How To Reset Change Engine Oil Message On 2011-2020 Jeep Grand Cherokee

[@Pabz2030]

And for those that this doesnt work on (Non USA Cars) do this....
Put into run mode (Press start twice without foot on brake)
Push down and hold down accelerator pedal for 35 seconds
While still holding down the acclerator fully depress and release the brake pedal 6 times
Release both brake and accelerator pedals
turn off ignition
wait 10 seconds.
turn on engine.
This is what cleared the oil change warning on my 2011 UK Spec Grand Cherokee overland 3.0 V6 CRD

[@c30xe]

Thank you!

[@outdooradamklan]

Thanks so much. This 35sec one worked.

[@Lakesailor]

I was sure you were pranking me! YOU WERE NOT! Thanks.

[@vinopod]

Very well explained, you're the man. Thanks

[@NoFro-TL]

You the man 💪🏽 worked for my 15 Cherokee

[@craigcoetzee3688]

This one worked I tried a few other ones before this wish I watched this video first.

[@debrobinson7634]

Thank you so much! My dealership didn't even know how to do it!!

[@degovida__914]

This works for my 2012 jeep compass as well. Thanks a bunch!

[@ski5150]

Yayyy!!! I don't even want to know how you figured this out! Never want to know a magician's secrets... hahaha...thank you

[@job38four10]

I'll try this on my 2018 Cherokee, I bought it used last year so this is the modern vehicle I ever owned and didn't know new cars had this feature. I changed oil twice so far and I was wondering how to get that message off, watching videos sometimes is easier then scrolling threw a complicated car manual..........

[@UnnecessaryComment.]

Thank you! Worked on Jeep Grand Cherokee 2011

[@houstonian713]

Dayum that was fast an easy bro.. thanks..💯💯💯💯💯

[@carriewoodruff4939]

Thank you 🙏🏻 it worked 😊 2019 Grand Cherokee

[@stevenshoemaker8326]

Worked like a charm on my 2015 grand Cherokee thank you so much!

[@8rmdgunmen]

I just did this on my 2010 grand Cherokee And it worked. Thanks for the info.

[@dannyrudoy]

Thank you! Worked on my grand Cherokee 2020

[@ericaslesen]

Super helpful! Works on 2015 Jeep Grand Cherokee Overland. Thanks!

[@privateweb3521]

Thank you The mechanic didn’t know how to cut the message light off so he told me to just drive for 30 minutes 🤦🏼‍♀️

[@Jezzroqe]

Hahahaha wtf !!!!!

[@oliviagary3747]

Thank you so much it worked 🥰🥰

[@dmitriyborodin3368]

Чувак! Ты красавчик, спасибо тебе!

[@alikaufman5989]

Thank you!!! That did the trick 👌🏼

[@Eltecate99]

It worked..thank you 😃😃😃

[@lormarc453]

Big help my man, thanks a lot!

[@stephaniewalt1258]

That worked! Thank you!

[@ayottegirl74]

Worked! Thank you!

[@rivera75nesto]

You are awesome 😎 Ty

[@niallmccabe4766]

You are a saint 👌

[@hosamel.sherbiny8982]

It worked .. thanks

[@DotimiEgbuson]

Yeah it worked.thanks man 👍

[@BigEasyPatriot]

Thanks man!

[@Gamingandlipstck]

Thank you it works!!!

[@RayKhuboni]

Hi Martin, I have two messages on display that pops up one is the park assist service and oil change due. The oil change is done and tried resetting it using the same process which clears for a while and comes back again.

[@patf4998]

Awesome! Thank you🤗

[@jimmyfrombrooklyn8550]

Thanks!

[@dcullins2967]

Hi Martin, thank you so much for the video it was great help!
I do have a request about my 2012 Jeep Grand Cherokee, the tailgate chrome bezel is starting to peal and I was wondering if you know how to take it off so I can replace it? Thanks Martin

[@10Flat]

I’ll give it a shot thx

[@lxaddictedxl9946]

can u show us how you change the oil for this car?

[@aidanryan5709]

Push all the way down on the Gas too. Took me a couple tries because I didn’t push all the way down

[@martindevries95]

It’s aswell for diesels? It doesn’t work on my 2012, 3.0CRD.

[@janospetroman3535]

Hi, I just din on my 2013 Grand Cherokee and is canceling the message but after few second is jumping back! Somebody has the same problem? Thanks a lot

[@ottoleisering7855]

Ditto! Thanks.

[@oliviagary3747]

Do you know where I can find a engine opener for a grand jeep Cherokee for a 2012 I need to fill my engine oil

[@nicknick6960]

Is that your original mirrors or u upgraded them? I intalled them on mine but the signals dont work or the blind spot because the sensor missing for that i guess. But does it need a code or flash for them to work

[@NoahFonoti]

I tried but didn't work on my grand cherokee 2011.. Any other tips pls

[@Pabz2030]

If you have a non-USA spec car...
Put into run mode (Press start twice without foot on brake)
Push down and hold down accelerator pedal for 35 seconds
While still holding down the acclerator fully depress and release the brake pedal 6 times
Release both brake and accelerator pedals
turn off ignition
wait 10 seconds.
turn on engine.
This is what cleared the oil change warning on my 2011 UK Spec Grand Cherokee overland 3.0 V6 CRD

[@salamalaseel561]

Thank you

[@VvegaA1987]

Do you need to have the start/stop engine button in order to do that or what

[@stevenshoemaker8326]

No, he said you can use a key to enter run mode as well. I would recommend checking the manual to see how to enter run mode with a key.

[@winnerkenny5965]

Worked ! :)

[@batoot2die100]

Does it work for engine light too?

[@MartinsUsedCarsCollectiblesLLC]

Unfortunately, no.

[@MiboSTI31]

How can I reset my tpms? The tires are new and all of them have the correct pressure but I can’t delete the light on the dashboard.

[@MartinsUsedCarsCollectiblesLLC]

The TPMS has to be rest by a mechanic with the proper code reader to program the signal to your car

[@MiboSTI31]

@@MartinsUsedCarsCollectiblesLLC thanks

[@seza1619]

Didn’t work! 😢 what could be wrong?

[@MartinsUsedCarsCollectiblesLLC]

Retrace your steps and try again with the video on at the same time.

[@seza1619]

@@MartinsUsedCarsCollectiblesLLC tried it several times. 3 people have tried it now and still not clearing it. Not sure why though

[@surfpub2001]

Weirdest design... thanks

[@zazakordzakhia5364]

thank you so much. it worked!

[@johnnybvera78]

It worked thanks brother

[@jessicaescobedo4589]

Dude thank u!!!

[@avery.norman426]

Helpful!