesome video, liked and sub’d helping out a fellow UA-cam channel 🤙🏼
@ANDERZEN thanks so much for the support. That is awesome!
So I blew a head gasket and did not have money to fix nor replace my car so I use some Blue devil and while wrapping everything up and fixing the coolant I cracked my radiator and now I'm trying to replace my radiator it's 4:00 in the morning and about an hour ago I realized that there is no way I'm getting one of these transmission lines off it seized I tried heat I tried everything I could to get it off and I see it's just twisting the fuck out of the transmission line so I'm going to cut that thing off use a compression fitting only problem is I got to wait till the morning till O'Reilly's opens up and do it all before 12:00noon so I can get to work on time lol wish me luck
@m16fermy good luck
Whats a coyote fund?
@duanecrowley9820 it is kind of a joke. It is a fund to put a Coyote engine in my 67 f100 truck. 😂
Will this work on a heater core?
@Damien Mikkelsen I am not sure about that. You should ask the company you purchase them from
@@midlifecustoms ha! Their clueless
Will these work for ac
@Miles Watkins sorry but I am not sure about that. I don’t think they will. But you can check with the company you get them from
Give me that skill!! plz
😂
..or your 90 can be a street 90 with a male and female.
ASMR. Everyone uses the cutter but never grinds off the work hardened portion before flaring. Dumb.
dang i cant find those kind of fittings online
@CasualPlayer sorry to hear that.