Dream Garage Total Cost Breakdown - How Much Was Our 28x36x12 Post Frame Shop?

Поділитися
Вставка
  • Опубліковано 24 лис 2024

КОМЕНТАРІ • 177

  • @AustinRadio
    @AustinRadio Рік тому +123

    $22,500 was the total for everything and just for concrete and frame was $11,300 not a bad set up

    • @eenix0
      @eenix0 Рік тому

      That's amazing!!! Gives me hope for my project, mines a lot smaller (trying to create enough space for a 21ft Winnebago and all of my tools lol), but I had budgeted 30k. (I'm in Indiana). Thanks so much for the tips, I'm absolutely going to follow your advice!

    • @Streetstories_
      @Streetstories_ 11 місяців тому

      Outstanding

    • @gulopac1
      @gulopac1 10 місяців тому +1

      Keep in mind that he doesn't add the labor cost. Here, the labor will be easy another $20,000

    • @justapersonwithnoshadow
      @justapersonwithnoshadow 6 місяців тому +1

      Did he buy the land or was it just the build? I jus wanna cut to the chase

  • @watershedoverlook
    @watershedoverlook 2 роки тому +24

    I like your logic and your process. A really nice building that will serve you well for years. Nice job Lucas. 👍👍

  • @radoslavtomov9121
    @radoslavtomov9121 Рік тому +4

    This is how dream garage is supposed to be build. May you enjoy it for many years :)

  • @jayworkman2308
    @jayworkman2308 Рік тому +2

    Nice shop. I'm not far from you and was fortunate to find someone selling 2.75" thick foam board that came off a roof at Marathon. Got enough to do a 30x48 pole barn for a few hundred dollars.

  • @OrangeismyNewGreen
    @OrangeismyNewGreen 2 роки тому +4

    That’s a great deal for the size shop, you saved a lot of 💵 by doing the work yourself with Cameron👍🏻. Have a great weekend Lucas 🙂🙋🏼‍♂️👍🏻

  • @PineyGroveHomestead
    @PineyGroveHomestead 2 роки тому +8

    Having had a couple of buildings built in the same timeframe as you, Lucas, I can say you got a DEAL!! Awesome how you and your son put in the effort to be able to have the shop of your dreams. Now clean up that floor!!! 🤣😂🤣

  • @MTXSHO9732vV8SHO
    @MTXSHO9732vV8SHO 5 місяців тому +1

    Fantastic.. Over the years this will certainly pay for itself and probably 10x more "comfortable" than my 2 car garage with the HOA hovering over me. I have to limit my projects to things that can be finished in one or two days time. Looks like you could do a full, custom build from the frame up and work as late as you want into the night. I've been 100x worse off than what you're doing right there because the work absolutely had to get done. I really hope you're enjoying and do some great projects there.

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  4 місяці тому +1

      Thanks! Yeah, I couldn’t handle someone telling me what I can and can’t work on. We make some noise around our place! 😂

    • @MTXSHO9732vV8SHO
      @MTXSHO9732vV8SHO 4 місяці тому

      @@PeeksPeakHobbyHomestead Eh... It is what it is you know.. I should say I can't own 4 cars and take on extended projects.

  • @markvelarde321
    @markvelarde321 Рік тому +3

    Great job sir. Sweat equity provides so much satisfaction for you and your family. I hope you all enjoy your shop for many years.

  • @MAroughTop
    @MAroughTop 2 роки тому +5

    Hats off to you for your ingenuity and drive. Congratulations for all you've accomplished on a very modest budget...I enjoy your channel and homestead videos...all the best to you and your family...Happy Holidays.

  • @Bradkate69
    @Bradkate69 Рік тому +1

    Thanks for the video! I’m starting a 28x36x10 now. Southern Indiana here.

  • @earlyriser8998
    @earlyriser8998 2 роки тому +5

    just built a metal building 40x60 which we hired out...in our late 60's ...not as much we do ourselves in these trades anymore
    Cost 5 times your cost with posh epoxy floor and lift pads but no lift yet. Insulated with vinyl bags full of pink insulation. We also installed 11 6x3 windows to enjoy the light and the views of the farm. 2 larger 10 x 12 doors with power operators and remote controls. Finally 3 large LED lamps make the place like daylight even at night. Bigger budget so more toys.

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  2 роки тому

      Sounds amazing! Awesome size and the windows and bigger doors would be great! Congratulations!

  • @jamesharless5357
    @jamesharless5357 2 роки тому +4

    You did real good on the price, very nice garage. Another great video!👍🏻👍🏻

  • @tonyp9609
    @tonyp9609 9 місяців тому

    Thank you for your great videos. That garage wouldn't be allowed in Massachusetts, unfortunately. To build something that size would cost me over 150,000. Enjoy your great garage.

  • @wmsterlingwright
    @wmsterlingwright Рік тому +1

    Thanks for the video. I'm about to build a 30x40 with a lift myself and this helps.

  • @benhaze1010
    @benhaze1010 Рік тому

    Now I just need to find a large property to build a similar dream garage. :) Thanks for sharing your experience!

  • @CALB2009
    @CALB2009 Рік тому +2

    WOW!!! What an awesome deal!! Thanks for sharing all of your tips and sources to help save money on the build! ~Christy~

  • @paintbooths87
    @paintbooths87 9 місяців тому +1

    Automotive lifts are required to be able to safely operate picking up 25% more than they are actually rated. So to get an 11,000 lb capacity rating requires actual lifting capacity of 13,750 lbs.
    (7,000 lb rated: will lift 8,750 lbs;
    9,000 rated: will lift 11,250 lbs)
    I have installed hundreds of lifts of all types. Rotary, Challenger, Gilbarco, Ben Pearson, etc. 4 inches of reinforced concrete, ¾" anchor bolts, holes drilled all the way through, never had an issue.

  • @doug2078
    @doug2078 Рік тому +2

    Beautiful Garage ! Great job !! Awesome price !!

  • @tarheelgarden
    @tarheelgarden Рік тому +1

    great info! I"m looking to build a shop for my business and this first hand experience is priceless. thanks!

    • @allindafac3
      @allindafac3 Рік тому

      Im planning the Same do you plan on doing it on private property or comercial ?

  • @AmericanSavageGarage-em2oy
    @AmericanSavageGarage-em2oy 10 місяців тому

    Thisis excellent. We learn from our mistakes. Fabulous vids on this build.

  • @MJADoingStuff
    @MJADoingStuff Рік тому +2

    Man Lucas you saved so much money on the shop by putting in the hard work. 😁👍Great job!!!🚜💨Merry Christmas!!!🎄

  • @roadglide1142
    @roadglide1142 2 роки тому +2

    Congrats 🎈🎉🍾! I absolutely luv it! I want to do the same myself!

  • @robertlaird6746
    @robertlaird6746 10 місяців тому +1

    Did you put the post in the ground or did you put a galvanized metal bracket on top of the concrete and then bolt in your post? There is a big difference between a pole barn and a post frame constructed building. One last for about 40 years and the other last generations.

  • @brantlers
    @brantlers Рік тому +1

    Appreciate this helpful video! You might try getting some floor leveler for the low spots if they bother you.

  • @jakeMTSU
    @jakeMTSU Рік тому

    I know for a fact.. my new f350 weights 8400 with 2 men sitting it .. your good to go with 11k lift, nice shop brother.

  • @roadtrekralph311
    @roadtrekralph311 11 місяців тому +1

    good video. I was looking at building a 30X40 but I just might go with 28X36.

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  11 місяців тому +1

      I’m very happy with ours. Sure bigger would be nice, but this works well for three bays and plenty deep enough for mechanic work.

  • @SeanReifschneider
    @SeanReifschneider Рік тому +1

    I'm on my third replacement of Barrina lights over ~3 years. I will say that Barrina has sent replacements under warranty, but at this point I pretty much always have a few burned out. My plan is to replace them with just LED strip lights hooked up to some power supplies in the future.

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому

      I have a dozen in my barn and I think I’ve had 2 burn out in 3 years. They are cheap, but hit or miss on quality I guess…

    • @SeanReifschneider
      @SeanReifschneider Рік тому

      @@PeeksPeakHobbyHomestead I had hoped that the first batch I got was just a bad batch, but when the replacements started failing I lost hope. I currently have 4 out of 12 burned out, I purchased them in Feb 2020, so 3 years, I think all of them have failed at least once. But, barrina did stand behind them and send replacements.

    • @spevakdesigns
      @spevakdesigns Рік тому

      They may have some bad and some good models. I've had one set for about 3 years that are now in my girlfriend's metal foundry shop and all 12 work fine. I have another 15 in my shop that are about a year old and also fine. All of them have been infrequently exposed to high humidity and temps between 20 and 150 degrees F. Haven't had a single one fail. All two bulb units with 120v plugs and wrap around housings.

  • @Atlas.X9X
    @Atlas.X9X Рік тому +1

    Thanks for sharing this info. Awesome garage!

  • @JB-mf1zc
    @JB-mf1zc 2 роки тому +1

    Mighty fine shop!! God Bless!!

  • @fredstriker2042
    @fredstriker2042 Рік тому +1

    You rock brother! Greatly appreciated!!!

  • @PhanoftheShow
    @PhanoftheShow Рік тому

    thanks for sharing this. i’d be proud of that garage

  • @raphaelroberson1129
    @raphaelroberson1129 Рік тому

    Really appreciate the information.
    I intend to do a build for outside Commercial kitchen for vending services.

  • @TomsBackyardWorkshop
    @TomsBackyardWorkshop Рік тому +2

    I at 20k for just the structure, no concrete or anything for a structure that's about the same size here in CA. It does have to withstand 100mph winds and the occasional earthquake but it comes with professional installation. The concrete was poured a couple of weeks ago still waiting on install.

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому

      Sounds like a pretty good deal. I hope mine never has to face 100mph winds or an earthquake. 👍 Enjoy your new building!

    • @TomsBackyardWorkshop
      @TomsBackyardWorkshop Рік тому +1

      @DXEDGE12 International steel structures. I made a video of the install it will be posted on my channel soon.

    • @DXEDGE12
      @DXEDGE12 Рік тому

      @Toms Backyard Workshop thanls for the response. I will be following your channel.

    • @TomsBackyardWorkshop
      @TomsBackyardWorkshop Рік тому +1

      @@DXEDGE12 The workshop build video has been uploaded.

  • @abidmehmood3631
    @abidmehmood3631 3 місяці тому

    Hi man, this looks awesome. Did you buy your blue print online? Any recommendations for site plan?

  • @CraigFulton
    @CraigFulton Рік тому

    A bit surprised you were nervous of a lift but went with that Triumph after all that concrete work. I went with Bendpak in the end but looked at those Triumphs for months.

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому

      I went with the 11k and it seems as solid as could be. We use it a lot and haven’t had any issues. If budget allowed, I would love a Bendpak for sure.

    • @CraigFulton
      @CraigFulton Рік тому

      @@PeeksPeakHobbyHomestead that’s great to hear! When I was looking at them in in 2019 they could be had for $1800! I really wanted to do it but I got the BendPak Grandprix for $2300. The price is ridiculous now.

  • @keithwiebe1787
    @keithwiebe1787 Рік тому +1

    You're getting really good deals. 150 bucks for hard creek rock? I just signed an order today for limestone screenings for 225 (with tax) delivered for 14 ton. But creek rock around here would be round stone. Not good for under concrete I would think because it can't really be compacted. It just likes to roll. Correct me if I'm wrong.

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому

      You may be right depending on the mix, but this stuff has a mix size that really made it pack well. Then we went over that with limestone crusher run and it made a great base. I’ve been using the creek rock for driveway base under limestone and it works really well!

    • @keithwiebe1787
      @keithwiebe1787 Рік тому

      @@PeeksPeakHobbyHomestead I'd like some of that rock over limestone. Here, the limestone when dry acts like concrete but when wet is just a sticky mess. I'm going to spread some limestone this afternoon and wet it down and try to pack it.

  • @chikipichi5280
    @chikipichi5280 Рік тому +1

    Do you have a video on your annual income and how you finance the land you live in? I'm interested in how I should go about acquiring land with my 60k annual salary.

  • @DrHealthylLiving
    @DrHealthylLiving Рік тому

    Great information my friend, you did a great job, do you have a video putting everything together?

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому

      I have a Timelapse as well as an entire series showing each part of the build. Check out my Playlists for “Pole Barn Build”

  • @cornbobrimlove7892
    @cornbobrimlove7892 9 місяців тому

    Cool. You probably live close to my area. I live close to Wurtland. Nice building.

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  9 місяців тому

      Sure do! I actually lived right next to Wurtland Elementary for several years. I built that little garage right next to 23.

  • @theunknown302
    @theunknown302 5 місяців тому

    Hell yeah brother. Thanks for this video.

  • @nunyabusiness2294
    @nunyabusiness2294 9 місяців тому

    awesome setup!

  • @TripleTAcres
    @TripleTAcres 2 роки тому

    That’s a steal! Nice job!

  • @kristiwilliams4816
    @kristiwilliams4816 Рік тому

    Where are you in Kentucky? We are in Henderson! Looking for a kit now to build a garage!!

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому

      Yeah we are on the other end of the state. Near Ashland. I believe the lumber comes out of Indiana though. You might search for a Metal Supplier that uses Graber Post Company. That is where ours came from.

  • @jasondonnelly8940
    @jasondonnelly8940 Рік тому

    Outstanding!!

  • @JackieEvans-bn6ki
    @JackieEvans-bn6ki 10 місяців тому

    Good deal. I’m in Ky too?. Care to send me selling info where you got your doors?

  • @jakeMTSU
    @jakeMTSU Рік тому

    Never did a epoxy floor... we always sweep with a broom ... it makes a nice a non slip floor, not a "finish" you see allot but my dad did it and it worked for 40 years for him so I did it... it makes clean up a mother but its what i know lol...

  • @lifestylefit4success
    @lifestylefit4success 9 місяців тому

    Thanks, very informative 😊

  • @optionstrader9637
    @optionstrader9637 7 місяців тому

    Im having a 24x36x15 with an 8x24 loft and 2500 sqft of total concrete being poured the total price is $49,000. I generally build things myself but given the location and size of everything I decided it wasn't worth my attempt because it would take so long to complete.

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  7 місяців тому +1

      That seems like a pretty good price really. I’m like you, I don’t think I could build any higher than 12’. You’ll have a great building when that is complete!

    • @optionstrader9637
      @optionstrader9637 7 місяців тому

      @@PeeksPeakHobbyHomestead that's what I thought too and they source material with a local company as well so I'm all for that.

  • @waynemanning3262
    @waynemanning3262 Рік тому

    Nice job!

  • @Camo-Dan
    @Camo-Dan 9 місяців тому

    This is so awesome🤘

  • @thegiant573
    @thegiant573 Рік тому

    Do you have any plumbing in the garage? Hand washing station, toilet?

  • @FuturesTrader
    @FuturesTrader Рік тому

    Awesome thanks for sharing

  • @adrianjames4690
    @adrianjames4690 Рік тому

    Great can you post the links to the company that did your building

  • @CrazyCat229
    @CrazyCat229 Рік тому

    I see you are a man of taste. SUBARU WRC CARS!

  • @stoneyswolf
    @stoneyswolf Рік тому

    I wouldn't want spray on insulation. If you want to make changes later add windows do electrical work fix the building it's just a nightmare. Regular insulation you just pull it down and reuse it.

  • @adolpherazey4459
    @adolpherazey4459 2 роки тому

    Damn you did real good !!! 👍

  • @javiergonzalez-us5is
    @javiergonzalez-us5is Рік тому

    Would you share your plans?

  • @acollegekid
    @acollegekid Рік тому

    Have you seen prices come down any? Looking to do something similar near Knoxville

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому

      I believe prices are better than when they were at their worst. I don’t know if they are back down to what they were when I ordered mine…

  • @mattclark1278
    @mattclark1278 Рік тому

    Killer breakdown. Thanks! When I do one of these it's going to have a lift AND it needs a storage loft over one of the garage spaces. Did you consider doing on eof these to recapture some of that open-air ceiling space? Anything major to think about from a kit-buying standpoint?

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому +1

      I have thought about some loft type storage. I might add it one day. As far as the kit, my metal supply place made it effortless. 👊

  • @Camo-Dan
    @Camo-Dan 9 місяців тому

    Is this in North Carolina? What state? Just curious. Great content

  • @davidhair3595
    @davidhair3595 11 місяців тому

    Thank you !!

  • @TreaByrge
    @TreaByrge Рік тому

    Can you give a name and number to where you got your roll up doors?

  • @XaiVue
    @XaiVue Рік тому

    Wow I love it

  • @mattvelardes8072
    @mattvelardes8072 2 місяці тому

    How are the Pex airlines working out for you?

  • @JSZstudios
    @JSZstudios Рік тому

    How does the building breath without soffits? Condensation problems?

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому +1

      All of the ribs are open under that trim. No issues with ventilation…👍

    • @JSZstudios
      @JSZstudios Рік тому

      good to know. Thanks!@@PeeksPeakHobbyHomestead

  • @miraslauby
    @miraslauby Рік тому

    Thank you

  • @NFLHITMAN
    @NFLHITMAN 9 місяців тому

    Do you have a link to the garage buikd company you used?

  • @prestonschmidt3137
    @prestonschmidt3137 Рік тому

    Did the kit you bought include your trusses, or was that separate?

  • @FR11
    @FR11 Рік тому

    Cleetus fan .. SUBBED

  • @craigcaggiano431
    @craigcaggiano431 Рік тому

    Did you have it inspected along the way? Are there any fees associated with this building

  • @Officialbigdev
    @Officialbigdev 5 місяців тому

    Would you be so kind to send a copy of blueprint?

  • @nirniro1
    @nirniro1 Рік тому

    ❤❤❤

  • @jobisrael8313
    @jobisrael8313 Рік тому

    So 22.5K if someone take the same idea but change things around it will be a nice house

  • @johnmcneal9477
    @johnmcneal9477 4 місяці тому

    Less then $25 a sq ft. You cant beat that price.

  • @rickdavid1795
    @rickdavid1795 2 роки тому

    That’s hard to beat

  • @Bill_Scales
    @Bill_Scales 11 місяців тому

    What was the roof pitch?

  • @gulopac1
    @gulopac1 10 місяців тому

    Keep in mind that he doesn't add the labor cost. Here, the labor will be easy another $20,000, plus the tools and equipment you need to doit

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  10 місяців тому +2

      That’s true, but it was also the point. We did it all ourselves so I’m sharing what you can save if you can DIY the build. 👍

  • @rooster5755
    @rooster5755 Рік тому

    $750 total for wiring?i either call BS or something fishy going on.a 125ft roll of 6-3 wiring in itself costs $500-600 in WI. as of last year.10-3 wiring would still be around $250 for 125ft.. for welding.that was 5 years ago when i built my shop and did all the wring myself.either stuff in really cheap in KY or ? I guess i will compliment you on being resourceful its that good stuff aint cheap and cheap stuff aint good.more power to you but not even close to the way I like things but to each his own i guess....

    • @EAGLINWRX
      @EAGLINWRX 4 місяці тому

      He probably just ran Romex for all the lights and outlets and ran heavy cable where needed for bigger power draw.

  • @jodiplock4784
    @jodiplock4784 Рік тому

    👍🏼

  • @gdsstudio974
    @gdsstudio974 Рік тому

    Heated slab would not have cost all that much. At least start with installing the tubing and get the mechanicals later.

  • @junkcarz4720
    @junkcarz4720 Рік тому

    How much

  • @snort455
    @snort455 Рік тому

    Put another $150 with it, leave out the lift. 10’ not 12’ H. And I could build one here in California. It would take a year to get the permit. Also another $100k for fees and sprinkler system and government whoopee tax. 😢

  • @gregorymacneil2836
    @gregorymacneil2836 Рік тому

    I think you were very wise to get an engineered package. Doing otherwise is penny wise and pound foolish.

  • @dustup2249
    @dustup2249 4 місяці тому

    Weird. Those are the same dimensions as a she shed. Cute little man cave. Now you can build LEGOs and not have mom swear up a storm for stepping on one during the night.

  • @allynistubed
    @allynistubed Рік тому

    Wow! Only $22,000!

  • @HarriettArnold-ft6in
    @HarriettArnold-ft6in Рік тому

    Seems like you are spit on. We just put up a 30 x 50 for a shade over 20K bare bones with electricity. Still outfitting with benches cabinets etc…

  • @MRdownrising
    @MRdownrising Рік тому +1

    Ima just leave This if you can afford spray foam do it you will make your money back within 2 years

  • @appelkuk2756
    @appelkuk2756 Рік тому

    This is such a cheap way to build, in Sweden we do the concrete foundation waaaay thicker than you, deep corners! Wood straight down in the earth will just rot within 10 years. Big no. You need to have drainage around the building so water will always push away from the foundation. No wonder your houses collapse when a tornado hit I’m in shock by your building standards.

    • @silent1967
      @silent1967 11 місяців тому

      Well this isn't Sweden it's the US and Kentucky. Treated beems last way longer than 10 years. I have some in the ground ground for 20 years and they are still solid. Plus we have tornados that can rip up concrete and asphalt off a highway so the building would be gone anyway wouldn't it.

  • @truthbetold2914
    @truthbetold2914 Рік тому +1

    Why didn't you spend a little extra and get overhang all the way around. ..it looks like a cheap grab the money and run building

  • @glichonum1697
    @glichonum1697 Рік тому

    🤔🤙🏽🤙🏽🤙🏽😊hmm

  • @coloyikes
    @coloyikes Рік тому

    Just tell us what you built and how much it was to buld it WE dont cafe where you sourced your dam doors Byweeeeeeeeeeeeeeee

  • @mrsmith5114
    @mrsmith5114 4 місяці тому

    Steal of a price. Nice job. Load of work.

  • @KyleRattay
    @KyleRattay Рік тому

    Don’t do your own concrete!!! My footers in my garage are over 4/5 feet deep! High and low spots always occur. Cost in CA are ridiculous no apples to apples plus metal has no insulation factor better to stick build!

    • @PeeksPeakHobbyHomestead
      @PeeksPeakHobbyHomestead  Рік тому +2

      Oh I would absolutely do my own concrete again! The imperfections are minor compared to the savings of $6-8k. Now that the floor is in use we don’t notice a thing. Also, you can insulate a post frame building just the same as a stick built building. Everybody has to weigh their own factors though. No worries. 🤷🏼‍♂️

  • @greghess6077
    @greghess6077 Рік тому

    Great video
    Thanks for the info

  • @finessedyawife4915
    @finessedyawife4915 Рік тому

    That’s a real dream garage

  • @wilassguess
    @wilassguess 5 місяців тому

    NICE