I'm loving mine too Kev 😜. Stoked with the beefy updates and new wheels 😍. Not sure on this chassis. Still think M2C 7075 is superior by design for extreme use 🍻🚀🚀😎💪👊👊
So far this chasis is holding strong I am a belive that the 6s exb chasis is just a stock one with exb written on it. It bends like a spoon in the matrix. Hope I continue to have good luck with the 8s exb chasis!
I genuinely love this truck. It’s it’s become one of my daily bashers including the Traxxas XMaxx. For those who are considering purchasing a kit I’d highly recommend it. Fair warning, the mount screws he recommended replacing is without a doubt great advice.I am myself a stripped these bolts and also for sidenote when rebuilding the center differential make sure all bolts are properly tightened unfortunately I did not tighten my centre diff correctly and ended up stripping a gear inside the diff. Aside from those user errors, this truck handles like a dream and feels like a quality basher. Big thank you to this gentleman for making this informative and helpful video👍🏻
Thanks so much Roberto 🤗. Just has this Big girl out again yesterday. So addicting. You're absolutely right about the center diff. It's easy to overfill and not get the diff cover completely seated when tightening the screws down. Especially when using 20mil and/or Silicone ear plugs. 🍻😎💪👊👊
I'm not really wishing to own one. Watching professional bashers like you already makes me happy. You sent that beast super high! So satisfying to see it land on all 4 wheels and hear the chassis slap after those stunts
Thanks Ian 🤗. These large scales are addicting, but take a heavier hand to wrench on. I'm pretty careful with how I lift and load her after tweaking my body more than once 😂. It's truly a thrill to Rip and send them though 😍. I'm amazed a truck this size can move so well and jump so far 😱🚀🚀😎💪👊👊
You bet Brother Stephane 😜!!!! This stand is a back saver 100% 😍. Thanks for your great TEKJO gaskets 👌. They're all I use now. Really appreciate the kind words my friend. 🍻🚀🚀😎💪👊👊
Thanks so much Ray 🤗!!!! I usually ease into a newer rig, but this spot begs for big sends and another storm system was headed our way 😝. Dave and I both wanted to see her fly anyways 😂. Much appreciated Brother.🍻😎💪👊👊
Thanks so much Julian 👊. I try to be as objective as possible about breakages. They're just part of the hobby, like cleaning, doing proper maintenance, and checking fasteners. Any rig can be broken of course. Usually it's driver error or significant impact force. I just try to stay grounded with realistic expectations. If you're going to do huge jumps...etc... you're going to exceed reasonable limits at some point. 🍻🤙🤙😎💪👊👊
Thanks so much Brother 😜!!!! I'll gladly share more flails and bad jumps, but that was the only one 👍. Not afraid to send them, but I'm pretty careful to line these big Beasts up first 👀. I was trying to abort that jump but it was too late. Stacking a rig this size usually means damage. That's how I look at it given the mass involved 🍻😎💪👊👊
@@richduperbash2966 i can't imagine having enough time to edit out that many bad landings. I usually end up with 10 secs of footage after the bad takes are gone! LMAO
Thanks so much Brother Avery 😜!!!! Had an absolute Blast sending her as far as I could 😱🤣🤣. No question M2C 7075 is the answer when you like to play rough 💪. Keep up the fantastic work!!! Super excited to see what you and Mitch come up with next 🍻🚀🚀😎💪👊👊
Always top notch insight and testing! You are one of the best in the biz my friend! Appreciate all you do for us out here! Nice rip session with your bro! Always loving that! He has that Xmaxx going cray my friend. 🤝🤝🤝🏎🏎🏎🤝🤝🤝
Considering the weight fully loaded, not too bad. Still expected a little more out of the chassis though, but for most people it'll be plenty tough. I'm just glad arrma is still coming out with new and interesting vehicles, it's better for the consumer to have choices.
Yet another great session in the books brother 🙏🏼🤟🏼😎 So glad I got to see you rip the new rig around and put her to a true test 👊🏽👊🏽 just a little M2c love and the EXB will definitely be on a even higher level than it already is 👀 I got some tuning to do with my new lighter setup, but overall very happy the Xmaxx lost some serious lbs 😅😂 Can’t wait for the next one brother Rich!
Heck yeah Brother Dave 😜!!!! Had an absolute Blast out there with you as always Bro 🤗. Big props for winging it with your brand new setup. She was looking nimble with the 1717 👊. Bummed I missed recording some of your huge airs when I was wrenching. You'll have her dialed in with the settings for sure. Appreciate your help with hammer time 😂. The EXB took a pummeling, but M2C beef is hard to beat. Definitely impressed with how the truck performed overall 👍. So grateful we could hook up again. Looking forward to the next session Brother!!!! 🍻🚀🚀😎💪👊👊
Thanks so much Brother 😜!!!! I'm very happy with this set-up 😍. Feels like she's geared right with plenty of power and perfect temps. Just need to tune the front and rear diffs.👌👌😎💪👊👊
Sick video as always buddy its never disappointing just got mine in the mail today servo is in shoe goo done just waiting on my max 6 1100kv combo and 27t pinion great bash man ✌
Thanks so much Brad. Congrats on yours Brother 😱!!!! Such a beautiful Big Beast 😍. I ran my K8s RTR with 1100 5687 Hobbywing with 28/47 gearing and she moved pretty nicely. 😎💪👊👊
@@braddobbs3533 I'm not positive, but probably around a 24T 🤔. I would just takes temps regardless and aim for around 150F. Much hotter I'd gear down a tooth. 🍻
Thanks so much Brother 😜!!!! I'm super impressed with it overall 👀. ARRMA definitely improved some key areas with this one. Hope all is well my friend!!!! 🍻👍👍😎💪👊👊
Amazing bash brother. That little 1717 did great in a big ol' xmaxx still looked like it could use just a bit more. Exb looks great and is flying well out there. Super stable
I really think the EXB Lineup was made for guys like you Rich. You love to tinker and make things you're own so it's perfect. A 30+ LBS RC Man that's a total beast. I'd kill myself with that. Been using Gorilla Tape on my Shells with some success, might have to change to your way I like it. Another great video from the Masher of The Bash!
Thanks so much Harry 🤗. These BIG rigs are a different kinda experience for sure 👀. I've hit myself before and you definitely feel it Brother 😱🤣🤣. You can end up on the ground if you're not careful. I will still use Gorilla tape sometimes, but have largely gone back to using shoe Goo cuz it's far stronger and lighter overall. Tried E6000 and several other ideas through the years, but the Goo has done the best over time. The EXB did fantastic considering her size and how harsh some of those hits were 👀. Looking forward to getting her 100% dialed in soon. 🍻👍👍😎💪👊👊
Hey really easy fix to stop breaking the blades is to put a small self adhering clear bumper that they use on cabinet doors. You can get them at home depot. Helps take some shock from the blades and has stopped mine from breaking. Used to go through one every bash. Also did the screen mesh to stop the small rocks from wedging in heat sync.
Thanks so much for the tip Brother 😜. Definitely going to try it out. I know the hard landings from height do a number on the blades. Gets old replacing them. 🍻🤙🤙😎💪👊👊
Fantastic bash there brother Rich.... Kraton 8s EXB is a beast. Props to Arrma for all the needed tweeks added for harder bashing. It's true not everyone is gonna send these to the moon like you so we gotta be realistic, WELL PUT, for those of us who get stupid M2C is there for the ridiculousness 😎👍💪💪 Killer triples with the big girl, I absolutely love that spot, Dave was killing it as well with his wild Xmaxx 😎 Rock on brother #ArrmaTough #M2CTough #MitchLooperRocks
Thanks so very much Brother Dennis 😜!!!! Had such a Killer time out there again with Dave 🤗. This spot is about perfect for Big vertical airs and flips 😍. The headwind was harsh, but we made the best of it. Dave pulled some huge launches I missed while fixing the EXB 😝. Props to him for winging it before having his settings dialed in with his new Castle setup 👊. ARRMA did a brilliant job with the updates 😍. I'm loving this EXB 😱🥰🥰. M2C beef is still top dog for regular extreme use no question. Mitch's 7075 T6 is top shelf USA grade 💪. Really appreciate the kind words as always Brother. 🍻🚀🚀😎💪👊👊
Nice video brother 👍 and for a 30 pound truck I say it did great and the fact that you fix it in the field makes the day even better 👊 well done on the setup it handles well
Thanks so very much my Brother 🤗. I'm super impressed a 30lb rig can take this kind of punishment 👀. So happy I could get her fixed up and back bashing 😍. Truly appreciate it my friend!!!! 🍻🤙🤙😎💪👊👊
😮 Wow, you are really sending the ## lb of truck over the ramp... And the rig took it quite well. Sure, accidents happen and nothing is unbreakable, especially when send as if there is no tomorrow 😮 Arrma is really killing it with the EXB Models, they are just awesome. I am building an K6 EXB right now. 😘😘😘 Bash on!
Thanks so much dear Kimberly 😍. This first bash was fairly brutal. Lots of vertical airs with harsh flat and off angle landings. Very impressed with what ARRMA's done with this EXB 👀. We'll see how the chassis holds up long term. Accidents definitely do happen 😱🤣🤣. Excited to see your new EXB 6s build 😘😘😎💪👊👊
Thank you Brother 🤗. Stoked about the beefcake parts ARRMA threw on this new EXB 😍. Clearly they listen closely to basher feedback and do what they can to keep improving. 🍻😎💪👊👊
Totally SICK first crack with Kraton8S EXB brother Rich. She looks absolutely sick under the sun 🌞. Plenty of beef part with this EXB but we know Mitch work still king👑 when it comes to extreme bashing. Glad the HS Servo is working out well for you. Max5 and 800-1100kv Is legit option system for this Beast. just absolutely love how the Kraton8S handle man. Killer ramp hits as always. Dave I Killin it with Xmaxx too! Awesome sesh as always brother. Stay safe and bash on brother
Thanks so much Brother Chris 😜!!!! I didn't plan on flogging her the first run, but this spot begs for Big sends Brother 😱🤣🤣. She did Killer considering the sideways landers and brutal vertical drops 👍. Huge props to ARRMA for the beefcake updates where they were needed. M2C will always reign supreme for max durability with extreme bashing 💪. So stoked Dave was available for this session Bro. He really never holds back and just stays positive all the time 🍻. Props to him for completely winging it with a brand new setup and no ESC tune 😱. Such a Killer fun time out there. Really appreciate it Brother. 🍻🤙🤙😎💪👊👊
This is Rich Duperbash Guys 😜💪💪 yeah brother as always very very nice test end extreme bashing, really a beautiful beast, and then the combo you have mounted is really powerful, it looks as responsive as a 1/8 👍👍 a greeting also to your crazy friend with the x maxx 😂😂💪😜 Good bash my friend
Thanks so much Brother David 😜!!!! Wasn't planning on an extreme first test run with triple BF's...etc...but it went that way out there with Dave and his XMaxx 😱🤣🤣. Such a Killer fun session, despite the breakage and high headwinds we were jumping straight into 🚀🚀. The 980kv Hobbystar feels great with this 32/39 gearing 😍. Loving the new Big Block tires too. They flip like Mad and are very forgiving. Appreciate the kind words as always my friend!!!! 🍻🤙🤙😎💪👊👊
@@richduperbash2966 it's a pleasure my friend😁💪, as soon as I don't have the possibility to mount the hobbywing max 5 I want to put the 32/39 coupling too, it inspires me a lot
@@richduperbash2966 hey rich , my buddy gave me a team associated rc8.2e , not as good as the Mojave but gets me rolling , how ever it needs an A arm , I am unable to find any here ......maybe if your at your local store see if they have a set and I will pay for them and the shipping lol kinda desperate now ha ha.
Thanks so much Moe 😜!!!! I did bring my 6s EXB but it got late and the wind chill plus skipping lunch had me ready to pack it up 😂. I'll be bashing them together very soon 🍻🚀🚀😎💪👊👊
Bad ass Rich!! Loving how the EXB tires are preforming 🤩 Chassis bent and B block already broken 🤣 Leave it to you for the Extreme Bash 💪💪 That 39t spur is magic even with the stock 8S system. I can't wait to drive mine more 😎
Thanks so much Brother Aaron 😜!!!! Yeah I flogged on her pretty hard 😂. Had some sketchy sideways landers and high vertical drops on that lumpy hardpack 👀. The tires are Killer!!!! Stoked about the shocks and links too 💪. So happy ARRMA went with a direct fit 39T spur option 😍. The chassis will not tolerate this style of driving for long though 🤣. M2C is the only solution as I see it. 🍻🤙🤙😎💪👊👊
Salut Rich Sympa comme toujours ces un réel plaisir de regarder tes vidéos À la la ill donne envie se Kraton Exb 8s ,equiper comme tu as fait et avec le nouveau châssis 7075 ,sa a l'air de bien tenir le choc ,vu se que tu lui fait subir...mdr Aller Tchuss l'artiste
Congrats on the new 8s exb looks amazing. Such an awesome bash. I agree we can only expect so much with the trucks this big and heavy. Ive been nothing short of amazed and impressed by mine i can only imagine the exb with more beef. I think those shock are on my "need" list 😂 the rotations you where getting where nothing short of sick man. I hope they give the 8s backflips the exb treatment soon too cuz it would be awesome hahaha. I would love to still see an optional m2c chassis that would haveva widened rear droop section just for us running rpm arms. Could widen it and use the bottom of the arms for some sort of droop setting. Maybe be able to build it up there like the chassis stiffeners attach.thanks for another epic bash video man 🍻🍻🍻🍻🍻🍻
Thanks so very much Nick 🤗. I'm still in awe with these 8s rigs 😱🥰🥰. Never imagined sending rigs this huge like this and not having the wheels fall right off 😂. It's just incredible what ARRMA has done with this unique platform Brother. Some people get (head in the clouds) critical and say "it broke already"...."the arms are made of glass"...etc. Look at the big picture I say. This is bashing, stuff breaks. It's part of the hobby regardless of brand preference, loyalty, and all the online gibberish. For a rig this size and weight to perform so well is mind blowing to me 🙀. The fun factor is off the hook too 😍. I've had a set of front RPM arms on standby for a little while now, just haven't needed them. Kinda shocked I didn't break an arm with those rough landings this session 😂. That would be sick to see some EXB Backflips 👀. Mitch and Avery with M2C are all over new 8s upgrades. Expect to see beefcake driveshafts and outdrives soon. Their new screw machine will make any steel part on the truck plus titanium options. Pretty certain we're in for a stellar year of new stuff all around Brother. 🚀🚀😎💪👊👊
Thanks so much Brother 😜!!!! I've been sending my upgraded RTR 8s rigs for awhile now 😍. Just have to land carefully given the sheer size of these Beasts. Got a bit squirrelly off the ramps with this one 😱🚀🚀😎💪👊👊
Hi mate. Just a suggestion try gluing stubby cooler rubber on the inside of the body above shocker tower to stop shockers damaging the body above shocker.
Thanks so much Armando 🤗. Really appreciate the tip Brother 👍. I usually use 1/4" thick self adhesive felt blanket from Walmart. It's designed to stick on furniture legs to protect floors or go under appliances. It's paper light, but acts like a helmet cushion during impacts. Usually use hot glue if it starts to loosen. Guess the principle is the same. 🍻🚀🚀😎💪👊👊
I would think it is hard to send any stock rig like that and not damage something. Both the Xmaxx and the EXB really took a beating and with little wrenching. As always man, Great video, you really make that 29 lb rig fly!!
Thanks so much Jon 🤗. So true Brother 👍. Sending these big Beasts puts some serious strain on the components no question 😂. Had a Blast with brother Dave and his XMaxx!!!! 🍻🤙🤙😎💪👊👊
Thanks Brother 🤗. Every bit helps for sure. I'm always finding little pebbles and sticks in my fans 😂. They still break from hard impacts, but I try to do what I can. 😎💪👊👊
Thanks so much Brother 😜. She took a pretty mean beating 👀. Our landing area was rock hard from recent tractor traffic too. She'll be getting some M2C 7075 T6 eventually. 🍻🚀🚀😎💪👊👊
I can’t believe what a beating you gave that EXB lol you should do product testing for the US military hahahah Absolute madness Rich. Loved the video brother 😎🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Thanks so much Frank 🤗. The EXB took a serious flogging. Still shocked she took that sideways hit off the ramp into the mound 👀. Nothing is unbreakable, but she's pretty dang tough. 🍻🚀🚀😎💪👊👊
As you said tho most of us ain’t going to literally launch them like 40ft into the air 😂😂 I just got my exb still gotta put it all together there’s no way I would jump mine like that after spending so much money on it 😂😂
Nice run as always bro 😎. Thanks for sharing the great info on this beast 👍 . I have one of them rigid stands . Purchased mine from Home Depot 2years ago .there Great for 1/5th scale cars . Hope you and your family are all well 👊☺️ stay safe brother.
Thanks so much Brother 😜!!! Really wish I'd gotten the Rigid stand sooner 😂. I've tweaked my back a few times wrenching on these 8s Beasts and even the smaller rigs all hunched over. Hope all is well with you also my friend 🤗👍👍😎💪👊👊
Great bash brother!!! curious where you got that adjustable heat sink??? I need something for mine running 800kv in mine going to 39 spur after I get some fans in
Thanks so much Jonathan 😜. I got my heat sink from Gamechanger RC. Not sure what brand it is 🤔. Think he sources them to build fan kits with. He's available on eBay for messages...etc. 🍻😎💪👊👊
You’ve convinced me! Buying one tomorrow. What’s that stand you said you bought at Home Depot at min 9:21? I didn’t catch the name of it. Thanks in advance!
That's awesome Jay 🤗. The stand is a Ridgid Flip Top. Just add a pit mat to the top to keep the rigs from sliding around. www.ridgid.com/us/en/flip-top-portable-work-support
Rich im a huge fan of your channel . I have a very similar build on the K8S EXB, I’ve been using the HW 800KV with 34/34. It only been 55degrees here and even after 15 mins bashing I’m hitting 170 temp on motor . I recently got my hands on a HOBBYSTAR 840KV , I know this is one of your favorites with 1:1. Can you tell me have you heard of guys running hot with the HW 800 in this heavy rig ? Also is it true the HS 840 makes more wattage than the HW 800. I see you run your setup flat out a lot with hitting 170 on a 90 plus day. What is the secret. I hate to run fans but if I have too , love 1:1 Thank you for any help you can give me. Keep up the great videos .
Hey Kris 🤗. I've heard several instances of the HW 800kv getting hot on 1/1 gearing and I'm really not sure why 🤔. Obviously wheel size/weight, mesh setting, bearing health, and driving surface/style are all factors. Not sure how the wattages compare with Hobbystar, but I haven't had overheating issues with my 840kv or 980kv with proper gearing. 😎💪👊👊
Hi there! Great bashing man! I have the K8S EXB and im also kind of new to the hobby.. But one thing i noticed is that the front wheels are balooning like crazy.. will this balooning stop if i put ear plugs in the center diff? Im affraid that i will explode the front tires.
Thanks Brother 🤗. Yes.... Silicone ear plugs in the center diff definitely helps mitigate power bleeding to the front wheels on harder throttle. These new Copperhead 2 Big Blocks are going to balloon no matter what, but the ear plugs certainly help. The smaller Outcast 8s Backflips also balloon, but not as radically having less rubber and mass. 🍻😎💪👊👊
Fantastic video. Wish I had somewhere even remotely that size where I'm from to take my cars. If I was to go for just one of these which would you recommend the exb or the xmaxx?
Thanks so much Cliff 🤗. Definitely grateful to have this spot for now 😍. Soon they'll be houses going in there. The EXB and XMaxx are completely different rigs. Really depends on whether you want more monster truck or monster truggy. The EXB is bigger and heavier no question, but it also handles much better. Boils down to preference mostly. 2 completely different designs. 🍻😎💪👊👊
Great Bash Rich, is it just me or was the Kraton leaving the ramp slightly rotated/twisting? Makes for hard landings, you did really well in the wind and under attack from Dave. Great to see you having fun with a mate, thanks for your continued hard work. Take care.
Thanks so much Brother 😜!!!! Yes indeed on several off camber rotations 😱. The internal framing on my plastic ramps have started failing 👀. One of the ramps is springing more than the other under compression. It's spreading downwards from side to side. That plus the bigger tires and wind was bucking her off axis big time 👀. Been trying to get new ramps, but these are basically discontinued and I can't find suitable replacements. Definitely makes air control and clean landings far more difficult. The other thing is these Big Blocks. They flip WAY faster than I expected 😂. Never seen anyone pull easy triples with a Kraton 8s. That's going to take a run or 2 to adjust to. The wheel mass is pretty touchy with this 980kv setup. 🍻🤙🤙😎💪👊👊
@@richduperbash2966 you did so well keeping things on all fours for the landings, I know I would have gone home with a bunch of parts and not a complete rig. Good to see Arrma working on those tyres, hope you get used to them quickly, do you think the wheel has been redesigned or will the thicker rubber help the wheel to remain intact? Thanks for the reply mate, I don't always like to comment because I don't want to take up your spare time, I was just really impressed that you were able to straighten things out after the take off's. Take care and have a great weekend coming up.
@@jonowillmer thanks so much Brother 👊. I do my best to land cleanly, understanding how these rigs take damage. The Big Blocks seem to have a beefy carcass. No signs of stress at the glue beads 👍. The foams feel firm, yet have nice compliance. Very forgiving tires thus far. Just have to be mindful of the mass because they correct very quickly midair 😱🤣🤣. Appreciate your comment Brother. Have a great weekend too!!! 🍻
Thanks so much Brother 🤗. Had a great time out there 😍. Overall, I'm super impressed with the EXB!!!! She took a mean beating at this rough spot. 🍻👍👍😎💪👊👊
@Rich Your aerial skills are on another level. I’d never think that you could fly the 1/5 Kraton just like the 6s. Gotta ask you what Transmitter/receive combo do you run? Amazed at your control skills! SUBBED!!
Thanks so much Scott 🤗. I'm still amazed this Big Beast can fly so well 👍. I'm running the old Tactic TTX300 controller/reciever that use to come with all the ARRMA's. It's simple, but responsive with great range. I've always liked the ergonomics and spring tension. There's much better units of course, but I don't need or want anything too fancy. Really appreciate the kind words Brother. Happy bashing. 🍻😎💪👊👊
Dammmm what a nice durability test I liked how they sent the xmaxx too with no remorse lol what voltage do you run your steering servo at awesome video rich
Thanks so much Robert 😜!!!! Dave doesn't hold back with his XMaxx 😱. I missed catching his biggest jumps while I was fixing my rig unfortunately. He was trying to adjust his ESC settings on the fly. I'm running 7.4 volts BEC on my Max5. 🍻🚀🚀😎💪👊👊
Just what I expected to see. Your hands at the control of that beast results in fast paced, high flying, controllable skilled action🔥 Glad to see the rod ends and shocks held up too. I see an M2C chassis coming for you😛 for the added durability especially the way you send it. The King looked like the King out there haha. Good stuff as always my man💯
Thanks so much Brother 😜!!!! Very impressed overall with this new Beast 👀. Has an absolute Blast out there breaking her in and pushing her to the brink. Definitely will be getting an M2C chassis at some point. Just makes sense for the driving I enjoy most. Appreciate the kind words as always Brother!!!! 🍻🚀🚀😎💪👊👊
Thanks Jimmy 🤗. Not sure on this vs the Losi DBXL-E. Haven't owned one to really give a good, solid opinion. They look awesome and I've heard great things about them. Just think they're quite a bit different in comparison 🤔. Haven't seen anyone doing huge jumps with theirs, but it sounds like they're built well and guys really like them overall. I know they make aluminum upgrade braces...etc.. for the Losi too. 🍻😎💪👊👊
So Rich, dope video brother, quick question. Do you recomend the new "big block" factory tires for bashing over the Duratrax Hatchet Xs' or the Powerhobby Raptor XLs?
Thank you Brother 🤗. I'm really liking these new Big Blocks 😍. Very forgiving with nice lugs 👌. They flip like Mad too 👀. I like Duratrax, but they're pretty stiff and bouncy and I cracked a hex in my Six Packs. Haven't tried the Raptors, but think they're too big for my liking. 🍻😎💪👊👊
Thicker fluid slows the natural transfer of power to the inside wheel in turns as the car leans outward and the inside wheel lifts. Basically, you can rip out of turns with thicker front fluids, instead of having the inside tire ballooning and wasting power. It slows initial turning slightly, but is far better for going fast with maximum traction and control. 🍻😎💪👊👊
I bent my Kraton EXB into a chicken taco at the skate park in the first 5 minutes. I need an m2c chassis. The stock one can't be 7075 as it scratches too easily with the hardness tester. But boy is it fun as you obviously know from the insane dolphin-like acrobats you do, lol.
M2C is the answer Brother 👊. Unfortunately, the EXB likely uses 7075 T-0 (cheap Chinese grade). It's no where near as strong as true 7075 T6 sourced in the U.S. Skateparks are harsh on any RC, but M2C will take it. 😎💪👊👊
Rich which radio do you prefer running? Was not sure if you ran different radios on your bashing rigs and racing rigs or the same one. I was trying to debate if I want to spend the money on a nice radio and use it for everything or just get something for bashing with the EXB and continue to have a radio per truck.
I really only run cheaper, simpler radios. Mostly use Tactic TTX300 for the reliable range and responsiveness. The newer Spectrum SLT 3 isn't bad either. Basically have to have separate radios cuz my kids and friends often drive my rigs with me too. 🍻
@@richduperbash2966 Rich thanks. Yeah did not think about that to much at all regarding kids and friends coming over. Good points for sure to keep in mind. What pinion gear brand would you recommend for my EXB build? I assume Robinson Racing but that is just me assuming. Also what gearing do you prefer and run in your cars?
Thanks Brandon 🤗. I think the pin bent because I busted the suspension mount, didn't realize it and kept launching her 👀. It's possible I caught the mount on the ground or a rock too. No biggie. Bash, fix, repeat. 🍻😎💪👊👊
@@richduperbash2966 yeah, most likely, it took alot of bashing though, atleast youre not snapping lower arms already, im hoping to work on my reeper build in the coming weeks, maybe some dboots on 24mm hex in there
I think Mitch is about done sorting the first batch 👀. Him and Avery did a couple small tweaks on the prototype ones to add absolute maximum strength 💪. I'm working today, but I'll try to check in with him about when they'll hit the website.🍻 😎💪👊👊
i was considering selling my k8s to get this exb, i dont think i will solve any problem after seeing kev's n ur vid here rich 😂 very good video i love the xmaxx colored theme🔥🔥🔥
I wouldn't sell my K8s either Brother😱. It's an absolute Tank with the M2C chassis and other tidbits 💪. Overall, I am impressed with all the other changes 👀. The tires, shocks, links, rod ends, and motor mount all held up phenomenally well considering the harshness of this first test. The chassis simply isn't aftermarket level. It can't and won't handle the same abuse I've grown accustomed to putting my other 8s rigs through. It would probably fair better with moderate use. Trying to think objectively as many people don't do huge sends...etc. It definitely puts Crazy and sometimes unreasonable strain on components. 🍻🤙🤙😎💪👊👊
@@rcmelfish9787 I honestly wouldn't run either Hobbywing in the Kraton 8s. The 1100 5687 is too small from past experience with it in my K8s RTR. I've also heard too many guys online have had heat issues with the bigger Hobbywing 800kv 🤔. Personally, I'd recommend either the 840 or 980kv Hobbystar. Both have done excellent for me and they're cheaper than the Hobbywing last I checked. I get mine from RCJuice.
How do I make it so people can comment on my videos my hobbywing max6 don’t beep with I turn it on it flashes the same amount of times for what ever lipos I use in there but no beep noise any ideas mate
Not exactly. I started using a 39T Limitless spool gear as a spur earlier last year. Fortunately, ARRMA now offers a direct fit 39T optional spur gear in the box with the EXB. 🍻😎💪👊👊
@@huntire6861 yes indeed. I run 2 Limitless gears 34/34 pinion/spur gearing with my beefcake M2C Kraton 8s with 840kv motor and was running 34/39 gearing (pinion/spur) on my Outcast 980kv, all Limitless spool gears. 🍻
Rich I need sone advice please I am going to run the 800kv Hobbywing combo but I’m not sure on the gearing and pinions are a bit hard to come by here so I’m going to order from overseas. So what gearing would you recommend? Thanks 👍
@@grumpygrandpa3640 probably an 1100kv. My Kraton was quite fast with the smaller 5687 Hobbywing with 29/47 gearing. Castle and Leopard both offer larger 1100kv options if you want more power/torque. 🍻
Thanks so much Brother 😜. You're exactly right 👍. The ground was wicked hard in our landing area. Breakages are just part of the deal. She took some brutal hits and hard sideways landings 👀🍻😎💪👊👊
Run times aren't bad. Just depends on electronics, packs, and driving style. I get probably around 15-20 minutes using Zee 7200mah 80c packs. That's with pretty heavy throttle use. I often stop before LVC as a habit (3.7-3.8V). Don't like having power loss mid-air 😱🤣🤣😎💪👊👊
My guess is it wasn't assembled correctly from the factory or didn't have enough diff fluid. Gear failures are extremely rare with the platform so long as the diffs and bearings are properly assembled and maintained.
Hey Brother 👊. I'm happy with 32/39 for this 980kv setup so far 😍. I would probably go straight to 34/34 or 39/39 with the Hobbywing 800. Running 34/34 with my 840kv Hobbystar in my RTR K8s and she Rips. 🍻😎💪👊👊
Rich question for you as I am new to the Arrma scene and been 15 year hiatus from RC until this past month when I picked up a Maxx. Now I am looking at the Kraton 6S or EXB. I was wondering what are your thoughts on the Spektrum ecosystem? I dont know much and seem to get mixed results from my searches and video watching (people love it or hate it). If I am wanting the real time telemetry like Traxxas provides with there IQ setup am I stuck with Spektrum or could you get the same effect using a Sanwa or Futaba transmitter with the correct motor/esc pairing? Other thing is would you recommend getting the EXB and building it out or for me to get the RTR and then just upgrading parts as things break? I was leaning towards the EXB and then putting in either a Spektrum Firma 160 Amp Sensorless Brushless Smart ESC & Motor Combo (1250Kv) or Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor since it gives me the head room to go 8S down the road.
Hey Donnie 🤗. Pretty certain you can pair a non Spectrum controller with the reciever/ESC and still have telemetry functions 🤔. I haven't had a true need for any of it personally. You could go EXB or RTR really. The EXB has some nice upgrades, but the chassis is nowhere near as strong as M2C Racing 7075. Ditto for the towers or chassis braces. The Castle system will outperform the 1250 motor on 6s. I can't recommend 8s with the 6s rigs for bashing.🍻😎💪👊👊
@@richduperbash2966 Rich thanks for the feedback, I was binge watching your videos and trying to learn more and more. I am kind of leaning towards the EXB since I figured maybe it has some better upgraded parts that you are not upgrading with M2C stuff. But then also thought well could just get RTR and just replace the stuff on there with M2C. Real world problems I say LOL. If I did the RTR route other than the chassis, towers and chassis braces (which would be candidates even for the EXB) are there other items that need to be replaced but don't on the EXB because they are better on EXB? The telemetry stuff is just really really neat and fun to have all the data and be able to look and see it. But I just know what I know from getting back into it finally with the Maxx and the Traxxas IQ stuff. However not sure if it is actually useful or just fun nice to have data.
@@DonnieKluck most make the EXB vs RTR decision with electronics also in mind. If you have spares laying around, the EXB makes more sense. Obviously, the EXB has LSD diffs. I'm fine using standard shimmed diffs myself. Because the V5 now shares the same EXB arms and geometry, I think that's an added consideration for starting with the RTR and upgrading as you go.
@@richduperbash2966 Rich thanks, I have seen that as well and been considering that just because I am getting back in to the game. Also thought maybe if I try to build out a RC can start getting a better electronics as far as transmitter goes for future cars. But it is good to know that if I went with the RTR there isn't way to much much difference between the two. But man trying to figure out how to build out the EXB is a lot more difficult or time consuming than I thought. But think it is mainly just trying to find out what you actually want to put inside it and keep second guessing anytime I think I figured it out LOL BTW so you have to get clearance with the FAA since you're launching your Kraton into orbit everytime you go out to bash 😂
This thing is awesome but I have a hard enough time moving my xmaxx around being im in this damn wheelchair lol probably won't get this heavy rig but its nice to watch others bash it! For now ill stick to my "light" xmaxx lol bash on brother!
Thanks so much Todd 🤗. I'd honestly feel the same. This rig is noticably bigger and heavier. I'm quite careful loading and moving her around 👀. Already tweaked my back and wrists a few times. Happy bashing my friend.🍻😎💪👊👊
And what type of motor are you running is it 980kv or 780kv because all I can find for the hobbystar is the 780kv 56112 motor. And what pinon would be best for off road for the 780kv motor. Thank you.
I'm running the 980kv with Max5 and 32/39 gearing 👍. I would try the 780kv with 1/1 gearing. Either 39/39 or 34/34 using Limitless spool gears. The lower kv motors have to be geared tall for good top speeds. 😎💪👊👊
I run a Power HD 23kg WP in my 6s rigs and a Hobbystar 6912 HV in the 8s rigs. Just have to add an extra M3 spacer to the servo saver adjustment screw and use the ARRMA 8s larger replacement servo tray. 🍻😎💪👊👊
That’s awesome how you said be realistic because of the size and girth of the 1/5 size. Then you send it to the moon, further then I would send my 1/8 kraton. Awesome so see someone who drives a arrma on YT
Thanks so much Brother 👊. I was still gonna bash how I like, but many people are unrealistic and think these trucks won't break 👀. Just trying to convey some ownership regarding breakages. If you spike any big rig into hardpack, you have to own it. 🍻😎💪👊👊
Quick question I’m using Spektrum 14.8V 5000mAh 4S 50C battery on my kraton 8s but it seems to give out a lot I’m thinking about going with another brand any recommendation on the best batteries to put in a kraton 8s I look for batteries on Amazon that people have recommended on UA-cam but all I see is bad reviews it seems like on Amazon it’s a hit or miss
Hey Martin 🤗. I've had good luck with my Zee 7200mah 80c 4s hard packs. Also had good luck with Hobbystar and Yowoo graphene packs. Just have to be careful with Yowoo that the size dimensions are correct for the truck. I think 5000 50c is too small for the power draw of these big Beasts 😱. I'd recommend atleast 6500-7500mah 75c+. 🍻😎💪👊👊
Thanks so much Brother 😜!!!! The 1/8 size is my overall go to basher 😍. Very true about the size 👀. Definitely have to bash these huge 8s rigs with the mass in mind.They won't take nasty hits like the smaller rigs. Think it's just physics really. Pushing these bigger Beasts is a different kind of experience though. I find it pretty addicting 😱🤣🤣🍻
That's tough Franky 🤔. If I could only have one I'd say the 6s. That said, the 8s is a different type of thrill and absolutely hammers bigger terrain 😱. Both are mad fun. The 6s is faster, more agile, and has the durability advantage from a total mass and physics standpoint. 😎💪👊👊
I'm loving the 8s exb but disappointed with the chassis, bent mine 1st pack, no bad landings
Gthoh
Rip disappointing
I'm loving mine too Kev 😜. Stoked with the beefy updates and new wheels 😍. Not sure on this chassis. Still think M2C 7075 is superior by design for extreme use 🍻🚀🚀😎💪👊👊
So far this chasis is holding strong I am a belive that the 6s exb chasis is just a stock one with exb written on it. It bends like a spoon in the matrix. Hope I continue to have good luck with the 8s exb chasis!
@@joelasher6281 lol you can measure the exb chassis definitely thicker more sturdy
I genuinely love this truck. It’s it’s become one of my daily bashers including the Traxxas XMaxx. For those who are considering purchasing a kit I’d highly recommend it. Fair warning, the mount screws he recommended replacing is without a doubt great advice.I am myself a stripped these bolts and also for sidenote when rebuilding the center differential make sure all bolts are properly tightened unfortunately I did not tighten my centre diff correctly and ended up stripping a gear inside the diff. Aside from those user errors, this truck handles like a dream and feels like a quality basher. Big thank you to this gentleman for making this informative and helpful video👍🏻
Thanks so much Roberto 🤗. Just has this Big girl out again yesterday. So addicting. You're absolutely right about the center diff. It's easy to overfill and not get the diff cover completely seated when tightening the screws down. Especially when using 20mil and/or Silicone ear plugs. 🍻😎💪👊👊
I'm not really wishing to own one. Watching professional bashers like you already makes me happy. You sent that beast super high! So satisfying to see it land on all 4 wheels and hear the chassis slap after those stunts
Thanks Ian 🤗. These large scales are addicting, but take a heavier hand to wrench on. I'm pretty careful with how I lift and load her after tweaking my body more than once 😂. It's truly a thrill to Rip and send them though 😍. I'm amazed a truck this size can move so well and jump so far 😱🚀🚀😎💪👊👊
Thanks for the shout out brother!!!
Awesome vid, great tips also !
I'm getting a stand now lol
🙏🙏🙏👍🏼👍🏼👍🏼
You bet Brother Stephane 😜!!!! This stand is a back saver 100% 😍. Thanks for your great TEKJO gaskets 👌. They're all I use now. Really appreciate the kind words my friend. 🍻🚀🚀😎💪👊👊
Wow, awesome height and air time on the jumps Rich! Again you make it look so easy! Excellent video👍
Thanks so much Ray 🤗!!!! I usually ease into a newer rig, but this spot begs for big sends and another storm system was headed our way 😝. Dave and I both wanted to see her fly anyways 😂. Much appreciated Brother.🍻😎💪👊👊
Even though you got the car for free I absolutely love the transparency on all the breakages, much appreciated brother. And by the way sick session👍.
Thanks so much Julian 👊. I try to be as objective as possible about breakages. They're just part of the hobby, like cleaning, doing proper maintenance, and checking fasteners. Any rig can be broken of course. Usually it's driver error or significant impact force. I just try to stay grounded with realistic expectations. If you're going to do huge jumps...etc... you're going to exceed reasonable limits at some point. 🍻🤙🤙😎💪👊👊
10th! That’s pretty awesome. I like they way you edit but I would love if you showed more of the failed landings so we could see how durable it is!
Thanks so much Brother 😜!!!! I'll gladly share more flails and bad jumps, but that was the only one 👍. Not afraid to send them, but I'm pretty careful to line these big Beasts up first 👀. I was trying to abort that jump but it was too late. Stacking a rig this size usually means damage. That's how I look at it given the mass involved 🍻😎💪👊👊
@@richduperbash2966 i can't imagine having enough time to edit out that many bad landings. I usually end up with 10 secs of footage after the bad takes are gone! LMAO
Dude! What an awesome bash! Thanks for the killer setup tips and of course the awesome airs! Time for some M2C beefcake now!
Thanks so much Brother Avery 😜!!!! Had an absolute Blast sending her as far as I could 😱🤣🤣. No question M2C 7075 is the answer when you like to play rough 💪. Keep up the fantastic work!!! Super excited to see what you and Mitch come up with next 🍻🚀🚀😎💪👊👊
Always top notch insight and testing! You are one of the best in the biz my friend!
Appreciate all you do for us out here!
Nice rip session with your bro! Always loving that! He has that Xmaxx going cray my friend.
🤝🤝🤝🏎🏎🏎🤝🤝🤝
Thanks so very much Brother 🤗. Had a Killer time out there with Dave and his XMaxx 😱🚀🚀. Really appreciate the kind words my friend. 🍻🤙🤙😎💪👊👊
Considering the weight fully loaded, not too bad. Still expected a little more out of the chassis though, but for most people it'll be plenty tough. I'm just glad arrma is still coming out with new and interesting vehicles, it's better for the consumer to have choices.
Yet another great session in the books brother 🙏🏼🤟🏼😎
So glad I got to see you rip the new rig around and put her to a true test 👊🏽👊🏽 just a little M2c love and the EXB will definitely be on a even higher level than it already is 👀
I got some tuning to do with my new lighter setup, but overall very happy the Xmaxx lost some serious lbs 😅😂
Can’t wait for the next one brother Rich!
Heck yeah Brother Dave 😜!!!! Had an absolute Blast out there with you as always Bro 🤗. Big props for winging it with your brand new setup. She was looking nimble with the 1717 👊. Bummed I missed recording some of your huge airs when I was wrenching. You'll have her dialed in with the settings for sure. Appreciate your help with hammer time 😂. The EXB took a pummeling, but M2C beef is hard to beat. Definitely impressed with how the truck performed overall 👍. So grateful we could hook up again. Looking forward to the next session Brother!!!! 🍻🚀🚀😎💪👊👊
They really hit a home run with the exb! Glad I got one. Been loving mine sent it over and over no issues at all! Bash on love the videos bro A+ !
Thanks so much Joel 😜. Congrats on your EXB Brother 😱. Great to hear you're loving yours. 😎💪👊👊
Another awesome high flying bash buddy loving that set up that rig really flies with it keep it up bro!
Thanks so much Brother 😜!!!! I'm very happy with this set-up 😍. Feels like she's geared right with plenty of power and perfect temps. Just need to tune the front and rear diffs.👌👌😎💪👊👊
Sick video as always buddy its never disappointing just got mine in the mail today servo is in shoe goo done just waiting on my max 6 1100kv combo and 27t pinion great bash man ✌
Thanks so much Brad. Congrats on yours Brother 😱!!!! Such a beautiful Big Beast 😍. I ran my K8s RTR with 1100 5687 Hobbywing with 28/47 gearing and she moved pretty nicely. 😎💪👊👊
@@richduperbash2966 thanks buddy quick? What's good gearing for the 39 t thanks
@@braddobbs3533 I'm not positive, but probably around a 24T 🤔. I would just takes temps regardless and aim for around 150F. Much hotter I'd gear down a tooth. 🍻
@@richduperbash2966 thanks man super appreciate it ✌
Great bash brother🤘💪👊👊 This truck seems like a tank. The abuse it can take. Keep the videos coming, enjoying every minute of it👍👍👏👏🤘🤘💪💪👊👊🔥🔥
Thanks so much Brother 😜!!!! I'm super impressed with it overall 👀. ARRMA definitely improved some key areas with this one. Hope all is well my friend!!!! 🍻👍👍😎💪👊👊
Amazing bash brother. That little 1717 did great in a big ol' xmaxx still looked like it could use just a bit more. Exb looks great and is flying well out there. Super stable
I really think the EXB Lineup was made for guys like you Rich. You love to tinker and make things you're own so it's perfect. A 30+ LBS RC Man that's a total beast. I'd kill myself with that. Been using Gorilla Tape on my Shells with some success, might have to change to your way I like it. Another great video from the Masher of The Bash!
Thanks so much Harry 🤗. These BIG rigs are a different kinda experience for sure 👀. I've hit myself before and you definitely feel it Brother 😱🤣🤣. You can end up on the ground if you're not careful. I will still use Gorilla tape sometimes, but have largely gone back to using shoe Goo cuz it's far stronger and lighter overall. Tried E6000 and several other ideas through the years, but the Goo has done the best over time. The EXB did fantastic considering her size and how harsh some of those hits were 👀. Looking forward to getting her 100% dialed in soon. 🍻👍👍😎💪👊👊
Hey really easy fix to stop breaking the blades is to put a small self adhering clear bumper that they use on cabinet doors. You can get them at home depot. Helps take some shock from the blades and has stopped mine from breaking. Used to go through one every bash. Also did the screen mesh to stop the small rocks from wedging in heat sync.
Thanks so much for the tip Brother 😜. Definitely going to try it out. I know the hard landings from height do a number on the blades. Gets old replacing them. 🍻🤙🤙😎💪👊👊
Fantastic bash there brother Rich.... Kraton 8s EXB is a beast. Props to Arrma for all the needed tweeks added for harder bashing. It's true not everyone is gonna send these to the moon like you so we gotta be realistic, WELL PUT, for those of us who get stupid M2C is there for the ridiculousness 😎👍💪💪
Killer triples with the big girl, I absolutely love that spot, Dave was killing it as well with his wild Xmaxx 😎
Rock on brother
#ArrmaTough #M2CTough #MitchLooperRocks
Thanks so very much Brother Dennis 😜!!!! Had such a Killer time out there again with Dave 🤗. This spot is about perfect for Big vertical airs and flips 😍. The headwind was harsh, but we made the best of it. Dave pulled some huge launches I missed while fixing the EXB 😝. Props to him for winging it before having his settings dialed in with his new Castle setup 👊. ARRMA did a brilliant job with the updates 😍. I'm loving this EXB 😱🥰🥰. M2C beef is still top dog for regular extreme use no question. Mitch's 7075 T6 is top shelf USA grade 💪. Really appreciate the kind words as always Brother. 🍻🚀🚀😎💪👊👊
This is the second video I have watched of yours and your laugh made me subscribe =) keep up the great work.
Thanks so much Adam 🤗. Really appreciate it Brother 🍻👍👍😎💪👊👊
Nice video brother 👍 and for a 30 pound truck I say it did great and the fact that you fix it in the field makes the day even better 👊 well done on the setup it handles well
Thanks so very much my Brother 🤗. I'm super impressed a 30lb rig can take this kind of punishment 👀. So happy I could get her fixed up and back bashing 😍. Truly appreciate it my friend!!!! 🍻🤙🤙😎💪👊👊
😮 Wow, you are really sending the ## lb of truck over the ramp... And the rig took it quite well. Sure, accidents happen and nothing is unbreakable, especially when send as if there is no tomorrow 😮 Arrma is really killing it with the EXB Models, they are just awesome. I am building an K6 EXB right now. 😘😘😘 Bash on!
Thanks so much dear Kimberly 😍. This first bash was fairly brutal. Lots of vertical airs with harsh flat and off angle landings. Very impressed with what ARRMA's done with this EXB 👀. We'll see how the chassis holds up long term. Accidents definitely do happen 😱🤣🤣. Excited to see your new EXB 6s build 😘😘😎💪👊👊
Nice Vid. Keep up the bashing. BTW I was waiting for the vid to come out of the new EXB 8s Kraton . The roller is definitely better than the rtr. 😃
Thank you Brother 🤗. Stoked about the beefcake parts ARRMA threw on this new EXB 😍. Clearly they listen closely to basher feedback and do what they can to keep improving. 🍻😎💪👊👊
Totally SICK first crack with Kraton8S EXB brother Rich. She looks absolutely sick under the sun 🌞. Plenty of beef part with this EXB but we know Mitch work still king👑 when it comes to extreme bashing. Glad the HS Servo is working out well for you. Max5 and 800-1100kv Is legit option system for this Beast. just absolutely love how the Kraton8S handle man. Killer ramp hits as always. Dave I Killin it with Xmaxx too! Awesome sesh as always brother. Stay safe and bash on brother
Thanks so much Brother Chris 😜!!!! I didn't plan on flogging her the first run, but this spot begs for Big sends Brother 😱🤣🤣. She did Killer considering the sideways landers and brutal vertical drops 👍. Huge props to ARRMA for the beefcake updates where they were needed. M2C will always reign supreme for max durability with extreme bashing 💪. So stoked Dave was available for this session Bro. He really never holds back and just stays positive all the time 🍻. Props to him for completely winging it with a brand new setup and no ESC tune 😱. Such a Killer fun time out there. Really appreciate it Brother. 🍻🤙🤙😎💪👊👊
Awesome video as always! The 1/5 scale exb is looking pretty strong.
This is Rich Duperbash Guys 😜💪💪 yeah brother as always very very nice test end extreme bashing, really a beautiful beast, and then the combo you have mounted is really powerful, it looks as responsive as a 1/8 👍👍 a greeting also to your crazy friend with the x maxx 😂😂💪😜 Good bash my friend
Thanks so much Brother David 😜!!!! Wasn't planning on an extreme first test run with triple BF's...etc...but it went that way out there with Dave and his XMaxx 😱🤣🤣. Such a Killer fun session, despite the breakage and high headwinds we were jumping straight into 🚀🚀. The 980kv Hobbystar feels great with this 32/39 gearing 😍. Loving the new Big Block tires too. They flip like Mad and are very forgiving. Appreciate the kind words as always my friend!!!! 🍻🤙🤙😎💪👊👊
@@richduperbash2966 it's a pleasure my friend😁💪, as soon as I don't have the possibility to mount the hobbywing max 5 I want to put the 32/39 coupling too, it inspires me a lot
Epic video once again rich like I always say ... you are the king of big air
Thanks so much Curtis 🤗. Really appreciate it Brother 🍻🚀🚀😎💪👊👊
@@richduperbash2966 hey rich , my buddy gave me a team associated rc8.2e , not as good as the Mojave but gets me rolling , how ever it needs an A arm , I am unable to find any here ......maybe if your at your local store see if they have a set and I will pay for them and the shipping lol kinda desperate now ha ha.
@@greatwhitenorthrc509 sorry Brother, my shop doesn't sell Team Associated. Lots of ARRMA, Losi, Traxxas, Axial....etc. 🍻
Great bash session appreciate the shout 🙌🙌👊👊💯💯
You bet Brother 😜!!!! Really appreciate the opportunity to test it out hopefully soon 🍻🤙🤙😎💪👊👊
This was awesome cant wait for a vid of the 6s and 8s launching to the moon together!
Thanks so much Moe 😜!!!! I did bring my 6s EXB but it got late and the wind chill plus skipping lunch had me ready to pack it up 😂. I'll be bashing them together very soon 🍻🚀🚀😎💪👊👊
Bad ass Rich!! Loving how the EXB tires are preforming 🤩 Chassis bent and B block already broken 🤣 Leave it to you for the Extreme Bash 💪💪 That 39t spur is magic even with the stock 8S system. I can't wait to drive mine more 😎
Thanks so much Brother Aaron 😜!!!! Yeah I flogged on her pretty hard 😂. Had some sketchy sideways landers and high vertical drops on that lumpy hardpack 👀. The tires are Killer!!!! Stoked about the shocks and links too 💪. So happy ARRMA went with a direct fit 39T spur option 😍. The chassis will not tolerate this style of driving for long though 🤣. M2C is the only solution as I see it. 🍻🤙🤙😎💪👊👊
Salut Rich
Sympa comme toujours ces un réel plaisir de regarder tes vidéos
À la la ill donne envie se Kraton Exb 8s ,equiper comme tu as fait et avec le nouveau châssis 7075 ,sa a l'air de bien tenir le choc ,vu se que tu lui fait subir...mdr
Aller Tchuss l'artiste
Congrats on the new 8s exb looks amazing. Such an awesome bash. I agree we can only expect so much with the trucks this big and heavy. Ive been nothing short of amazed and impressed by mine i can only imagine the exb with more beef. I think those shock are on my "need" list 😂 the rotations you where getting where nothing short of sick man. I hope they give the 8s backflips the exb treatment soon too cuz it would be awesome hahaha. I would love to still see an optional m2c chassis that would haveva widened rear droop section just for us running rpm arms. Could widen it and use the bottom of the arms for some sort of droop setting. Maybe be able to build it up there like the chassis stiffeners attach.thanks for another epic bash video man 🍻🍻🍻🍻🍻🍻
Thanks so very much Nick 🤗. I'm still in awe with these 8s rigs 😱🥰🥰. Never imagined sending rigs this huge like this and not having the wheels fall right off 😂. It's just incredible what ARRMA has done with this unique platform Brother. Some people get (head in the clouds) critical and say "it broke already"...."the arms are made of glass"...etc. Look at the big picture I say. This is bashing, stuff breaks. It's part of the hobby regardless of brand preference, loyalty, and all the online gibberish. For a rig this size and weight to perform so well is mind blowing to me 🙀. The fun factor is off the hook too 😍. I've had a set of front RPM arms on standby for a little while now, just haven't needed them. Kinda shocked I didn't break an arm with those rough landings this session 😂. That would be sick to see some EXB Backflips 👀. Mitch and Avery with M2C are all over new 8s upgrades. Expect to see beefcake driveshafts and outdrives soon. Their new screw machine will make any steel part on the truck plus titanium options. Pretty certain we're in for a stellar year of new stuff all around Brother. 🚀🚀😎💪👊👊
Great video brother!! It preforms great! Keep up the great videos!!
Thanks so much Roy 🤗. Much appreciated Brother 🍻😎💪👊👊
First time I see a 8s flying like a 6s! Awesome bash Rich!
Thanks so much Brother 😜!!!! I've been sending my upgraded RTR 8s rigs for awhile now 😍. Just have to land carefully given the sheer size of these Beasts. Got a bit squirrelly off the ramps with this one 😱🚀🚀😎💪👊👊
Hi mate. Just a suggestion try gluing stubby cooler rubber on the inside of the body above shocker tower to stop shockers damaging the body above shocker.
Thanks so much Armando 🤗. Really appreciate the tip Brother 👍. I usually use 1/4" thick self adhesive felt blanket from Walmart. It's designed to stick on furniture legs to protect floors or go under appliances. It's paper light, but acts like a helmet cushion during impacts. Usually use hot glue if it starts to loosen. Guess the principle is the same. 🍻🚀🚀😎💪👊👊
I would think it is hard to send any stock rig like that and not damage something. Both the Xmaxx and the EXB really took a beating and with little wrenching. As always man, Great video, you really make that 29 lb rig fly!!
Thanks so much Jon 🤗. So true Brother 👍. Sending these big Beasts puts some serious strain on the components no question 😂. Had a Blast with brother Dave and his XMaxx!!!! 🍻🤙🤙😎💪👊👊
I like the mesh idea over the fan, I'm always chewing them up 👍
Thanks Brother 🤗. Every bit helps for sure. I'm always finding little pebbles and sticks in my fans 😂. They still break from hard impacts, but I try to do what I can. 😎💪👊👊
Which stand is that again from home Depot? You mentioned it was a Ridgid brand?
Sick footage!
Thanks Robert 🤗. That's a Ridgid Flip Top from Home Depot. Thing is a life saver 😍
Rich “super fly “ Duperbash ! Nice work. 🚀🚀💯
Thanks so much Brandon 😜. Much appreciated. 🍻🚀🚀😎💪👊👊
Nice again mate!
Yeah it seems you found the limit of that giant rig in its current form, can't wait to see it fully tricked out!
😉🤘👍
Thanks so much Brother 😜. She took a pretty mean beating 👀. Our landing area was rock hard from recent tractor traffic too. She'll be getting some M2C 7075 T6 eventually. 🍻🚀🚀😎💪👊👊
@@richduperbash2966 sweet, m2c tough😅🤘👍
I can’t believe what a beating you gave that EXB lol you should do product testing for the US military hahahah Absolute madness Rich. Loved the video brother 😎🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Thanks so much Frank 🤗. The EXB took a serious flogging. Still shocked she took that sideways hit off the ramp into the mound 👀. Nothing is unbreakable, but she's pretty dang tough. 🍻🚀🚀😎💪👊👊
As you said tho most of us ain’t going to literally launch them like 40ft into the air 😂😂 I just got my exb still gotta put it all together there’s no way I would jump mine like that after spending so much money on it 😂😂
Nice run as always bro 😎. Thanks for sharing the great info on this beast 👍 . I have one of them rigid stands . Purchased mine from Home Depot 2years ago .there Great for 1/5th scale cars . Hope you and your family are all well 👊☺️ stay safe brother.
Thanks so much Brother 😜!!! Really wish I'd gotten the Rigid stand sooner 😂. I've tweaked my back a few times wrenching on these 8s Beasts and even the smaller rigs all hunched over. Hope all is well with you also my friend 🤗👍👍😎💪👊👊
@@richduperbash2966 all is well bro thanks for asking . Stay safe and keep on bashing 🍻 ☺️👊😎
Great bash brother!!! curious where you got that adjustable heat sink??? I need something for mine running 800kv in mine going to 39 spur after I get some fans in
Thanks so much Jonathan 😜. I got my heat sink from Gamechanger RC. Not sure what brand it is 🤔. Think he sources them to build fan kits with. He's available on eBay for messages...etc. 🍻😎💪👊👊
Thank you sir .keep bashing big 🙃👌🏼
Thats truck is sick, I thought my 6s exb was a beast but the 8s exb is a monster
You’ve convinced me! Buying one tomorrow. What’s that stand you said you bought at Home Depot at min 9:21? I didn’t catch the name of it.
Thanks in advance!
That's awesome Jay 🤗. The stand is a Ridgid Flip Top. Just add a pit mat to the top to keep the rigs from sliding around. www.ridgid.com/us/en/flip-top-portable-work-support
Rich im a huge fan of your channel . I have a very similar build on the K8S EXB, I’ve been using the HW 800KV with 34/34. It only been 55degrees here and even after 15 mins bashing I’m hitting 170 temp on motor . I recently got my hands on a HOBBYSTAR 840KV , I know this is one of your favorites with 1:1. Can you tell me have you heard of guys running hot with the HW 800 in this heavy rig ? Also is it true the HS 840 makes more wattage than the HW 800. I see you run your setup flat out a lot with hitting 170 on a 90 plus day. What is the secret. I hate to run fans but if I have too , love 1:1 Thank you for any help you can give me. Keep up the great videos .
Hey Kris 🤗. I've heard several instances of the HW 800kv getting hot on 1/1 gearing and I'm really not sure why 🤔. Obviously wheel size/weight, mesh setting, bearing health, and driving surface/style are all factors. Not sure how the wattages compare with Hobbystar, but I haven't had overheating issues with my 840kv or 980kv with proper gearing. 😎💪👊👊
Yes! Been waiting for this one!! 🍿
Hi there! Great bashing man!
I have the K8S EXB and im also kind of new to the hobby..
But one thing i noticed is that the front wheels are balooning like crazy.. will this balooning stop if i put ear plugs in the center diff? Im affraid that i will explode the front tires.
Thanks Brother 🤗. Yes.... Silicone ear plugs in the center diff definitely helps mitigate power bleeding to the front wheels on harder throttle. These new Copperhead 2 Big Blocks are going to balloon no matter what, but the ear plugs certainly help. The smaller Outcast 8s Backflips also balloon, but not as radically having less rubber and mass. 🍻😎💪👊👊
Damn that Chassis is bent... cool video dudes... I have the same XMaxx from like your buddies Cheers..
Thanks so much Brother 😜!!!! She took a beating for sure 😱🤣🤣. Had a blast out there with Dave and his XMaxx. 🚀🚀😎💪👊👊
Fantastic video. Wish I had somewhere even remotely that size where I'm from to take my cars. If I was to go for just one of these which would you recommend the exb or the xmaxx?
Thanks so much Cliff 🤗. Definitely grateful to have this spot for now 😍. Soon they'll be houses going in there. The EXB and XMaxx are completely different rigs. Really depends on whether you want more monster truck or monster truggy. The EXB is bigger and heavier no question, but it also handles much better. Boils down to preference mostly. 2 completely different designs. 🍻😎💪👊👊
What you said in the video Rich it's very important to be realistic about the truck being that big, and how much it can handle.
Thanks so much Brother 🤗. I truly meant that and appreciate you recognizing it my friend. 🍻😎💪👊👊
super! 🤩I just got one, I will mount max 5 with 800kv motor do you recommend 39/39 pinion?
Dude you really have to get an Xmaxx! Nice video!
I’d really like to see what rich does with an xmaxx. Rich puts together the toughest rigs hands down
Rich,nice bash💥💥💥excellent video bro👍!
Thanks so much Brother 🍻😎💪👊👊
Great Bash Rich, is it just me or was the Kraton leaving the ramp slightly rotated/twisting? Makes for hard landings, you did really well in the wind and under attack from Dave. Great to see you having fun with a mate, thanks for your continued hard work. Take care.
Thanks so much Brother 😜!!!! Yes indeed on several off camber rotations 😱. The internal framing on my plastic ramps have started failing 👀. One of the ramps is springing more than the other under compression. It's spreading downwards from side to side. That plus the bigger tires and wind was bucking her off axis big time 👀. Been trying to get new ramps, but these are basically discontinued and I can't find suitable replacements. Definitely makes air control and clean landings far more difficult. The other thing is these Big Blocks. They flip WAY faster than I expected 😂. Never seen anyone pull easy triples with a Kraton 8s. That's going to take a run or 2 to adjust to. The wheel mass is pretty touchy with this 980kv setup. 🍻🤙🤙😎💪👊👊
@@richduperbash2966 you did so well keeping things on all fours for the landings, I know I would have gone home with a bunch of parts and not a complete rig. Good to see Arrma working on those tyres, hope you get used to them quickly, do you think the wheel has been redesigned or will the thicker rubber help the wheel to remain intact?
Thanks for the reply mate, I don't always like to comment because I don't want to take up your spare time, I was just really impressed that you were able to straighten things out after the take off's.
Take care and have a great weekend coming up.
@@jonowillmer thanks so much Brother 👊. I do my best to land cleanly, understanding how these rigs take damage. The Big Blocks seem to have a beefy carcass. No signs of stress at the glue beads 👍. The foams feel firm, yet have nice compliance. Very forgiving tires thus far. Just have to be mindful of the mass because they correct very quickly midair 😱🤣🤣. Appreciate your comment Brother. Have a great weekend too!!! 🍻
this is so fair i was waiting for this
Thanks so much Brother 🤗. Had a great time out there 😍. Overall, I'm super impressed with the EXB!!!! She took a mean beating at this rough spot. 🍻👍👍😎💪👊👊
@@richduperbash2966 yeah you really gave it a hard bash test ✌️😂 also you covered all the points appreciate your effort dude well done
@@UAERCADDICTS thank you Brother 🤗
@Rich Your aerial skills are on another level. I’d never think that you could fly the 1/5 Kraton just like the 6s. Gotta ask you what Transmitter/receive combo do you run? Amazed at your control skills! SUBBED!!
Thanks so much Scott 🤗. I'm still amazed this Big Beast can fly so well 👍. I'm running the old Tactic TTX300 controller/reciever that use to come with all the ARRMA's. It's simple, but responsive with great range. I've always liked the ergonomics and spring tension. There's much better units of course, but I don't need or want anything too fancy. Really appreciate the kind words Brother. Happy bashing. 🍻😎💪👊👊
Just bought one last night. Going from a Maxx 4s to this. Not sure if it was a great idea but hey why not?
Congrats Brother 🤗. These bigger rigs are a totally different experience. Super fun on huge terrain. 🍻😎💪👊👊
@@richduperbash2966 Heck yes! I’m stoked.
Dammmm what a nice durability test I liked how they sent the xmaxx too with no remorse lol what voltage do you run your steering servo at awesome video rich
Thanks so much Robert 😜!!!! Dave doesn't hold back with his XMaxx 😱. I missed catching his biggest jumps while I was fixing my rig unfortunately. He was trying to adjust his ESC settings on the fly. I'm running 7.4 volts BEC on my Max5. 🍻🚀🚀😎💪👊👊
Right on bro! 8's anything is insane. After much abuse love my exb 6s
Just what I expected to see. Your hands at the control of that beast results in fast paced, high flying, controllable skilled action🔥 Glad to see the rod ends and shocks held up too. I see an M2C chassis coming for you😛 for the added durability especially the way you send it. The King looked like the King out there haha. Good stuff as always my man💯
Thanks so much Brother 😜!!!! Very impressed overall with this new Beast 👀. Has an absolute Blast out there breaking her in and pushing her to the brink. Definitely will be getting an M2C chassis at some point. Just makes sense for the driving I enjoy most. Appreciate the kind words as always Brother!!!! 🍻🚀🚀😎💪👊👊
Great video. Love how you pushed it close to its limits. Honest opinion, which one would you pick. EXB Kranton 8s or Losi DBXL-E 2.0?
Thanks Jimmy 🤗. Not sure on this vs the Losi DBXL-E. Haven't owned one to really give a good, solid opinion. They look awesome and I've heard great things about them. Just think they're quite a bit different in comparison 🤔. Haven't seen anyone doing huge jumps with theirs, but it sounds like they're built well and guys really like them overall. I know they make aluminum upgrade braces...etc.. for the Losi too. 🍻😎💪👊👊
So Rich, dope video brother, quick question. Do you recomend the new "big block" factory tires for bashing over the Duratrax Hatchet Xs' or the Powerhobby Raptor XLs?
Thank you Brother 🤗. I'm really liking these new Big Blocks 😍. Very forgiving with nice lugs 👌. They flip like Mad too 👀. I like Duratrax, but they're pretty stiff and bouncy and I cracked a hex in my Six Packs. Haven't tried the Raptors, but think they're too big for my liking. 🍻😎💪👊👊
What is the reasoning behind thicker fluid up front? Doesnt that increase turning radius?
Thicker fluid slows the natural transfer of power to the inside wheel in turns as the car leans outward and the inside wheel lifts. Basically, you can rip out of turns with thicker front fluids, instead of having the inside tire ballooning and wasting power. It slows initial turning slightly, but is far better for going fast with maximum traction and control. 🍻😎💪👊👊
I bent my Kraton EXB into a chicken taco at the skate park in the first 5 minutes. I need an m2c chassis. The stock one can't be 7075 as it scratches too easily with the hardness tester. But boy is it fun as you obviously know from the insane dolphin-like acrobats you do, lol.
M2C is the answer Brother 👊. Unfortunately, the EXB likely uses 7075 T-0 (cheap Chinese grade). It's no where near as strong as true 7075 T6 sourced in the U.S. Skateparks are harsh on any RC, but M2C will take it. 😎💪👊👊
Rich which radio do you prefer running? Was not sure if you ran different radios on your bashing rigs and racing rigs or the same one. I was trying to debate if I want to spend the money on a nice radio and use it for everything or just get something for bashing with the EXB and continue to have a radio per truck.
I really only run cheaper, simpler radios. Mostly use Tactic TTX300 for the reliable range and responsiveness. The newer Spectrum SLT 3 isn't bad either. Basically have to have separate radios cuz my kids and friends often drive my rigs with me too. 🍻
@@richduperbash2966 Rich thanks. Yeah did not think about that to much at all regarding kids and friends coming over. Good points for sure to keep in mind.
What pinion gear brand would you recommend for my EXB build? I assume Robinson Racing but that is just me assuming. Also what gearing do you prefer and run in your cars?
That thing is insane, that hobbystar motor makes that thing haul, id say give it a short while and we'll see stronger hingepins
Thanks Brandon 🤗. I think the pin bent because I busted the suspension mount, didn't realize it and kept launching her 👀. It's possible I caught the mount on the ground or a rock too. No biggie. Bash, fix, repeat. 🍻😎💪👊👊
@@richduperbash2966 yeah, most likely, it took alot of bashing though, atleast youre not snapping lower arms already, im hoping to work on my reeper build in the coming weeks, maybe some dboots on 24mm hex in there
@@richduperbash2966 gotta start by getting a new esc, toasted my 150a using my leopard hobby 4082
Putting it to the test.. awesome big air as usual.
Thanks so much Brother Phil 😜. I think I was a bit harsh on her this first run. Super impressed with how she performed 🍻🚀🚀😎💪👊👊
Hey Rich,
Have those 7 mm shock shafts gone into production yet?
Thanks
I think Mitch is about done sorting the first batch 👀. Him and Avery did a couple small tweaks on the prototype ones to add absolute maximum strength 💪. I'm working today, but I'll try to check in with him about when they'll hit the website.🍻 😎💪👊👊
@@richduperbash2966 thanks man
@@seanmccormack5888 Mitch has all the parts ready to go, just needs to get them packaged up 😱. I'd check the website starting this week 👀
@@richduperbash2966 thanks Rich , one more question bud 🥴 what his website?🥴🥴
@@richduperbash2966 found it 🥴
Nice vid as allways bro!
Thanks so much Brother 🍻😎💪👊👊
i was considering selling my k8s to get this exb, i dont think i will solve any problem after seeing kev's n ur vid here rich 😂 very good video i love the xmaxx colored theme🔥🔥🔥
I wouldn't sell my K8s either Brother😱. It's an absolute Tank with the M2C chassis and other tidbits 💪. Overall, I am impressed with all the other changes 👀. The tires, shocks, links, rod ends, and motor mount all held up phenomenally well considering the harshness of this first test. The chassis simply isn't aftermarket level. It can't and won't handle the same abuse I've grown accustomed to putting my other 8s rigs through. It would probably fair better with moderate use. Trying to think objectively as many people don't do huge sends...etc. It definitely puts Crazy and sometimes unreasonable strain on components. 🍻🤙🤙😎💪👊👊
What a beast!!! N.1 my friend 😉💪🏻💪🏻💪🏻
Thank you Brother 🍻😎💪👊👊
Great video 👍🏾Wheels/Tires seem taller and wider. Will they retro fit the prior K8s?
Thanks Brother 👊. These Copperhead 2 Big Blocks will fit any ARRMA 8s no problem. 🍻😎💪👊👊
Awesome video Rich what motor are you using I doubt between 1100kv and 800kv??
I was running my Hobbystar 56112 980kv with 32/39 gearing if I recall correctly. I'm back to running my 840kv with 34/34 at the moment. 😎💪👊👊
@@richduperbash2966 okay witch is best the hobbywing 800kv then or the hobbywing 1100kv motor?
I mean what would you choose?
@@rcmelfish9787 I honestly wouldn't run either Hobbywing in the Kraton 8s. The 1100 5687 is too small from past experience with it in my K8s RTR. I've also heard too many guys online have had heat issues with the bigger Hobbywing 800kv 🤔. Personally, I'd recommend either the 840 or 980kv Hobbystar. Both have done excellent for me and they're cheaper than the Hobbywing last I checked. I get mine from RCJuice.
@@richduperbash2966 okay thx man I'll check it out
How do I make it so people can comment on my videos my hobbywing max6 don’t beep with I turn it on it flashes the same amount of times for what ever lipos I use in there but no beep noise any ideas mate
What was the 39t pinion on the kraton 8s you mentioned it in a different video
Not exactly. I started using a 39T Limitless spool gear as a spur earlier last year. Fortunately, ARRMA now offers a direct fit 39T optional spur gear in the box with the EXB. 🍻😎💪👊👊
@@richduperbash2966 you use it for a pinion too right?
@@huntire6861 yes indeed. I run 2 Limitless gears 34/34 pinion/spur gearing with my beefcake M2C Kraton 8s with 840kv motor and was running 34/39 gearing (pinion/spur) on my Outcast 980kv, all Limitless spool gears. 🍻
Really nice💯 and sturdy💪 big rc bro!😎 I'm also i 8S EXB test👊👊 The front chassis is bent a little😱
Rich I need sone advice please I am going to run the 800kv Hobbywing combo but I’m not sure on the gearing and pinions are a bit hard to come by here so I’m going to order from overseas. So what gearing would you recommend? Thanks 👍
I would run 1/1 gearing. Either 34/34 with Limitless spool gears or 39/39. Not certain what the stock ARRMA mount will accommodate. 😎💪👊👊
@@richduperbash2966 Thankyou 👍👍
Having problems with gearing here so might have to rethink my motor choice I can get 30t pinion max so what motor would you recommend please ?
@@grumpygrandpa3640 probably an 1100kv. My Kraton was quite fast with the smaller 5687 Hobbywing with 29/47 gearing. Castle and Leopard both offer larger 1100kv options if you want more power/torque. 🍻
@@richduperbash2966 awesome stuff thanks dude 👍👍
It’s a Beast. Definitely some hard sends. Stuff is definitely going to break on the hard ground. It took it pretty well.
Thanks so much Brother 😜. You're exactly right 👍. The ground was wicked hard in our landing area. Breakages are just part of the deal. She took some brutal hits and hard sideways landings 👀🍻😎💪👊👊
@@richduperbash2966 yeah she did. You have video proof. 😂
Nice video, with some crazy driving skills and the XMAXX also.
I been hearing run times are short ...
What kinda run time on what batteries should be expected ?
Thankx in advance !
Run times aren't bad. Just depends on electronics, packs, and driving style. I get probably around 15-20 minutes using Zee 7200mah 80c packs. That's with pretty heavy throttle use. I often stop before LVC as a habit (3.7-3.8V). Don't like having power loss mid-air 😱🤣🤣😎💪👊👊
I love my 8s EXB but this truck is not as tough as advertised. I don’t send my truck at all but I still blew out my rear diff..
My guess is it wasn't assembled correctly from the factory or didn't have enough diff fluid. Gear failures are extremely rare with the platform so long as the diffs and bearings are properly assembled and maintained.
@@richduperbash2966 Thanks Rich you’re the best
Hey rich. Are you happy with 32/39 gearing? I will use the hobbywing 800kv. I will start with 34/39 and then 39/39
Hey Brother 👊. I'm happy with 32/39 for this 980kv setup so far 😍. I would probably go straight to 34/34 or 39/39 with the Hobbywing 800. Running 34/34 with my 840kv Hobbystar in my RTR K8s and she Rips. 🍻😎💪👊👊
@@richduperbash2966 is there any difference if i use 34/34 or 39/39?
rich - do extenders affect gearing? 1 inch.....
Not sure if you mean hex extenders 🤔. That shouldn't affect gearing. Just balance/stability and turning radius. 🍻
Rich question for you as I am new to the Arrma scene and been 15 year hiatus from RC until this past month when I picked up a Maxx. Now I am looking at the Kraton 6S or EXB. I was wondering what are your thoughts on the Spektrum ecosystem? I dont know much and seem to get mixed results from my searches and video watching (people love it or hate it). If I am wanting the real time telemetry like Traxxas provides with there IQ setup am I stuck with Spektrum or could you get the same effect using a Sanwa or Futaba transmitter with the correct motor/esc pairing?
Other thing is would you recommend getting the EXB and building it out or for me to get the RTR and then just upgrading parts as things break? I was leaning towards the EXB and then putting in either a Spektrum Firma 160 Amp Sensorless Brushless Smart ESC & Motor Combo (1250Kv) or Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor since it gives me the head room to go 8S down the road.
Hey Donnie 🤗. Pretty certain you can pair a non Spectrum controller with the reciever/ESC and still have telemetry functions 🤔. I haven't had a true need for any of it personally. You could go EXB or RTR really. The EXB has some nice upgrades, but the chassis is nowhere near as strong as M2C Racing 7075. Ditto for the towers or chassis braces. The Castle system will outperform the 1250 motor on 6s. I can't recommend 8s with the 6s rigs for bashing.🍻😎💪👊👊
@@richduperbash2966 Rich thanks for the feedback, I was binge watching your videos and trying to learn more and more. I am kind of leaning towards the EXB since I figured maybe it has some better upgraded parts that you are not upgrading with M2C stuff. But then also thought well could just get RTR and just replace the stuff on there with M2C. Real world problems I say LOL. If I did the RTR route other than the chassis, towers and chassis braces (which would be candidates even for the EXB) are there other items that need to be replaced but don't on the EXB because they are better on EXB?
The telemetry stuff is just really really neat and fun to have all the data and be able to look and see it. But I just know what I know from getting back into it finally with the Maxx and the Traxxas IQ stuff. However not sure if it is actually useful or just fun nice to have data.
@@DonnieKluck most make the EXB vs RTR decision with electronics also in mind. If you have spares laying around, the EXB makes more sense. Obviously, the EXB has LSD diffs. I'm fine using standard shimmed diffs myself. Because the V5 now shares the same EXB arms and geometry, I think that's an added consideration for starting with the RTR and upgrading as you go.
@@richduperbash2966 Rich thanks, I have seen that as well and been considering that just because I am getting back in to the game. Also thought maybe if I try to build out a RC can start getting a better electronics as far as transmitter goes for future cars. But it is good to know that if I went with the RTR there isn't way to much much difference between the two.
But man trying to figure out how to build out the EXB is a lot more difficult or time consuming than I thought. But think it is mainly just trying to find out what you actually want to put inside it and keep second guessing anytime I think I figured it out LOL
BTW so you have to get clearance with the FAA since you're launching your Kraton into orbit everytime you go out to bash 😂
Great great vid man - love it 👍😊😎
Thank you Brother 🤗🍻😎💪👊👊
I need these shocks 😂The rod ends are my biggest problem with the stock RTR!
Most definitely Daniel 😜. The RTR rod ends look 1/8 scale compared to these EXB ones 😱🍻😎💪👊👊
This thing is awesome but I have a hard enough time moving my xmaxx around being im in this damn wheelchair lol probably won't get this heavy rig but its nice to watch others bash it! For now ill stick to my "light" xmaxx lol bash on brother!
Thanks so much Todd 🤗. I'd honestly feel the same. This rig is noticably bigger and heavier. I'm quite careful loading and moving her around 👀. Already tweaked my back and wrists a few times. Happy bashing my friend.🍻😎💪👊👊
And what type of motor are you running is it 980kv or 780kv because all I can find for the hobbystar is the 780kv 56112 motor. And what pinon would be best for off road for the 780kv motor. Thank you.
I'm running the 980kv with Max5 and 32/39 gearing 👍. I would try the 780kv with 1/1 gearing. Either 39/39 or 34/34 using Limitless spool gears. The lower kv motors have to be geared tall for good top speeds. 😎💪👊👊
@@richduperbash2966 Thank you
That's awesome!!!
Where are you driving? I just got a kraton from fast track today. Id love to rip those jumps.
This spot is off Crocker and 12st not far from Sac City college. 🍻😎💪👊👊
@@richduperbash2966 much appreciated bro. Would be cool to meet up an bash. I looked up kraton an seen you bashing at the bike jumps.
What Servo do you use for the 1/5 kraton and also I’m looking at doing a Servo upgrade for my 6s talion?
I run a Power HD 23kg WP in my 6s rigs and a Hobbystar 6912 HV in the 8s rigs. Just have to add an extra M3 spacer to the servo saver adjustment screw and use the ARRMA 8s larger replacement servo tray. 🍻😎💪👊👊
That’s awesome how you said be realistic because of the size and girth of the 1/5 size. Then you send it to the moon, further then I would send my 1/8 kraton. Awesome so see someone who drives a arrma on YT
Thanks so much Brother 👊. I was still gonna bash how I like, but many people are unrealistic and think these trucks won't break 👀. Just trying to convey some ownership regarding breakages. If you spike any big rig into hardpack, you have to own it. 🍻😎💪👊👊
Quick question I’m using Spektrum 14.8V 5000mAh 4S 50C battery on my kraton 8s but it seems to give out a lot I’m thinking about going with another brand any recommendation on the best batteries to put in a kraton 8s I look for batteries on Amazon that people have recommended on UA-cam but all I see is bad reviews it seems like on Amazon it’s a hit or miss
Hey Martin 🤗. I've had good luck with my Zee 7200mah 80c 4s hard packs. Also had good luck with Hobbystar and Yowoo graphene packs. Just have to be careful with Yowoo that the size dimensions are correct for the truck. I think 5000 50c is too small for the power draw of these big Beasts 😱. I'd recommend atleast 6500-7500mah 75c+. 🍻😎💪👊👊
Thanks bro I appreciate it
Rich where are you from? I get a very gnarly bro, surfer kinda vibe coming off ya, which is pretty sick tbh 🤣
I'm from Northern California Brother 🤗. Near Sacramento now. Spent more time on a skateboard, but love the ocean too 😍🤙🤙😎💪👊👊
@@richduperbash2966 grew up Gulf Coast so i HAD to skateboard. our biggest waves were during hurricane season. before you ask, yes we did. 🌬️🌀🌊🤙🏼🏄😂
Talk about beast!!!💪💪🚀
Is the 8s Exb chassis more or less stronger than the m2c chassis?
The M2C chassis is stronger no question 💪. Mitch uses a top shelf US grade 7075 T6. It doesn't get any better. 🍻😎💪👊👊
Ok can you please tell me what is the name of the stand your using! I got tired of reading to find it!
That's a Rigid flip top from Home Depot. Let me send you the link. www.homedepot.com/p/RIDGID-Flip-Top-Portable-Work-Support-AC9934/100618242
@@richduperbash2966 thank you got the last one! Only problem I see is it’s slippery! Got to get something to put on it!
@@ikey4ya yes indeed Brother 👊. I used yoga mat (same as an RC pit mat) and fastened it to the top surface to keep the chassis's from sliding off.
@@richduperbash2966 thank you!
@@richduperbash2966 I got the yoga mat from Walmart 8.88 and had plenty left over! Now it stays in place! Thanks again!
Mate I love the 1/8 size not to big not to small but the 1/5 are just to heavy and to easy to damage hahaha. Enjoy mate love your videos as usual 🤣👍👍👍
Thanks so much Brother 😜!!!! The 1/8 size is my overall go to basher 😍. Very true about the size 👀. Definitely have to bash these huge 8s rigs with the mass in mind.They won't take nasty hits like the smaller rigs. Think it's just physics really. Pushing these bigger Beasts is a different kind of experience though. I find it pretty addicting 😱🤣🤣🍻
@@richduperbash2966 yeah I thought so mate hahaha.
Which one do you prefer for your overall best/ funnest basher? 6s or 8s?
That's tough Franky 🤔. If I could only have one I'd say the 6s. That said, the 8s is a different type of thrill and absolutely hammers bigger terrain 😱. Both are mad fun. The 6s is faster, more agile, and has the durability advantage from a total mass and physics standpoint. 😎💪👊👊
Do you think this EXB can handle the 34/34 set up that you were running in your RTR?
Most definitely with the Hobbystar 840kv 56112 🍻