Okay, the screw drivers works okay what i used was a wrench for removing grinder pads, hammered it into the slot and hit the hammer sideways until it broke loose, a piece of 1/4 in flat bar will work as well. This way does not tear up your screw head and is way easier to get off.
Anyone ever wonder why flathead screw drivers are square shaped like they are??? It's so you can put a wrench on them, not smack them with a hammer. lol
it is not quite tight.. it is properly tight. and it is very wrong to use hammer for loosing bolt.. you are distroying your bolt .. I am probably half your age and i already know about it. This is the worst example you could ever give people.
I don't understand why, but even just barely tightening that screw it's tighter than shit the next time you take it off. Flat heads always pull out of the slot easily anyways. They suck.
Okay, the screw drivers works okay what i used was a wrench for removing grinder pads, hammered it into the slot and hit the hammer sideways until it broke loose, a piece of 1/4 in flat bar will work as well. This way does not tear up your screw head and is way easier to get off.
Is there a video on changing the out drive oil? This looks like the generation that I have
Use a 15mm socket not a screw driver and a hammer
Anyone ever wonder why flathead screw drivers are square shaped like they are??? It's so you can put a wrench on them, not smack them with a hammer. lol
Sorry, if it's not on our UA-cam channel then I'm afraid not.
I wouldn't let you service shit on that basis. It had water in it after you changed the oil ?
Change that oil
That oil needs to be changed! It should not be white!
it is not quite tight.. it is properly tight. and it is very wrong to use hammer for loosing bolt.. you are distroying your bolt .. I am probably half your age and i already know about it. This is the worst example you could ever give people.
I couldn't make out anything he said in the whole second half. Too much background noise!
Impact screw driver from most Auto parts stores
I don't understand why, but even just barely tightening that screw it's tighter than shit the next time you take it off. Flat heads always pull out of the slot easily anyways. They suck.
What a shame to make a video like this
!using a screwdriver like that! what a hack!
totally agree with you what a butcher