tldr; plug in usb > press rst > press boot > release rst > release boot > press flash on the web flasher > select the com port and off to the races. Thanks for the great video.
Thanks. I've been fiddling with my Supreme for a few days. Turns out that part of the problem was that the buttons shown on the ref sheet i was using had them labeled wrong.
Well part of the problem is that my T-beam has the boot button labeled wrong. Just the picture you had with the boot button labeled correctly fixed my issue. Props 👍🏻
After messing around a bit with a battery in it, I've realized that if held the boot button will shut the t-beam down and if you hold the power button down it shuts the screen off to conserve power, but will wake if it gets a message.
these videos are great thank you!!! i see you are using the deck, echo and beam, as am i as i have been following you, but my echo's dont want to play on the mesh well, they show up as nodes to each other but none of the other devies see them. they are all on the same firmware, so i can't figure out where to go from there.
yes this doesn't work... with the boot and rst buttons? anyone know of any other video he doens't show the actual pushing buttons part. NOT Useful. sorry...
Turn it off ( middle button - on-off ) While holding simultaneously both user button / on-off button ( left and middle buttons ) plug the usb-c cable Hold for 2-3 seconds. The screen should remain black Flash
Ok, your device must be different then mine. USB connected, press and hold reset, press and hold boot, release reset and boot. Then select flash after you have selected device and firmware. I have used this method six times and it works each time. I created another that hopefully does a better job demonstrating the process I use. Thanks for feedback.
@RavenwoodAcres ok, thank you. Most of them seem to have soft rf on them so I think I just have to re fresh them. Just wish everything wasn't out of stock. I found some of the t beam Supreme on ebay but due to chinese New years it's going to take FOREVER for anything to ship out.
tldr; plug in usb > press rst > press boot > release rst > release boot > press flash on the web flasher > select the com port and off to the races. Thanks for the great video.
Thanks this helped me figure out how to do this at 3:23 am
Glad I could be of assistance!
Thanks. I've been fiddling with my Supreme for a few days. Turns out that part of the problem was that the buttons shown on the ref sheet i was using had them labeled wrong.
Well part of the problem is that my T-beam has the boot button labeled wrong. Just the picture you had with the boot button labeled correctly fixed my issue. Props 👍🏻
After messing around a bit with a battery in it, I've realized that if held the boot button will shut the t-beam down and if you hold the power button down it shuts the screen off to conserve power, but will wake if it gets a message.
Awesome got it up and running thanks
Thanks, cheers from Sweden 🇸🇪
Thank you, cool user name.
Good video.
Thanks!
these videos are great thank you!!! i see you are using the deck, echo and beam, as am i as i have been following you, but my echo's dont want to play on the mesh well, they show up as nodes to each other but none of the other devies see them. they are all on the same firmware, so i can't figure out where to go from there.
yes this doesn't work... with the boot and rst buttons? anyone know of any other video he doens't show the actual pushing buttons part. NOT Useful. sorry...
Turn it off ( middle button - on-off )
While holding simultaneously both user button / on-off button ( left and middle buttons ) plug the usb-c cable
Hold for 2-3 seconds. The screen should remain black
Flash
ua-cam.com/video/vrZiWjLFbcE/v-deo.html
Yes I fiddled around till I got the combo working.. THANKS Tho... SO NOW THUMBS UP... heheheheee😁
Ok, your device must be different then mine. USB connected, press and hold reset, press and hold boot, release reset and boot. Then select flash after you have selected device and firmware. I have used this method six times and it works each time. I created another that hopefully does a better job demonstrating the process I use. Thanks for feedback.
@@KT0DDW Holy shit finally something that works thank you.
Case is sold out :-(
Yes, unfortunately, however, Rokland is pretty good about getting products back in stock.
So is the mesh vs the soft rf the same just want software it comes with? Can the soft rf be used as a mesh?
That is my understanding from what I have read. I don't own one with SOFT RF.
@RavenwoodAcres ok, thank you. Most of them seem to have soft rf on them so I think I just have to re fresh them. Just wish everything wasn't out of stock. I found some of the t beam Supreme on ebay but due to chinese New years it's going to take FOREVER for anything to ship out.