Great build man. I can’t stay of my Mega Moto 79cc. I try and ride it every day. I did use the Gopowersports engine plates so I could use a torque converter. Way too much fun. Even more with the 212. Wheelie monster..😂
My MM80 arrives today, looking forward to getting it ready for the 79cc Harbor Freight Engine that arrives tomorrow... Will be for my daughter, 10 years old, and I'm getting the MM212, with a 212cc HFE! Fun shall ensue...
My Coleman only goes 32 with a pred 212 w pipe and air filter. It’s a b200r frame tho wayyy heavier. It’s my cruiser. All that to say the 79 is solid 😂
I did 212 predator swap on my mega moto 80cc frame you just gotta have aftermarket air filter and exhaust to fit it better and grind one of the 2 oil drain plugs off
Little late... But the adjustable motor mount for the predator 212 also works for the predator 79 because they are both Honda clones and the mount is designed for Honda clones
This is directly from go powersports in the description for that mega moto. "Stock motor mount plate will only accommodate the stock Mega Moto 79cc Engine (no longer available). If planning on mounting a 79/196/212/225cc Honda Clone engine, then we recommend our Mega Moto Fully Adjustable Motor Mount Kit which is a bolt-on item. No cutting required."
I'm assuming the predator 79cc engine has better torque and speed than the stock one on these which I bought off market place it runs great have had problems mostly clutch gor everything fixed but been trying to mod it to faster I got mine up to 31 mph stock and I'm a bigger guy taking a metal wire hooking it to the governor lever and to the other lever where the spring connects it worked Today but it started taking off and when I was driving it wouldnt stop had to hit the kill switch I'm pretty close to getting it right I have a few other ways to fix it so I can go 31 to 35 without that issue my dad thinks putting a few holes on the governor lever then rehooking the spring would make it back off less without making it take off etc right now on flat it goes up to 26 I had it going 27.8 before messing with it more than I did I hope I get it faster because it's fun comfortable but not for long it made for 16 year Olds and up.
Around the property it’s about 20-22mph. I might just have to take her to the main road and see! I’ll let ya know! Update: I was way off!! 33mph on the open roads. Held 30ish most of the time. Very impressed!
Get the clutch and chain installed, align the chain and then mark where the mounting holes are on the engine plate with a marker. Making sure the chain is straight is the most important part.
You'll want to start with the existing front two holes that line up and then you can mark the rear holes for the engine and slot them if you need more adjustment.
Great build man. I can’t stay of my Mega Moto 79cc. I try and ride it every day. I did use the Gopowersports engine plates so I could use a torque converter. Way too much fun. Even more with the 212. Wheelie monster..😂
I added a 30 series TC and Wow what a difference for a yard bike! Great video!
I've been wanting to toss one on our bike, works well huh? That's exciting!
SO MUCH FUN!!! Great Video!
Awesome stuff budd love the endless project you have around and your safety gear flip flops 🩴 keep sending it !
That ef is clean asf love all the builds 🤟🏿
Thanks! And thanks for watching! 🤘🏼
My MM80 arrives today, looking forward to getting it ready for the 79cc Harbor Freight Engine that arrives tomorrow...
Will be for my daughter, 10 years old, and I'm getting the MM212, with a 212cc HFE! Fun shall ensue...
Im building a cc100x . I was thinking about the 79cc predator. That 79cc hauls ass for its size. Very impressive bro 😎👍
I got mine to 27 yesterday no gov delete all stock with a doodlebug frame. I weigh 155. Not too shabb
My Coleman only goes 32 with a pred 212 w pipe and air filter. It’s a b200r frame tho wayyy heavier. It’s my cruiser. All that to say the 79 is solid 😂
Nice vid man I’m gonna get this frame this Christmas and put a 208cc Briggs and Stratton on and see how it does lol
I did 212 predator swap on my mega moto 80cc frame you just gotta have aftermarket air filter and exhaust to fit it better and grind one of the 2 oil drain plugs off
Good to know! The fuel tank fit though? A Tilly or Ghost would be terrifying on this bike 🤘🏼
@@RuckusGarage you have to use a funnel to get the gas in it barley fits
i got the motovox with monster moto upgrades love it compared to your other bike which one is more comfty
The Coleman for sure. Those big balloon tires aired down are comfy. I think a full suspension with big tires would be the GOAT for comfort
@@RuckusGarage lol just drill the fuggin holes lmao 1,666
Little late... But the adjustable motor mount for the predator 212 also works for the predator 79 because they are both Honda clones and the mount is designed for Honda clones
The billet one or the stamped steel? I have the steel GPS adapter, just haven't tried it yet
the billet one offered by go powersports...Mega Moto 80/105 Adjustable Motor Mount Kit
This is directly from go powersports in the description for that mega moto. "Stock motor mount plate will only accommodate the stock Mega Moto 79cc Engine (no longer available). If planning on mounting a 79/196/212/225cc Honda Clone engine, then we recommend our Mega Moto Fully Adjustable Motor Mount Kit which is a bolt-on item. No cutting required."
Did you only drill the holes or did you cut some other things? Could you make a video about how you drilled the holes for the bracket?
I'm assuming the predator 79cc engine has better torque and speed than the stock one on these which I bought off market place it runs great have had problems mostly clutch gor everything fixed but been trying to mod it to faster I got mine up to 31 mph stock and I'm a bigger guy taking a metal wire hooking it to the governor lever and to the other lever where the spring connects it worked Today but it started taking off and when I was driving it wouldnt stop had to hit the kill switch I'm pretty close to getting it right I have a few other ways to fix it so I can go 31 to 35 without that issue my dad thinks putting a few holes on the governor lever then rehooking the spring would make it back off less without making it take off etc right now on flat it goes up to 26 I had it going 27.8 before messing with it more than I did I hope I get it faster because it's fun comfortable but not for long it made for 16 year Olds and up.
What size clutch goes on the the engine
@@briankahny11 it’s a 5/8” bore #35 chain 11 tooth - amzn.to/3Xj7AII
How many tooth is the rear sprocket? Mine will not pull me. And engine is new. Or did you have some modification done to yours?
It’s the stock rear sprocket with 75 teeth with an 11 tooth clutch
T speed?
Around the property it’s about 20-22mph. I might just have to take her to the main road and see! I’ll let ya know!
Update: I was way off!! 33mph on the open roads. Held 30ish most of the time. Very impressed!
@@RuckusGarage what gears are you running?
I want to replace my engine 80cc but don't know how it doesn't start
Where did you drill the holes??! I can't figure out the placement for this
Get the clutch and chain installed, align the chain and then mark where the mounting holes are on the engine plate with a marker. Making sure the chain is straight is the most important part.
Hi sorry I don’t know much about bikes but could u tell me the size of the chain for the mega moto for the 79 I’m building a bike for a parade
Should be a #35 chain. Good luck with the build!
@@RuckusGarage thanks
Does it go up hills?
Not with an adult on it no, a torque converter would fix that.
can anyone tell me the measurements on where to put the holes for that engine
You'll want to start with the existing front two holes that line up and then you can mark the rear holes for the engine and slot them if you need more adjustment.
@@RuckusGarage thankyou for your help
@@jamesmay4291 anytime. HMU if you run into issues. Make sure your chain is installed and aligned before you commit to any holes
@@RuckusGarage I need to know to
How big are you?
Right in line with American averages, 5’9”ish 200lbs’ish
Every time the music came on, it blew out me eardrums with the earbuds! Please learn how to adjust the volume, thanks. Otherwise, great video.
Sorry about that. Levels were all set on my end so I’m not sure why you had that happen. I’ll double my efforts, thanks for watching!
i put a 212cc on mine😈
I bet that’s a rocket!