WORKED GREAT! THX MUCH! I had to work a but to get that plastic piece (steel cable link end) off, and reamed it 1/64 larger. I don't think mentioned in the vid - this reaming s/b 1/2" (on mine) deep, so it still functions as intended. Other than that, EXCELLENT fix. Only cost me the $4 for the cable nipple.
So you need to have spare length on the cable to use this method right? Otherwise one cable is now shorter than the other one and the switch may not reach it target tie in point anymore.
Great fix not quite as easy as it looks. Especially getting the swage on the pin not to pull trough. If all possible, go for it. Everything in a Camry just un bolts and just goes off and back on in sequence with a repeatable outcome, and IMHO it is easier to do the job correctly just because that's the kind of person you are.... Arrrrrh!
legitimate question to that misleading video. If you waist your time following it, making cable shorter, trunk will open right after you get on a first bump while driving, Cable is made by manufacturer on exact length, if it brakes - you are done. Only way to fix is to change entire cable and not manipulating like that inventor does.
@@jerrivil😢not true. It's like a bike brake cable. The length can be variable. As long as the plastic connector is in it's fixed position, and there is enough inner cable, it works. Ask any bike repair shop. Moore diy on my channel.
No lo sé Rick, parece falso. Al cortar el cable se disminuyó el recorrido, por ende abriría abrir al mínimo recorrido. Pero bueno, al parecer solo al parecer funcionó.
8pcs 5x8mm Solderless Cable end link 5mm: s.click.aliexpress.com/e/_DkcK2Ez
M
Ll)
What about the plastic piece?
Can’t find it!
What is the plastic piece boss?
HI, where do I get the plastic end tip that you glue to the cable?
Muy constructiva información!!.... gracias desde República Dominicana.
Thanks
Good cheap fix- thanks for sharing this!
Glad to help
Thank you, you are an artist
Thanks for watching
Please, send me the link for that plastic white part you used, I'm not able to find it anywhere!
Thank you in advance
Thanks for going straight to thw point.
Thank you for sharing knowledge
My pleasure, thanks brother
Thank you so much.. 🌹
But if the cable is totally out
How can apply new cable?
WORKED GREAT! THX MUCH! I had to work a but to get that plastic piece (steel cable link end) off, and reamed it 1/64 larger. I don't think mentioned in the vid - this reaming s/b 1/2" (on mine) deep, so it still functions as intended. Other than that, EXCELLENT fix. Only cost me the $4 for the cable nipple.
Glad you save money and fixed it
Where can i get the cable nipple?
Patrice T. wants me to thank you very much for this one!!!
God bless you brother 🙌 thank you so much. Have a good day ^-^
Thanks brother
@@AliMECH you're are welcome 🙌
genius, mate
Good one brother.. nice cable repair job
Thanks brother
Just I saw your video photo and I press the trunk button and the trunk closed now❤
Very good... Idea..
Many many thanks
Thanks for video
Just updated your video description camry trunk opening not opining😂
Great video. Thanks for sharing!
thanks for watching
What is the name of the replacement that you name plastic head? I need that part in order to complete my repair. Thank you for your excellent video.
Thanks, cable link end, steel cable link end
Where can you buy the plastic piece that the wire runs through?
thank you it worked 👍
Glad it helped
Wow a simple diy, cost big going to the workshop. If only I have time and the tools you have.
Thanks 👍
Thank you God bless you
You are so welcome!
Great repair...
Thanks
Thanks very helpful
Glad it helped
Thank you .
But if it's cutting from the trunk back what i will do
Hi what do you call that plastic lock?
Thank you god bless you
Thanks, you too
Bro, you're a damn hero.
Thanks brother
your the best!❤️
Thanks
Hi. Can you share a link to your toolbox?
Twas very helpful
Glad it was
Thank You AliMech
Anytime
Very helpful
Glad to hear that
Fantastic video
Thanks for watching
Haha dude you are amazing. Thanks a lot! 🎉💕
No problem, glad it was helpful
Which size that core? Were can I buy this?
Thx man.
Please I want to attach the plastic link to the confirmation
So you need to have spare length on the cable to use this method right? Otherwise one cable is now shorter than the other one and the switch may not reach it target tie in point anymore.
There is always some more length to cut, you only need 1.5-2 cm
@@AliMECH thanks for the info, it depends on the location of the cable break but I didn’t even know there’s a way to fix a cable like that
exactly
@@AliMECH sorry, the length is exact to open the trunk. if it would be made longer it wouldn't work.
Thank you 🙏
Thanks
Good job
Thanks
Where do I buy those end pieces
easier to use 5x8mm Solderless Cable end link 5mm: s.click.aliexpress.com/e/_DkcK2Ez
I have question if it's not the problem of what you put in your video what else could it be
This kind may help some car trunk but mine is to switch on to bonnet and touches on the switches. OR it is with the car key.. 🙏
Great fix not quite as easy as it looks. Especially getting the swage on the pin not to pull trough. If all possible, go for it. Everything in a Camry just un bolts and just goes off and back on in sequence with a repeatable outcome, and IMHO it is easier to do the job correctly just because that's the kind of person you are.... Arrrrrh!
Where do you find the part that secured the wire to the latch
That one is out of stock now, but I found this, and it doesn't need vase
s.click.aliexpress.com/e/_DkcK2Ez
@@AliMECHwhat's a vase?
I don't understand how cutting the black outer sheath of the cable will make the cable longer???
legitimate question to that misleading video. If you waist your time following it, making cable shorter, trunk will open right after you get on a first bump while driving, Cable is made by manufacturer on exact length, if it brakes - you are done. Only way to fix is to change entire cable and not manipulating like that inventor does.
@@jerrivil😢not true. It's like a bike brake cable. The length can be variable. As long as the plastic connector is in it's fixed position, and there is enough inner cable, it works.
Ask any bike repair shop.
Moore diy on my channel.
Sorry to sound thick-- but what's activator spray?
Yes it was
I think his question is what is it?
I cannot get the plastic piece off without destroying it. Where can I get a new plastic piece like you used. Thank you.
Please help!!
What did you end up doing?
I have the same problem. Did you figure it out?
did you figure it out?
where do you get the parts
easier to use 5x8mm Solderless Cable end link 5mm: s.click.aliexpress.com/e/_DkcK2Ez
I found one in Napa Auto, it is called cable stop
My man please i need help. How is the plastic head called? I can’t find it
Steel Cable Link End
Did you find this part? Having trouble finding it myself
@@StepdadRacing man never found it. I had to buy the whole thing. Really expensive. About 80 bucks
surely someone else has asked but what if it's more than that and not just the end 'ball'?
TK U
🙏
👍👍👍
No lo sé Rick, parece falso. Al cortar el cable se disminuyó el recorrido, por ende abriría abrir al mínimo recorrido. Pero bueno, al parecer solo al parecer funcionó.
👍
I would like to disconnect my trunk so if a theif comes he cant pop it open without the key 😅
My issue was in the trunk.
Great, did u fix it?
@@AliMECH Yes, 9 years ago!
Mine is too. Haven’t fixed it
Are you from Kurdistan?
Yes Stephen ✌️
Bro that shit broke off
Thanks for this video! Do you have a link to the plastic connector piece?
I don't have the link now, the old link is not available anymore, is yours broken?
My plastic connector is broken, would you have any link to it ? That’s all I need
@@KhanstaXDi need a new one too!please send link 🙏
Thanks!
Thank you very much for the support, appreciate that