Це відео не доступне.
Перепрошуємо.
2005 F250 Double DIN Stereo + Rearview Camera Full Install | Tow Vehicle Upgrades
Вставка
- Опубліковано 20 бер 2020
- We're stuck at home under a shelter in place ordinance, so we went ahead and did a few more upgrades to our 6.0 Super Duty. We are hoping to get a few more years out of this thing before we upgrade, so I wanted to make sure the wife is comfy since this is also her daily driver. Lots of other fun stuff over on our blog (whyweworkchanne...) -- we'll see you on the next adventure! #WhyWeWork
Parts I used:
Pioneer Stereo amzn.to/3di5QYo
Pioneer Wiring Harness amzn.to/394AuBe
Stereo Mounting Bracket amzn.to/2Ut7Ioy
License Plate Camera amzn.to/2Uv0wIw
AV Extension Cord amzn.to/2UpG5gd
0▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►►SUPPORT #WhyWeWork ON AMAZON◄◄◄
►amzn.to/30tMCHX
►►►REP THE MERCH ◄◄◄
►bit.ly/2TTTeQ9
►►►ESSENTIAL/RECOMMENDED RV GEAR ◄◄◄
►bit.ly/36kXKcK
►►►WHERE YOU CAN FIND US ◄◄◄
►Website: bit.ly/36gNu5r
►Facebook: bit.ly/38tbBPN
►Instagram: bit.ly/2GdxPJp
►UA-cam: bit.ly/2TMK085
►Email: whyweworkchannel@gmail.com
►►►MUSIC CREDITS ◄◄◄
►www.epidemicso...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
As an Amazon Associate we earn from qualifying purchases, which means we receive a small commission from sales of certain items, but the price is the same for you!
I installed a similar unit a year ago. I love the backup camera. It makes hitching up the trailer so much easier. I think you are going to love it as well. Great video!
That was my thought as well. That way I can hook everything up by myself without getting out to double check. Te main thing she wanted was the Bluetooth, but that will be a nice luxury item and it was pretty cheap on Amazon. The radio seems to give us a lot nicer sound on the stock speakers too, so we're excited. Now if I could only hit a lotto so I could get the body work and interior redone, we'd be in heaven! Would also like to take it back to stock height and wheels/tires. Previous owner had the lift on, but I don't want to spend the $$ going back to stock yet.
Camera may not be popping on from the speaker because the speaker works off the proximity sensor on the bumper. So if you back up close to something your camera will probably pop on.
So we just did this to our 2012 F250 Super Duty. We're about to do the camera install because the receiver we bought wouldn't work with the factory Ford backup camera. Go figure. We bought everything from Best Buy and were going to have them install but their guys were on furlough, so we just figured it out ourselves. They told us the wiring harness we needed but we also bought this Maestro steering wheel control interface for our model (that they sold also). Here's a link to the Maestro brand that we bought (at the bottom). This isn't the one for our model, but you should be able to search for your model and get what you need to retain your steering wheel controls. It was very easy and we just tucked it behind the receiver with all the other wires. It's not too big. You do have to hook it up to a computer to program it to your specific model. That's where you can tell it that you want this button to do this or that, or just keep it the way it's always been. Kind of neat to be able to customize the buttons. You can either use the website to program the module or download their software onto your computer to program it (which I had to do because my computer would not go to their website or something - can't remember). We tried to buy an adapter to just use our current camera plug from the F250 (called a fakra) into the RCA on the back of the receiver with no luck. smile.amazon.com/gp/product/B075WGW9C4/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
So now I guess we'll just have to go with the license plate backup camera. Boo.
Steering wheel interface module link:
www.carid.com/maestro/sw-analog-steering-wheel-control-interface.html?offermpnid=4568838107&view=898679&gclid=Cj0KCQjwo6D4BRDgARIsAA6uN1_0RTETaKxtK1MA9yZS3YFVL_mFdkjnbwEJuV5SctlEbOuw5OZ5B3oaArJhEALw_wcB
You're a professional installer, continue the great work, Thank you for the content
Need a axxes adapter to maintain steering wheel controls
Thank you for the vid. I will be doing this on my sons 06 and I wanted to see what it was like behind the dash surround. However, not a fan of you running the backup camera wires running through the spare tire jack handle hole in the bumper. Could have just as easily ran it and protected it better having it behind the license plate. Your electrical tape glob and cutting and twisting of the taillight wiring had me cringe. Only a matter of time for those connections to fail. The reverse camera would work like it should if you tied it into the actual reverse light positive wire and not in the proximity speaker. The way you have it wired now, the backup camera would come on automatically only when the proximity speaker is audible.
You have to get a maestro converter to get the steering wheel controls to work
You got the part number for the wiring harness for the steering controls?
Thanks for your video..
All I had to do is tie the reverse camera to the rear reverse lamp wire
Did you try swapping the wires on the reverse light trigger wire? And I would put the mic on the plastic trim for the a-pillar not on the visor. I did the same head unit and install in my old 6.0. Its a very nice upgrade.
I went in and tightened up my connection and it started coming on when I get it in reverse now. I might move the mic over as well--I was worried about it not picking up from over there, but it seems to be plenty loud so that is a better spot. Thanks!!
It's been over a year now, how is the pioneer system holding up?
Your pedal adjustment switch button on your truck. Have you had any problems with that?
Mine don't work at all. No noise. No movement. Nothing!! Fuse check out good. 🤷♂️
on my 04 expedition the plastic gear was worn out.
Very useful vid
🙏
I hooked my camera into the backup lights and the camera comes on automatically. My F150 harness let me still use the steering wheel controls. Sorry I can't help with your situation.
That's ok. I tightened up that purple wire and it comes on when I hit reverse now. I'm not too worried about the steering wheel controls since it is mainly just volume and we only really listen to 1-2 stations lol
One question. I bought the Boss, BVN9384RC. I’m wondering if I have to leave the stereo face plate that goes around the front (off) in order to fit into the kit holder.
I just had to modify mine a bit but I still needed the plate.
Just got the kit to install in my 2005 f250. Gonna work on it Saturday. Any more tips?
No, it was actually pretty easy! I think I could have probably hooked up to the reverse wire at the back of the radio instead of splicing in to the taillight, but you’re right there anyway doing the license plate frame so you don’t really save much. Good luck!!!
Think this will fit in my 2010 f250?
What about the steering wheel control wires
I don’t feel like doing this myself. Do anyone know how much this will run me?
Did you ground the parking break wire to the ground on the wiring harness and then not use the other ground wire?
Did you think of taking the vent screw out and just putting it together
Ths music is incedibly distracting!
I don’t understand why folk don’t care to at least vacuum the car or truck before shooting an install vid, what the hell? Also, all that time and money and the head unit is installed with black electrical tape? Butt-end connectors are iffy, tape is junk…. Solder your wires and finish with shrink tube for a more pro install, just say’n….🇺🇸
They just don't care. Slobs that don't know what they are doing. Probably don't even wipe their own ass.
One more thing....my installation involved a lot more swear words that yours did.
Oh, believe me--there's a lot of cuss words on the cutting room floor LOL
Look at this video for the back up camera to come up automatically. ua-cam.com/video/OhiEivXxhc4/v-deo.html
Yay, thanks so much 🙏🤪
11:24 🚶🏿♂️