Norinco's biggest contribution to the Philippine Gun Market is the way that it helps keep firearms prices low, by exporting affordable firearms. They are NOT the best firearms you can buy with money, but if you wanted to arm a huge amount of gunowners on the lowest budget possible, Norinco is the way to go. Their second biggest contribution, is the M201C pistol. Let me know your thoughts!
All my 1911 competition guns have norinco frames. It lasts forever and withstand abuse. Norinco is the sturdiest gun out there, if you know basic gunsmithing, it will not be beaten by anything in the market.
Thanks po sa pagshare Sir. I know for presentation mo yan and by reason of your desire to inform the public. But gusto ko lang magshare ng experience ko sa pagbili with all due respect sa baril na ito. Natutunan ko na kung ako ay bibili, yong gusto ko na at kung kulang ang budget ay mag-ipon muna. For sure, pag tlgang gusto mo, iipon ka. Nasasayang po ang pera at ang baril din pag basta tau bibili na ang criteria lang ay budget (tight budget). Nasasayang din ang slot sa LTOPF. Yong Gun No. 1 ko, ayaw ko n ngayon, pero diko masisi sarili ko dahil 2010 pa ng bilhin ko yon at kulang tlga budget. Then ung Gun No. 2 ko, ayaw ko na din ngayon may ptcfor pa naman at dipa na expire. Sa ngayon, may Gun No.3 ako at Gun No. 4, eto tlga gusto ko noon at contented ako ngayon. Ang mistake ko sa pagbili ay ang gun No. 2, bnili ko kasi dahil tight ang budget at gusto ko agad magkabaril (as in agad-agad). Ngayon, ung gun No. 1 and 2, nsa bahay na lang at tamang back up siguro sa dlawang kanto ng bahay. Yes, pwedeng ganun. But may point is, tila nasasayang. Unless gusto nyo tlga nitong norinco, so be it kasi ang importante ay may pang self defense ka lalo at kung reliable naman ito. Pero kung mas may gusto ka pa, wag ka muna bumili dahil tingnan mo naman, di man lang pinaganda ng China ang pagkagawa.
Sir we used to open US made FA parts coated with cosmoline. We were taught to brush the metal parts while these were soaked in gasoline. Afterwards we would rinse these with soap and tap water. Then we would wipe them dry. The next step would be to lightly lubricate the parts with light oil. Finally, we would assemble the FAs. It is quite a messy process , also a bit dangerous since some of my buddies were smoking cigarettes and if you fail to lightlly oil the parts, they may eventually rust.
It depends on which gun store imported them on and which period of time. for now, it seems mas marami yung M201C "wide" magazines. Yung "skinny" magazines M213 ay mga mas luma.
Hello Philippine Ricochet Line, ang LTOF Application po ba ay nag eexpire after a certain number of months kung di mo natapos ang pag submit ng mga requirements?
Boss...may accent kayo pag nagsasalita. Are you of Arabic or Indian decent? Rolling "R" po kasi kayo makabigkas ng letrang R. But the gun review is tops. The Norinco type 54 or 201C Tokarev is one of the most durable handgun ever made.
Hello po Sir, ask ko lang po. Pwede po ba sa inyo na magpa assist na kukuha po ng LTOF para po anywhere hand carry for self protection. Maraming salamat po 🙏
Ganyan din sakin at Kong Hindi ka bihasa mahirapan ka nyan mag kalas lahat pero sakin easy kona dahil namaster kona Siya. Yong hand grip nyan Meron sikrito Kong paraano kalasin pati trigger nyan pero kilangan matutinan para maayos malinisan
Sir, ano po ma recommend mo na reliable na 380 ACP as a 1st firearm? Start muna po ako sa 380 kase nag try ako sa 9mm and medyo di ko pa kaya yung recoil and wanted to train with a lower caliber muna.
wow, galing nman oh, 7.62 (bala ng AK 47) at 9mm kaya nya kainin? kahit yung mga 500k (alien) to 1m guns , di na kaya nyan hahha. made to last tlga mga gamit noon... tapos ang steel ata neto is yung pra sa rriles ng tren, kahit wala ka nang bala, pwede mo ihampas sa kalaban ang isang kilo na baril na yan...
Ako sir, inalis ko na yun ridiculous safety (sear disconnect lang naman yun) ang pangit lang may butas sa gilid. One day ill have gunsmith tig weld the holes. I read the original tok uses the half cock notch as its safety pero more commonly carried with an empty chamber. Tama ka sir about cocking the hammer before racking the slide. Suot ka ng shooting gloves o kaya lagay ka leukoplast sa web ng shooting hand mo. Hammer bite is real. 😂
I would not bet my life on a chinese- made gun. I have a Rock Island Armory (Armscor) 45 GI. Basic but something that I can bet my life on. Philippine made. Proud it's Philippine made!!!
Norinco's biggest contribution to the Philippine Gun Market is the way that it helps keep firearms prices low, by exporting affordable firearms. They are NOT the best firearms you can buy with money, but if you wanted to arm a huge amount of gunowners on the lowest budget possible, Norinco is the way to go. Their second biggest contribution, is the M201C pistol.
Let me know your thoughts!
Mag kano boss 1911 45pestol..?pwd maka bili
this channel is underrated ✅💯
All my 1911 competition guns have norinco frames. It lasts forever and withstand abuse.
Norinco is the sturdiest gun out there, if you know basic gunsmithing, it will not be beaten by anything in the market.
Thanks po sa pagshare Sir. I know for presentation mo yan and by reason of your desire to inform the public. But gusto ko lang magshare ng experience ko sa pagbili with all due respect sa baril na ito. Natutunan ko na kung ako ay bibili, yong gusto ko na at kung kulang ang budget ay mag-ipon muna. For sure, pag tlgang gusto mo, iipon ka. Nasasayang po ang pera at ang baril din pag basta tau bibili na ang criteria lang ay budget (tight budget). Nasasayang din ang slot sa LTOPF.
Yong Gun No. 1 ko, ayaw ko n ngayon, pero diko masisi sarili ko dahil 2010 pa ng bilhin ko yon at kulang tlga budget. Then ung Gun No. 2 ko, ayaw ko na din ngayon may ptcfor pa naman at dipa na expire. Sa ngayon, may Gun No.3 ako at Gun No. 4, eto tlga gusto ko noon at contented ako ngayon. Ang mistake ko sa pagbili ay ang gun No. 2, bnili ko kasi dahil tight ang budget at gusto ko agad magkabaril (as in agad-agad).
Ngayon, ung gun No. 1 and 2, nsa bahay na lang at tamang back up siguro sa dlawang kanto ng bahay. Yes, pwedeng ganun.
But may point is, tila nasasayang. Unless gusto nyo tlga nitong norinco, so be it kasi ang importante ay may pang self defense ka lalo at kung reliable naman ito. Pero kung mas may gusto ka pa, wag ka muna bumili dahil tingnan mo naman, di man lang pinaganda ng China ang pagkagawa.
Thanks for your advise, i bought a nice unit that i can bring to the range and not feel my gun is cheaply made.
@@aljundating1574 pm mo ako bos baka magkasundo tayo
Sir we used to open US made FA parts coated with cosmoline. We were taught to brush the metal parts while these were soaked in gasoline. Afterwards we would rinse these with soap and tap water. Then we would wipe them dry.
The next step would be to lightly lubricate the parts with
light oil. Finally, we would assemble the FAs. It is quite a messy process , also a bit dangerous since some of my buddies were smoking cigarettes and if you fail to lightlly oil the parts, they may eventually rust.
Nice review sir. Very informative.
Da best
Pang security guard
Nice
P10,000.00 each. Nakita ko yang model na yan nung gunshow noong April 2024.
❤❤❤opo
Good to know na meron palang 2 versions yung Tokarev-type dito sa atin. Which version po kaya yung mas maraming available here sa Pinas?
It depends on which gun store imported them on and which period of time. for now, it seems mas marami yung M201C "wide" magazines. Yung "skinny" magazines M213 ay mga mas luma.
After market mags pala problema.. great video sir idol.
And sir gawa ka ng firing video mo ng iyong new Norinco
Hello Philippine Ricochet Line, ang LTOF Application po ba ay nag eexpire after a certain number of months kung di mo natapos ang pag submit ng mga requirements?
Boss...may accent kayo pag nagsasalita. Are you of Arabic or Indian decent? Rolling "R" po kasi kayo makabigkas ng letrang R. But the gun review is tops. The Norinco type 54 or 201C Tokarev is one of the most durable handgun ever made.
Thank you! My accent is derived from working with Northern Europeans and Americans. It's a bit of a hybrid.
Hello po Sir, ask ko lang po. Pwede po ba sa inyo na magpa assist na kukuha po ng LTOF para po anywhere hand carry for self protection. Maraming salamat po 🙏
Maganda pang-collect, hindi bilang self-defense weapon.
Lodi. Magkano po ba fa, registration sa shooters pagbili mo sa handgun norinco m201C.
Ganyan din sakin at Kong Hindi ka bihasa mahirapan ka nyan mag kalas lahat pero sakin easy kona dahil namaster kona Siya. Yong hand grip nyan Meron sikrito Kong paraano kalasin pati trigger nyan pero kilangan matutinan para maayos malinisan
Sir, ano po ma recommend mo na reliable na 380 ACP as a 1st firearm? Start muna po ako sa 380 kase nag try ako sa 9mm and medyo di ko pa kaya yung recoil and wanted to train with a lower caliber muna.
Bro, pwede test yan 201 kung drop safe at ganun kalaki target group at 10 meters. Salamat.
Saan pwd maka beli nyan sir gusto ko kasi magkaroon
Try checking out Shooters Arms Manufacturing.
wow, galing nman oh, 7.62 (bala ng AK 47) at 9mm kaya nya kainin? kahit yung mga 500k (alien) to 1m guns , di na kaya nyan hahha. made to last tlga mga gamit noon... tapos ang steel ata neto is yung pra sa rriles ng tren, kahit wala ka nang bala, pwede mo ihampas sa kalaban ang isang kilo na baril na yan...
Iba po yung 7.62x25 (tokarev round) sa 7.62x39 (AK round)
@sundaloabel ay oo nga hahah thank you sa clarification. Pistol round pla yung 7.62x25 😅
Ano kailangan kong bumili kanang baril
Kelangan mo ng LTOPF. Makakakuha ka nun sa PNP-FEO.
Wow mura parang gusto ko nyan dagdag sa collection tokarev👍
Saan tayo makaka bili nito bro?
Shooters Arms Manufacturing.
Available papo ba yan boss?
Ayos, cold war vibes 😆
Ako sir, inalis ko na yun ridiculous safety (sear disconnect lang naman yun) ang pangit lang may butas sa gilid. One day ill have gunsmith tig weld the holes.
I read the original tok uses the half cock notch as its safety pero more commonly carried with an empty chamber.
Tama ka sir about cocking the hammer before racking the slide.
Suot ka ng shooting gloves o kaya lagay ka leukoplast sa web ng shooting hand mo. Hammer bite is real. 😂
Saan mabibili yan bos?
Shooters Arms Manufacturing.
Loccation
Sir. Available pa kaya sya today.
Sn nkkbili
Mgkano Yan boss
Parang nangangagat ng little finger paglagay ng mag.
Sir pwd ba bumili sa inyo ??? Mgkano po ?? Pki reply po tnks
Pwede poba bumili
Ang masasabi ko Jan subrang Gandang gamitin accurate Yung sites Wala akung masabi sa performance
Pwd Kaya bumili Jan sayo boss mag kano Kaya 1911 45
Sir pwede po ba bumile. Thanks
Para ka lang bumili ng Airsoft hahahaha!
Pwedeng ipamalo kapag wala ka nang bala. Di ka manghihinayang.
Masyadong ma dal dal..dapat deritso sa point lang
china gun expendable pag nasira tapon nlang
Dont buy Chinese product.
Yan Ang garbage na gun 😆 pag yan lang kaya mo bilhin wag ka nalang mag baril 😊
Sa mura nyan mahiya kana magreklamo😅
Made in china yan hinde yan accurate
I would not bet my life on a chinese- made gun. I have a Rock Island Armory (Armscor) 45 GI. Basic but something that I can bet my life on. Philippine made. Proud it's Philippine made!!!
Bilihin kna yan ser
Sir may contact number po b kyo ng Shooters Arms? Pwede po mahingi?
Garbage gun 😆