Seriously, though...you guys do amazing work and probably are responsible for thousands of pounds of e-waste staying out of landfills...keep up the good work & keep being green!
colaigor it's not that which is hard, it's getting the glass off, you smash it up and you just end up with smashed glass stuck to the phone instead. The glue is THAT bad even when smashed it still holds the glass on. So you end up with the back of the phone like a sheet of glass paper and you have to cut it off with razor blades, but end up getting new blades every 5 mins as they constantly blunt or snap. Is some nasty glue big time holding it on, like no other iPhone.
Motherf....iPhone X is a nightmare to repair. I work as a part-time mobile repair guy and have had bad repair experience with HTC and Apple. But this one takes it to whole another level
Justin Case never repairing an iphone X... Recommendation, just take it to apple.... Screen replacements are expensive when oled... Now they're for iphones... Yikes
Oh and another interesting thing to come up with would be an alternative to the "Horizon machine" - the machine that pairs the new Touch ID home button in a screen replacement to the phone (among other things).
Amazing video, REWA! I have an idea - you should try to come up with a way to cheaply and accurately manufacture iPhone housings. Also you should come up with a way to print imei, serial, etc. numbers on those housings. Oh, and another great thing to try to come up with is a method to replacing just the back glass on iPhone 8/8+ and iPhone x. That would be great!
Such a dismantling method may lead to a problem with the screen and camera loop. there is another method, in my video there is an example iphone x and iphone xs
Hello, I took the glass off and everything, i get no image after it. The touch works because i can hear the phone unlock once I swipe up but I get no image. You think the OLED is done for?
Wouldn't it be easier to remove the glass with a freeze machine and leave the amoled in the frame , and then re laminate the new glass to the amoled / frame assembly ?. Iv seen this done before with the Samsung edge screens and seems to work ok.
I failed at 12:38 , It needs to be placed firstly the down side where the flex cable it is, after I notice that I immediatelly pushed the OLED to remove from the frame to attach down side firstly, but after I pushed I hear somecracking sound and after I test the screen to see it appeared several lines on the left sides, almost done, now I know for next time.
Casi el mismo proceso. Pero más difícil para la operación. También hemos hecho un video del iPhone XS Max Glass, reparación en nuestro canal. Puede consultar este enlace: https: //www.youtube.com/watch? V = ynyaseuL3RE & t
REWA can you put a camero into the pressure chamber and film the bubble removing process? I am curious to see the bubbles go away in low pressure. Probably from the sides
Thanks for the question. Our repair engineers usually have function tests on the screen after every refurbishing step to make sure everything is alright in this section,but in consideration of the video duration, the relatively unnecessary parts were edited out.
The temperature we applied in the video is listed below in celsius for reference only. Frame Separating: 110℃ LCD Separating: 90℃ OCA Laminating: 55℃ Glass Laminating: 45℃
I buy lots of screen. AAA+ top tier iphone 7 plus screens ive had good 3d touch on. But youre right, nothing compares with OEM. 3d touch will have functionality but wont be anywhere near as sensitive as OEM
You are right that OEM screen is better than the aftermarket one, but the prices also differs a lot. For now, aftermarket screen has become more and more mature and stable. People use aftermarket screen for it is more cost-effective. Actually, customers are free to choose.
I’m assuming this repair ruins its water rating? Apple re-apply a new rubber lining, replace the entire panel and smack on a repair warranty. These guys effectively just glue another bit of glass on the panel... and it eventually starts to peel off again.
any solution to repair iPhone X that shuts off randomly? I cannot find schematics anywhere to try and troubleshoot the phone. There is no warranty on this device . I tried a new charge port from a donor phone, didn't fix it. I haven't tried a battery replacement yet because the donor phones battery is no good. Ive tried resetting the time to 12/1/17 and also tried turning off notifications but none helped. it is also on the latest OS 11.2.6. @rewatechnology if you find a solution please post a video. There are so many iPhone X having this problem, apple swaps the phones out but in my case warranty is void because there is a tiny chip on the screen. Ive already talked to an apple tech about it and was denied a replacement. thanks
REWA Technology yes, but not all the time. Sometimes when plugged in after shut down the screen stays black. When I unplug the power supply, unplug battery then reconnect it’ll boot up normally but still randomly shut down.
Enhance iPhone logic board repair skills with REWA Academy Online Courses ( Foundation, Handwork, Work Flow&Troubleshooting, etc.)
Check it now! > academy.rewa.tech
what temperature do you use?
REWA Technology how i can do?
I'm interesting
REWA Technology 国内怎么搜索，关注，有微信公众号么。
I am intersted i am training with us
You are teach me
Seriously, though...you guys do amazing work and probably are responsible for thousands of pounds of e-waste staying out of landfills...keep up the good work & keep being green!
You Are The Best Repair And Tech Service in The World !!! You Must Open A Service Center in All Countries.. Good Luck
the removing process looks like a nightmare! great job done
Hi actually I am also mobile repairing but when I see your technology I am really so satisfied for this video thanks guys
Taking repair to whole next level...
Would love to see a successful only back glass repair
I also did one too, 7 hours total, complete nightmare, the only way is with a freeze machine. Any other way is not cost effective .
colaigor it's not that which is hard, it's getting the glass off, you smash it up and you just end up with smashed glass stuck to the phone instead. The glue is THAT bad even when smashed it still holds the glass on. So you end up with the back of the phone like a sheet of glass paper and you have to cut it off with razor blades, but end up getting new blades every 5 mins as they constantly blunt or snap. Is some nasty glue big time holding it on, like no other iPhone.
Iain Simpson is 7 hours cost effective?
Takes my techs no more than a couple hours now to do the back glass. Repetition, it gets easier
Motherf....iPhone X is a nightmare to repair. I work as a part-time mobile repair guy and have had bad repair experience with HTC and Apple. But this one takes it to whole another level
Well, new solutions are always there.
Justin Case never repairing an iphone X... Recommendation, just take it to apple.... Screen replacements are expensive when oled... Now they're for iphones... Yikes
Also your English translations have improved significantly
Thanks. We will keep improving.
Que buen trabajo maestro es usted inpecable en su trabajo.
Mi oregunta es cuanto salen las dos maquinas que usted utiliza para cambiar glash
At REWA, everything is possible.
Please what settings do you use for lamination, vacuum and debubble? Thanks
Oh and another interesting thing to come up with would be an alternative to the "Horizon machine" - the machine that pairs the new Touch ID home button in a screen replacement to the phone (among other things).
Amazing video, REWA!
I have an idea - you should try to come up with a way to cheaply and accurately manufacture iPhone housings. Also you should come up with a way to print imei, serial, etc. numbers on those housings.
Oh, and another great thing to try to come up with is a method to replacing just the back glass on iPhone 8/8+ and iPhone x. That would be great!
Thanks for the suggestions. It's quite enlightening. We have passed these to our Technical Department.
can only be done if you have the machines then.. thanks guys
Good Job 🍷
Nice how much it will cost?
My screenglass is cracked in bottom right .Can you replace it for me also.
And how much does it cost including shipping ..
Such a dismantling method may lead to a problem with the screen and camera loop. there is another method, in my video there is an example iphone x and iphone xs
Hi. Is it better to use heat or a freezer to remove the glass?
using b 7000 to glue the frame will last? wouldnt the frame will start separate after using for long time
Hello, I took the glass off and everything, i get no image after it. The touch works because i can hear the phone unlock once I swipe up but I get no image. You think the OLED is done for?
Wouldn't it be easier to remove the glass with a freeze machine and leave the amoled in the frame , and then re laminate the new glass to the amoled / frame assembly ?. Iv seen this done before with the Samsung edge screens and seems to work ok.
I failed at 12:38 , It needs to be placed firstly the down side where the flex cable it is, after I notice that I immediatelly pushed the OLED to remove from the frame to attach down side firstly, but after I pushed I hear somecracking sound and after I test the screen to see it appeared several lines on the left sides, almost done, now I know for next time.
Sir i am very interseted your work for all models you r best in the world my dream visted your rewa teams and tech propar teaning
hi Rewa Technology, can you change the any camera smartphone?
Where do you buy all those equipment? Wow, awesome though
Es el mismo sistema para extraer el glass del iphone xs max?
Casi el mismo proceso. Pero más difícil para la operación. También hemos hecho un video del iPhone XS Max Glass, reparación en nuestro canal. Puede consultar este enlace: https: //www.youtube.com/watch? V = ynyaseuL3RE & t
can you tell its been replaced and is the bezel fatter then the oem bezel
Hi, what is the glue cleaner? Isopropyl or something with acetone? Thank you
Do it become LCD display instead of OLED display after glass is replace and get repair??
@Mihirang umrigar It's still the OLED display.
Now i know what i want to be, I want to be a part of your team!
Theoretically you could remove the notch on the top of the display when using a slightly changed screen glas! :P
After i remove the frame middle of the touch not working. If i change the touch layer it will work or not?
what a surgeon 😀
REWA can you put a camero into the pressure chamber and film the bubble removing process? I am curious to see the bubbles go away in low pressure. Probably from the sides
The camera must be in suuuuuuuuuuuuuuuuuuuuper-high quality.😂
maybe try a fake gopro that costs 20$ or something? what can you lose :D low pressure shouldn't harm the electronics
A go pro in a waterproof housing may work as they can be used for diving, so can stand crazy pressure
can i use normal laminating machine like AK-pro? OLED must use LED laminating machine?
What temperature did you use to remove the glass
works that glass even if you do in the water?
holy shit you actually did it! well done
I wonder if you could use cutting wire to remove the bezel 🤔🤔
Not without damaging the flex cable. Too many obstructions in the way, as opposed to the glass side which has none.
How to convince parents to buy LCD refurbishment tools?
True Masters!
When separating the glass lens, how do you know the wire is going between the correct layers?
You can feel it
It is necessary to use very thin LCD cutting wire, and try to get close to the glass lens.
The feeling is important. XD
Hey REWA, did you ever try to separate the glass with a freezer? Like those OLEDs of Samsung.
By the way - great job!
We haven't tried with freezer yet, but this message has been passed to our Technical Dept. We will keep try trying and improving.
Okay, how much does this procedure cost?
Felicidades y gracias por compartir sus trabajos.
what is the liquid to remove the bezel?
u can use lighter fluid
how many degree you remove bezel
where can i get this done because apples tripping talking about they cant just replace the glass 😒
Love you guys your video is awesome so satisfied it's really amazing thanks for your lovely videos
Thanks for the comments. We will keep on going.
REWA Technology you always welcome
Как правильно отполировать iPhone и удалить мелкие царапины?
I want to change my glass for iphone x please help to change ...
Why on the result phoneapp is on the left but on the last test before laminate, this one was moved on the right..?
Thanks for the question. Our repair engineers usually have function tests on the screen after every refurbishing step to make sure everything is alright in this section,but in consideration of the video duration, the relatively unnecessary parts were edited out.
:) ok
Can I send you one iPhone X screen to refurbish? If so how much would it cost?
We are so sorry that we do not offer individual service at present.
What’s that blue belt/wire on your hand ?
It's anti-static wrist strap.
Which temperature did you use?
The temperature we applied in the video is listed below in celsius for reference only. Frame Separating: 110℃
LCD Separating: 90℃
OCA Laminating: 55℃
Glass Laminating: 45℃
REWA Technology thank you
Is Face ID work after glass change
Great job
Does face jd still work?
you will need 360 degree roratring lcd separate hot plate machine
It’s still against waterproof this iPhone??
It will lose the waterproof function after disassembled, but this function can be partially recovered by applying a layer of water resistant adhesive.
شكرا جزيلا لك حقيقة انت لطيفة جدا وعملك متقن
ممكن كيف اشتري عندكم
I believe you have replaced this phone glass before right???am I right???
The glass have not been replaced before.
very professional
Well done
So just get a new screen instead of replacing glass? This looks difficult
Verry nice
Increíble trabajo
Thanks for the vid
Sir small help ??
Gracias
I need sent for repair how
Would like to know the bgm.
I would never use an aftermarket screen on an iPhone with 3D Touch.. Too much tech in the screen.. 3rd party companies can’t replicate it 100%
I buy lots of screen. AAA+ top tier iphone 7 plus screens ive had good 3d touch on. But youre right, nothing compares with OEM. 3d touch will have functionality but wont be anywhere near as sensitive as OEM
You are right that OEM screen is better than the aftermarket one, but the prices also differs a lot. For now, aftermarket screen has become more and more mature and stable. People use aftermarket screen for it is more cost-effective. Actually, customers are free to choose.
I phone x display glass successfully sir
Why you using 2 machine. There are Automatic laminating and bubble removing machines. Why you use old method to do this.
anyone got spare laminating machine?
Просто нет слов.... Супер
diz skillz!
Apple 4s new board how to price
iPhone 4S motherboard new press rupi
We are so sorry that we do not offer logic board at present.
Need a robot, i like to know the machinery process involved to build the screen on reverse.
Super amazing
Thanks.
Amazing 👍🏻👍🏻👍🏻📲📲📲
I’m assuming this repair ruins its water rating? Apple re-apply a new rubber lining, replace the entire panel and smack on a repair warranty. These guys effectively just glue another bit of glass on the panel... and it eventually starts to peel off again.
nice
the no talk channel !
thats how china looks like.
Are bhai meri to 3 display tut gay i
number one
Thanks.
Can you repair my phone please sir it’s to much cost in india
best!
I like this music
Suparrrrrrr
Very nice 👌🏻👌🏻👌🏻👌🏻👍🏻
any solution to repair iPhone X that shuts off randomly? I cannot find schematics anywhere to try and troubleshoot the phone. There is no warranty on this device .
I tried a new charge port from a donor phone, didn't fix it. I haven't tried a battery replacement yet because the donor phones battery is no good.
Ive tried resetting the time to 12/1/17 and also tried turning off notifications but none helped. it is also on the latest OS 11.2.6.
@rewatechnology if you find a solution please post a video. There are so many iPhone X having this problem, apple swaps the phones out but in my case warranty is void because there is a tiny chip on the screen. Ive already talked to an apple tech about it and was denied a replacement.
thanks
Can it be powered on by a DC Power Supply?
REWA Technology yes, but not all the time. Sometimes when plugged in after shut down the screen stays black. When I unplug the power supply, unplug battery then reconnect it’ll boot up normally but still randomly shut down.
muito bom!!1
My iPhone 4s is not working
shantanu joshi Drop it 😂😂
Cool video😎😎😎😎😎😎😎😎😎
Thanks.
Very good
What’s that in your wrist?
to prevent static shock
What's with the coke nail