All About RUPES UNO PROTECT w/ Jason Rose | The BEST One-Step for Detailers who don't like AIO's!
Вставка
- Опубліковано 19 тра 2024
- Jason Rose of RUPES USA visits Levi in the studio to talk about the new UNO PROTECT one-step polish & sealant!
For many detailers, all-in-one type products can be a touchy subject because they've traditionally not offered much correction and tend to be loaded with fillers to disguise leftover imperfections. These frustrations are why Levi tends not to like AIO polishes very much, BUT, after using UNO PROTECT over the past few months, all of the complaints Levi would normally have about AIO's have been virtually eliminated. Between Jason & Levi, they'll be able to explain what makes UNO PROTECT different from the typical AIO.
#RUPES #RUPESUNO #UNOPROTECT #AIOpolish #OneStepPolish #RupesBigFoot #Detailing #DetailingChannel #TheRagCompany
Do you have a suggestion? Tell us about it in the comments!
►Subscribe to our MAIN channel here: bit.ly/3cSRixY
►Subscribe to our FAQ channel here: tinyurl.com/ycm3ctuk
►Subscribe to our PODCAST channel here: bit.ly/2WNs12i
Like us on Facebook: / theragcompany
Like our Podcast on Facebook: / theragcompanypodcast
Join our Facebook groups:
/ detalks
/ washwednesday
/ theragcompanypodcast
Follow us on Instagram:
/ theragcompany
/ theragcompanypodcast
Click here if you want to learn more about The Rag Company: www.TheRagCompany.com
The Rag Company is a worldwide provider of premium microfiber & auto detailing products for cars, trucks, SUVs, boats, aircraft and a whole lot more!
________________________________________________
SHOW INFO:
Hosts: Levi Gates, Jason Rose
Recorded by: Jimmy Wilkey, Nick Kovach
Edited by: Tim O'Brien
Content provided courtesy of The Rag Company ©2020 - Авто та транспорт
best analogy we use: we don't give you a steak if you've paid for a hot dog...but it'll be the best hot dog you've had
It's really good to see Jason he's such a wealth of knowledge in the industry. I can see how this product is for everyone, from the DYI/Enthusiast who has a DA in his hand for the first time, to the professional. As an enthusiast I as well have "Tunnel Car Wash" friends who want thier car to look nice.
Great video guys. I haven't tried this product yet but sounds like a great AIO. I'll be tring it soon. I always like listening to Jason. He's very knowledgeable. Trust him 100%. Levi you to. I've done paint enhancements and paint corrections for 40 yrs now but always learn something new everyday.
Love Jason Rose! Wealth of knowledge and he seems so humble
so good you mentioned that it works on wraps!! will need something to work with wraps
Saving this to my detailing favorites! I really like his informative skills! Great knowledge of this products/techniques
Last week I used Uno Protect on my 2004 Dodge Ram that I purchased new. So almost 20 years of hand washing, never a drive through car wash, and always it stays in a dark garage. And never anything for paint correction besides hand applied wax. First I stripped the wax with SD-20 degreaser, followed by Sprayway glass cleaner. Then I used a brand new Rupes yellow foam pad, even though I had the wool pad Jason used, and I quickly learned that 3 dots of product was always followed by a quick final spurt as I closed the top - it will squirt out as you close the top, so you may as well spray it on your pad. It came out awesome! And it was easier and quicker than the hand waxing I’ve been doing. I have the fixed rotation Rupes machine because I have a fiberglass trailer and fiberglass sports car, both gel coat, so I’ve been following the boat detailers and using their recommended products. This was my first time using the Rupes on clear coated paint and it was so easy, the next job will be my wife’s Rav4. Fun times!
awesome information...thank you much...love to learn from Jason...he gets right to the facts about products and how to use them! keep up with these informational (teaching) videos!! where was anthony? lol
That is one great product very happy with the results on every vehicle I used it on
Really like jason's advices. Hope you will do more video with him.😅
I’m a master Detailer and this guy is spot on. He actually isn’t describing it or showing you how good it is.
Buy now this is not a paid advertising but a master sharing his experience
Pretty impressive all in one.
Awesome video, thanks!
Jason rose speaks the real deal no bs like others online
Thank you you guys for the info
I would love to see how this would work with the Buff & Shine Uro-Fiber pads! With that pad having the two different types of microfibres, one for cutting and one for finishing, it would be interesting to see if you can get the best of both worlds with it and the Uno Protect.
Did you ever follow up on that? It’s an interesting concept, I’m building up my arsenal right now and looking get a polishing kit going so I’m picking up any tips and knowledge.
The combo in the this video seems great for a beginner like myself 🤘🏽
WHEN AND HOW WOULD YOU REAPPLY POSSIBLY ANOTHER POLISH?? NOT NECESSARILY AN( A.I.O).?? GREAT PRODUCT ; GREAT INFORMATION, THANK YOU, PATRICK.P
I’m a huge fan of Rupes products.
I bought an LHR15 MKIII 3 months ago.
Game changer for me.
Their polishers,pads and materials are the best by far.
My next purchase will be the 3 inch Bigfoot polisher.
After 39 years of detailing full time these Rupes products amaze me
That good....just got an ibrid nano.... it even feel quality in your hand before you've used it
LHR15 is next on the list
What do you do for combo for a One Stage and Two Stage
Sounds perfect for a Dealership!
Something I wonder about All-In-Ones/Cleaner wax: When you perform a traditional paint correction followed by a wax, paint sealant, or coating, you have to do an IPA wipe to take the oils from the polish off the panel, so that the paint protection can bond to virgin clear coat. With the Cleaner Waxes, that step is missing, so you question well how that protection is married to that clear coat.
I got to try this product!
I have a question for you guys does the new DA polish get effected with colder temperatures? Reason im asking is im currently doing a correction on Mercedes CLS 2018 model. Swirls are being corrected but the straight scratches are very hard to correct even after three seperate attempts! The temperature in the building is around 12 degrees. Any help be appreciated! Thanks
Hi nice video brother.but you didn't mention about durability and is it hydrophobic?
Nice video! Very usefull
How does this compare to CarPro Essence? I've liked the performance of that AIO above all other so far.
Can you put a topper wax on this after 4 hrs. And if so what topper wax would you recommend? I use collinite insulator wax alot for that. Thanks
Does the pad have to be blown out or changed each pass or section or can it be used for the whole car ? Microfiber pad ? I had a tough time spreading it out not 20 minutes
Looks like a great product! I stay away from AIO's, unless I have pads set aside for them that I don't use with anything else.
This does not matter. I recently used this UNO PROTECT with a yellow pad. It is important to wash the pads immediately after use.
Temp. 30 degrees Celsius =
86 degrees Fahrenheit
Use ARIEL PODS or TIDE PODS.
You will not have any problem.
When is Pure coming to the US?
Hi, is it ok if I use conditioner pad with this product? Thx.
How many times annually can i use it ?
I have been watching Rupes videos and these guys are the best in the business. I have learnt some very valuable tips about polishing from these guys than anywhere else.
I don’t put any pressure on my mk3 15 and it cuts amazing for a one step I personally use 3D one with blue wool rupes lad best one step correction compound out there and works amazing with their pads the IMO is more of a sealant I’ve used it it does barely any correction because it’s for ultra fine finish it’s not a one step correction compound even their blue compound dosent really cut all that much I use thier pads not their compounds if I’m cutting I use nothing but M105
Which pad were you using?
Will I get decent results if I use this product by hand?
Scott from Dallas Paint Correction did a video singing the praises of the yellow wool pad with AIO polishes as a quick one step in Nov 2018. Looks like Rupes saw that video too! I’ve used the wool pad a few times in the last year with another AIO and it does work great in no time at all.
Can you use p&s after uno protect
Hey guys is a one step product always or traditionally a one pass only product?
Sounds great! Can this product be used in the direct sunlight?
Yes it can!
Can I put opti seal on top of uno protect?
What speed did you start with?
Can I use this one for maintance ?
What would you top this with if anything?
how does it compare to jim lafebers(dr beasleys) NSP line and his Z1 AIO???
Levi, after the recommended four hour cure time can this be topped with Wowo's Crystal Sealant? I know you demonstrated that Bead Maker plays really well.
Sealants as a rule should always go on first on a clean fresh surface. So i would say this would not be a product to layer up with as you'll cut your sealant away.
@@tr3v87 So you would put the sealant after doing this step correction?
@@jrsanchez2049 I would say if you’ve used uno protect as a finishing polish you would wipe down before applying a sealant. Or just leave the protection provided by UNO as is and top up with wax as required.
I am going to look forward to seeing the results but think I need to buy the larger size, 250ml will just be a starter.
Nope. You don't need much product unless you're doing 10 cars a week.
20minutes around a car, now that's how Levi is so rich 💵💵
Heard a lot of good things about this product and I'm definitely going to try it. Would love for these companies to make a product specifically designed to be used in direct sun and 85 degree heat. Maybe there's one already out there I don't know about?
The last cut , The Last cut + ..from The Last Detail product line. Highly Highly recommend it
They made it to work , along those conditions 👍🏼
@@joseraya8998 Oh I didn't know that. I shall definitely try it out, thanks!
AT 19:34 Jason starts to talk about keeping it dry for 3-4 hours. So, how does that play into using Bead Maker with it during the wipe off (from your other video you did on the blue SUV)?
The guys actually go into detail about that in the "addendum" clip we added to the beginning of that combo video. (The part where the guys are sitting in the white room before the "actual" video starts) Here's the clip: ua-cam.com/video/FOtwEflgsjI/v-deo.html
Can't believe they keep pushing BM
@@brianballenger36 I hear ya. More like dustmaker.
6:40 Pro Tip: dispensing the product works best when you open the cap.
I close the cap on my products after every application because I shake up the products between every use.
Does this have UV blockers as well?
Crazy that I was the guy who signed this product off for rupes before it was released. Your welcome🤙🏻
How u do dat
can I wash with water after using the product.
How would this work using this on PPF
So when would I apply something like beadmaker afterward? Right after wipe down or would it mess with that 4 hour set time?
@@theragcompany cool! Thanks!
How long will the protection last ? I'm always curious with AIO products. I have used Blackfire One Step with decent results but how long does it last ? 3 months ? 6 months ? Longer ?
3 months
@@usmanyaqub381 Thanks !
Last ten minutes if you scratch it with a tree branch. It will depend on how you treat your car/paint.
Does anyone ever have Rupes polisher kits on sale? Seems like everyone is price fixed.
What pad is that?
When can beadmaker be applied ? After 20 mins or 3-4 hrs? Thx!
Mike - If you apply the Beadmaker after 20mins, the Beadmaker polymer sealants will just replace the Uno ones. If you wait longer, the Beadmaker will add extra protection. That’s my understanding anyway!
which pad is this?
Is that a rupes mk3 polisher? Also because it’s an aio, can it be used with a urofiber?
Yes and Yes!
Does an IPA or panel wipedown recommended before application?
I’d say no as this product is a finish/sealant built in.
Can you add a wax like Collonite 845 on top of UNO PROTECT for extra protection and gloss?
Sure!It goes against the intent of this product but it won't hurt...
Marybeth Eby -- Why against intent? Wouldn’t it add extra layer of protection?
@@jimthomson9044 Because UNOs protect is intended to be a one step process,but you can definitely add wax on top of it..
@@marybetheby5184 I’d prefer to use this product for its cutting + finishing abilities and just replace its protection with something else. Not many one-step products with this capability
@@HEMi1995 Rupes DA Fine cam. Menzerna 2500, Jescar Medium, Meguiar's M86, Optimum Intensive Polish, basically any medium polish can do that without the protective element.
Also, part of Uno Protect's finishing comes from incidental masking of possible haze from the protection ingredients.
What color is the uno protect suppose to be ?? Mine came out pink
They do rolling upgrades to their products. The pink is the latest version.
Can you still apply a sealant and wax to this product?
This product is a sealant itself, it has wax inside
I want a 55 gallon drum of this stuff!
Can I add a ceramic coat after using this product?
No, uno has wax’s and sealants in it so a ceramic coating won’t stick. You need bare paint for a ceramic coating
Ian Musgrove thanks
@@ian300whp Also, some try and use a panel wipe after applying an AIO. This also doesn't work. The panel wipes are not going to remove the sealants and waxes. Just use a pure or primer polish, wipe, and coat.
Is there a video of Levi going around a full car in 20 minutes? Just to remind me how slow I am.
I believe it’s on his public Facebook page. Well worth a viewing.
@@GDavis49 that's a name I recognize from the live stream replay. You need like a superfan badge
Forcedinduction _Drive i would gladly accept the love and admiration of Dane Hennen instead.
How many passes did he do in that 20 minutes per section?
Miah he’s not working it in or spending any time working out defects. More so just applying the product to the car. Look for his video on his Facebook page
how many RUPES yellow wool pads would this process take to do a full car/SUV? 2?
If your cleaning your pad you can knock it out with one but you also need to decide if your removing more clear coat then you might want two or three just so you don't have to worry about the final result marring up as much
The wool is sheading quite a bit, and don’t tell me it is a bad batch. Don’t really love them because of that.
@@Sherukka I wash mine before I use them but even with that they do mess up a bit.
You can't clean a wool pad when the product is wet even with a compressed air. Just throw it to a bucket with water and grab an other one. I would say you need 5-7 to finish a car.
Anyone know what pad he is using in the video?
Looks like the yellow foam pad.
What is the quick detail product you match to Uno Protect?
P&S Beadmaker.
Probably Rupes 606 Rapid Detailer.
I thought Jason rose was from meguiars
I used this on two cars now, it does not hold the standard of quality of the Rupes products i think. I have RUpes machines and really love their products, bt this is not a good one step. Bad at swirl removal and the wax is not good after two weeks.
It always makes me laugh how the Rupes guys do demos and set the polisher on the paint lol. Most shops I have worked in you get fired for that.
It’s a test hood bro lol
Pulled it off of a junkyard car..
The only thing I dont like is that its pink and stains the pads.
No mention of 3D HD SPEED?
Car craft detail did a comparison of hd speed and rupes uno