This programmer tool is demonstrated in many repair videos, please check. ua-cam.com/video/HTKgy7ZFiTA/v-deo.html ua-cam.com/video/3d8xm6oxkbo/v-deo.html&index=13 Also, we have detailed tutorial video for our customers who have purchased the tool.
JAGMEET SINGH Hey Bro How Are You I Have ZXW Tool But In This Video That Software Are Difrent If You Know Some Software Like ZXWTOOL Please Tell Me Brother Thanks
Good job! I did an iphone 7 swapboard, everything went fine, the device turns on but freezes after entering the lock code. So I moved the nfc from the original motherboard and it is still the same then I measured the pads under nfc and also everything ok .. what could be the reason for this behavior?
I got the fully broken i phone 7 on the ground. Moder board is broken . But i guess chips are alive now. Can i put it into i cloud locked i phone 7. If it is possible i want to buy i cloud locked i phone 7 on a second used market.
Hi REWA great video like always but i dont understand one thing.. u just jump the AUDIO IC pad to the c12? its the continuity problem? and i dont see any jumper made trough the line just tinning the trace with solder.. please advice thank you
I have the exact same issue but no "Swinging" resistance. (Is steady .482). I ran jumper anyway, all other pads ok with continuity and no fluxuations. I reballed and no change. Still same symptoms. Any other ideas? Thank you
AMA looks like recent iPhone has replaced the solid shield with that sticker which increase the chance of PCB get bend when it's dropped, caused broken solder/trace. With the solid shield then the shield will help with the structure stability of the PCB and BGA chips inside it
hello Rewa, i have one iphone 7, every time i open the sound and make calls reboot, i already build the pads and reball the chip, but the problem remain, thanks.
For the method of jumping wire, you can check other videos of our UA-cam channel by searching keywords. Or visit REWA Online Course Website ( academy.rewa.tech ) Thanks for watching :)
Great video like always. But how did you diagnose that this trace is a problem? Do you every time check all traces in diode mode? And why of the all phones that kind of shi.t is happening only on iPhone. iPhone hardware is total garbage.
i am a technician in Dubai , i have a iphone 7 stuck on apple logo i restore mobile with my pc but there is no change and i didnt get any error please help me
Wait for 6 minutes and check if it can enter into the operation interface. If it can enter to the system, you can view the following video for reference: ua-cam.com/video/5fbsh0sgPV4/v-deo.html
Dear R fans, what kind of contents do you want to see in our channel? Leave us a message about your ideas and thoughts.
REWA Technology some videos about system repair tool and how it works .
This programmer tool is demonstrated in many repair videos, please check.
ua-cam.com/video/HTKgy7ZFiTA/v-deo.html
ua-cam.com/video/3d8xm6oxkbo/v-deo.html&index=13
Also, we have detailed tutorial video for our customers who have purchased the tool.
An updated video for iPhone 7 icloud hardware unlock would be appreciate! (like the iPhone 6 and 6s)
a tutorial about the programme of schematics (wuxinji )that we see on your videos
Would love to see more videos on finding shorts with DC powersupply and multi meter, diode mode, resistance, etc..
That's amazing ！You just find the stuck screen problem initiated by the audio IC.
I love your videos. Very clear and to the point; but I'd love it if y'all added detailed & vocal instructions.
But awesome over all.
Thanks for the suggestion. We will keep improving.
Rewa Technology you are actually perfect company
How did you pinpoint to c12 line? Did you resistance check all pads?
mrsemifixit c12 is on the edge of ic .
thanks rewa you the great , i solved frozen 7 by change audio ic
awesome job!
Hello sir Wich Software Are Using For Digram Schematic Check For Iphone 7 on This Video
sahil husain Bro use zxwtool or pads
JAGMEET SINGH Hey Bro How Are You I Have ZXW Tool But In This Video That Software Are Difrent If You Know Some Software Like ZXWTOOL Please Tell Me Brother Thanks
Good Day Rewa Technology can i ask what do you use setting for the air flow and heat? Thanks and God Bless...
Can you do an unlocking video for iCloud on the iPhone 7 please ?
Galaxy s8/s8 plus glass only replacement? I want to see a video like this😃😃
Good job!
I did an iphone 7 swapboard, everything went fine, the device turns on but freezes after entering the lock code. So I moved the nfc from the original motherboard and it is still the same then I measured the pads under nfc and also everything ok .. what could be the reason for this behavior?
You people are amazing, I wish I could work for you someday
I got the fully broken i phone 7 on the ground. Moder board is broken . But i guess chips are alive now. Can i put it into i cloud locked i phone 7. If it is possible i want to buy i cloud locked i phone 7 on a second used market.
무한이기 It will be VERY difficult to do it
are you able to do this procedure onto my iphone 7plus?
We are so sorry that we do not offer indivdiual service at present.
same issue above, microphone won’t work, voice memos button shades out, etc. and if so can you do it for 100$?
Hi REWA great video like always but i dont understand one thing.. u just jump the AUDIO IC pad to the c12? its the continuity problem? and i dont see any jumper made trough the line just tinning the trace with solder.. please advice thank you
Kira Yamato he only put the wire from the pad to the trace because the trace is interrupted
I have the same symptoms on the iPhone 7 plus.
It is not solved by the above solution.
Is there a solution?
maaan that a high quality work
Thanks.
Hi, what's the name of the software You use in the video?
Big Big thanks REWA😮👍👍👍👍👍
nop its still black..not rebooting and its getting very hot....what is wrong?
I have the exact same issue but no "Swinging" resistance. (Is steady .482). I ran jumper anyway, all other pads ok with continuity and no fluxuations. I reballed and no change. Still same symptoms. Any other ideas? Thank you
Please try to check the other pins of the audio IC.
thanks ALoot.....Your ARe THE BEST
Nice job. Congratulations.
Thanks.
they remove the headphone jack and still have audio chip problems lol
ben ben next plan = totally remove the audio function
I have redmi 4a and problem is the phone is showing charging but not charging at all. Please suggest me what should I do
Why is it that only iPhones have chip reballing problems? Every single iPhone has had issues with similar fixes.
AMA looks like recent iPhone has replaced the solid shield with that sticker which increase the chance of PCB get bend when it's dropped, caused broken solder/trace. With the solid shield then the shield will help with the structure stability of the PCB and BGA chips inside it
3:43 Software??
hello Rewa, i have one iphone 7, every time i open the sound and make calls reboot, i already build the pads and reball the chip, but the problem remain, thanks.
already found the problem, U3301 broken... thanks
why dont jumper method is shown in video .?
For the method of jumping wire, you can check other videos of our UA-cam channel by searching keywords.
Or visit REWA Online Course Website ( academy.rewa.tech )
Thanks for watching :)
Thanks for the video bor
where can i buy the tweezers you are using?
Hi Luke,the tweezers used are here www.rewatechnology.com/e-catalog/search/Tweezer
REWA Technology thanks, but can I get a link to those in video? There's 10 pages of tweezers.
AKA. Loop desiase
Great video like always. But how did you diagnose that this trace is a problem? Do you every time check all traces in diode mode? And why of the all phones that kind of shi.t is happening only on iPhone. iPhone hardware is total garbage.
Better than a bomb phone....called Samshit.
Usually we diagnose by checking the signal traces with Multimeter in diode mode.
我在6 plus上遇到过这个问题
U r genious .mastermind
Super
i am a technician in Dubai , i have a iphone 7 stuck on apple logo i restore mobile with my pc but there is no change and i didnt get any error please help me
Zaeem Zahid they have a video on iphone stuck in boot screen, look for it
Wait for 6 minutes and check if it can enter into the operation interface. If it can enter to the system, you can view the following video for reference: ua-cam.com/video/5fbsh0sgPV4/v-deo.html
Ya that help me
Not
Iphone 7 error 14 solution ???
Most likely the problem is related to NAND Flash.
I think this is loop disease.
感谢您的影片
谢谢您的观看。
Is this the iPhone 7 version of 'touch disease' ha ha, just caused by a different ic not related to touch.
Iain Simpson I’ve thought the same thing
Like a surgery amazing !!!!
Genius Bar can't do this stuff
thanks A-loot........
Show! Muito bom!
hh
I can do
nice ooooooooooooooo some 👍👍👍
Suparrrrrr so nice
super :)
hey guyz no need this complications. just DOWNGRADE TO IOS 10.3.3 your problem will be solved
THANKS MAN IT WORKS :d
Just a question .But do u seriously think we have all those tools at home 😂😂😂 guys stop waisting your time and bring your iPhone to a repair shop
YES I HAVE ALL OF THESE THINGS!!! not wtf is this shit!
wao