Aeroflow Aluminium & Stainless Hardline Series Hose Installation
Вставка
- Опубліковано 7 лют 2017
- Watch as Ryan from Aeroflow Performance show you how to properly install Aeroflow's Aluminium & Stainless Hardline Series Series Hose & Fittings.
- Авто та транспорт
Really appreciate this quick and straightforward answer to "what's the difference between a tube nut and an AN-hardline adapter?" Answer = one does the flare for you.
Fortunately most men have good experience with the straightening process.
Awesome, awesome video thank you
No reply to questions! Yeah, I want your product. Great customer support!
Is one better with hi PSI?
Wich one is more safety?
Can you use aluminum fittings in stainless steel lines? I couldn’t tell which hardliners you were using in this video. Thanks!
Yes that's no problem
what happens if you don't lube the threads before mating the tightening the adapters?
Nothing really. It's just to protect the threads and make the threads engage a bit more smoothly.
Hellow how are you ? Any cuestion what is name the product for seal the thread please and tanks
If you put a wrench to it, will the fitting spin on the hardline? I was just installing one and even though with a wrench could turn it, the fitting broke from being overtightened
Hi Steven, the hardline fittings crush down on the brass olive so once it is tight you can leave it. They are aluminium fittings with a taper so there is no need to over-tighten.
@@aeroflowperformance one the fitting tightened correctly. Can it still rotate on the hardline?
@@bradleygordon6806 i dont think so
What size tubing and fitting were you just using? I got a engine oil line with a 5/8 fitting to the engine and the other sides are leaking crimps what size an compression fitting would I use?
Part number AF109-10 suits a 5/8 tube and converts to -10 AN female or AF108-10 is the male version
Can you use this hard lines fittings to adapt into brake booster vacuum line❓
If the booster line is a hard line then yes!
I’m more interested in the flaring tool he used. Anyone know what it is and where to get one?
Hi There, you can find it here! www.aeroflowperformance.com/af98-2007-flare-tool-37-deg-an-angle
What is the max psi on these
Where could one buy a flailing tool like that please
We have a couple of options on our website: aeroflowperformance.com/catalogsearch/result/?q=flare+tool
Can you use a the tube nuts on a OE hardline that isn’t stainless or aluminium?
Yes you can, as long as the diameter is correct
@@aeroflowperformance so if the OD IS 3/8 I can use a -8 ? Thank you
@@kat5232 generally a 3/8 line is -6
@@aeroflowperformance sorry my mistake
Where do I buy them kit! Thks
aeroflowperformance.com/
Which of the two methods do you recommend more?
It depends on what tools you have and the application. If you have a tube flaring tool then the tube nut method is more secure in high pressure situations however if you don't want to invest in the tooling the adapters are very easy and convenient. They are also fine for most regular automotive applications.
@@aeroflowperformance ok thank you very much for the information I will think about what would be the best option since I only need it for a maximum fuel line of 70 psi and at full it is not a lot of pressure
The Adapters will be fine@@javieramaro7552
Part numbers would have also been helpful.
What if it has a small lip
You need to remove the lip before using these adapters