Bass in a small space? Sealed subwoofer enclosure design.
Вставка
- Опубліковано 10 чер 2024
- Learn more about getting bass in a small enclosure here: • Bass in A Small Space:...
For this video I designed three sealed enclosures to show what happens when you try to get bass in a small space. We then took measurements with a DATS and Room Equalization Wizard to show you that a small sealed enclosure does not work.
Use the code DIY5 for a discount:
Ultimax Subwoofer: parts-express.sjv.io/e406RX
DATS: parts-express.sjv.io/b3BEDP
Calibrated Mic: parts-express.sjv.io/ORDj9z
Links to other items used in the video:
Center Punch Set: amzn.to/3z1Objw
Threaded Inserts: amzn.to/3PLMRYL
Machine Screws: amzn.to/3IY5eaK
Drill Guide: amzn.to/3cCM7qG
Corner Clamp: amzn.to/3oIzjlb
Exclusive Discount Codes for DIY Audio Guy fans:
7% off of Savard (www.savardspeakersystems.com/...) with the code DIYAUDIO
10% off of Custom Speaker Pods (customspeakerpods.com/) with the code DIYAG
5% off from Battery Hookup (batteryhookup.com) with the code DIYAudio
5% off at Parts Express (parts-express.sjv.io/3PGnNr) with the Code DIY5
10% off at Jag35 (jag35.com/DIYaudio) with the code DIYAUDIO
Check out the DIY Auido Guy Amazon Store:
Amazon: www.amazon.com/shop/diyaudioguy
If you found this video helpful then you can support the channel on Patreon for as little as $3 a month: / diyaudioguy
Shop for Basshead Gear at Down4Sound: lddy.no/1065t
Shop for Car Audio Crutchfield: howl.me/cg9bCOKLoK7
Shop for Car Audio at Sonic Electronix: bit.ly/3bazPBs
Shop for speakers at Parts Express: parts-express.sjv.io/0J6eYE
Shop for whole-house auido at Arylic: www.arylic.com?aff=79
DIY Audio Merch: my-store-b3f136.creator-sprin...
Connect with me on social media:
Facebook: / diy-audio-guy-11142806...
Instagram: / diyaudioguy
Twitter: / diyaudioguy1
Podcast: www.soundadviceshow.com
Chapters:
0:00 Introduction
0:11 Three Sealed Enclosures
4:32 How to use threaded inserts
6:34 DATS data collection and results
7:42 Room Equalization Wizzard data collection and results.
11:38 Comparison to a ported enclosure
*As an associate/affiliate marketer I may earn a small commission on qualified purchases on Amazon, Crutchfield, Parts Express, Sonic Electronix, Arylic or Down4Sound. - Авто та транспорт
Learn more about getting bass in a small enclosure here: ua-cam.com/video/v4rAkxck2_Q/v-deo.html
a calculator exist to build folded horn box?
@@Durolith what you want to do is download some free software called Hornresp.
What about the distance between the sub vent and the back wall? Is there some "standard" that cam be followed or can you basically be 1/8" clear (or 1/4", or 1/2", etc.) from it?
@@REG3305 I could probably do an entire video about that. Far too much to answer in the comment section.
@@DIYAudioGuy I'll keep a look out for 1 then.
All I learned from this video is you like numbers, and don't put sub in small cabinet.
I listen to a wide spectrum of music genres and while I notice my preffered sealed enclosures aren’t as strong with the deep bass of rap, I can’t sacrifice their accuracy with percussion in rock and other genres. Investing in better subs with appropiate amplification can compensate for the lower efficiency. Thanks for another great video.
Right!
I listen to EVERYTHING music wise, from hardcore rap to Bob Marley then Megadeth and other metal stuff, acoustic and much more.. I have been satisfied with crisp, slamming bass no matter what music I was listening to with the sub's ported very low.
I would think sealed would sound a little better, but I think the low port tuning gives a little flatter curve so it sounds good and hits hard, least it sure seems to.. I am hoping to install my 7 band rear and 5 band front EQ which should really get it sounding clean as well.
Agreed 100%. The types of music I listen to don't require that big low blast. Nor do I really want that much output. The sealed box works well for me and thay is what I have in my car 90% of the time. I'm kind of an audio nut so I have tons of different amps and subs and I'm constantly buying stuff to add to the collection. From time to time I will throw a different box in the car and set it up for that enclosure and play with that for a couple weeks. I've noticed huge differences not only between Woofer sizes, but between enclosure sizes too, even though they're getting similar power. You should put whatever box you have space for, possibly choosing a Woofer that will work keat with your available space and also the type of music you listen to predominantly.
@@derekgardin1512 absolutely, although I am definitely an audiophile, almost snob at times, I also love the slamming, hard Hitting, low bass from some rap and some bass tunes etc .. but it has to sound good, and switch to Megadeth or whatever and sound just as it should too!!
@@derekgardin1512
Then I suggest you ditch a car audio subwoofer and get a dedicated woofer like the Peavey Black Widow or PRV MB series or Electro Voice woofers or any PA type woofer designed for concerts. They are ear splitting loud but not intended to be so loud under 35hz but for everything above that up to 5khz.
This is a nice video to show how a acoustic suspension box can deliver different results depending on box volume. Also a great woofer to use. This is one of your best DIY!
It was a fun project and I thought it would pair nicely with my Iron law video. Hopefully people will find it helpful.
I am a sound quality guy but love the deep bass also. I have a 2012 GMC Sierra and made a sealed enclosure for my Skar EVL-10 to fit under the front arm rest between my front seats. I am powering it with my Rockford Fosgate 1200-1D. I listen to literally everything music and this performs VERY VERY well!
Cool!
I'm 52 and from 1993 until 2015 I ran sealed. In 2015 I bought my first ported enclosure for two alpine type S. Man what a difference. Ported is the way to go IMO
I would agree.
Depends on what type of vehicle you're putting them in!
Correctly ported gives stepped up decibel output in the lower frequency ranges but at the compromise of distortion & power handling.
I've tried Alpine S-Series in a Chrysler minivan- Ported enclosures versus sealed enclosures and No if and buts about it a sealed enclosure clearly outperforms ported.
larger Vehicles open up lower frequencies such as vans. And also the S-Series Alpine Subs just don't work as good in a ported box.. .
@@bobadingoYour opinion of sealed boxes outperforming ported boxes is funny lol. A sealed box will never ever in my eyes and alot of bass heads eyes beat a ported box. A properly tuned ported box will be way more efficient than any sealed box. Less power to make more boom.
@@thelegendarywasdgamer9724 the last word in your comment is exactly the results of a ported enclosure!
we no longer worry about efficiency as amplifiers have plenty of power nowadays any audio file will clearly tell you what system sounds best but also tuning ported closure is next to an impossibility in an automobile, you don't just tune it to the driver! you tune it to vehicle cab volume and a lot of people don't know that, just the placement of a subwoofer makes a massive difference.
the type of vehicle, it's ambient noise footprint, & various other parameters all go into tuning an enclosure for a particular vehicle remember We reproduce music in its original form and not to add Distortion and falsified frequency ranges.. .
For car bass, ported is always the way to go. Very few sealed applications will sound better or louder for bass reproduction in a car. I have one 10 ported right now that is just as loud as two 12s sealed so imagine the usable car area being saved. Sealed just doesn't make much sense anymore.
The diminishing output of a sealed box can be offset by "room gain" (or cabin gain), for virtually flat extended deep output. The 450w 10" Ultimax performs "better" in a 1.5ft^3 ported box than in a 0.75ft^3 sealed box, but then a 600w 12" Ultimax could fit a 1.5ft^3 sealed box. A 4ft^3 ported box fits a 600w 12" Ultimax, but then a 4ft^3 sealed box could fit a 1kw 18" Ultimax.
No question you're right that the properly designed ported enclosure is going to outperform the sealed at low frequency. However, the extreme difference shown on the graph looks more like the result of testing a driver that prefers a ported enclosure. I suspect it's a bit less dramatic when testing speakers that are specifically built for sealed applications. Also, you can EQ boost a sealed sub (within reason) all the way down to the lowest frequencies. You can't boost a ported sub below it's port tuning because it lacks the air suspension to dampen it's movement and it will likely be destroyed.
👍
Im digging the woodworking content. Its great when hobbies overlap
It is something that I had to learn in order to build speakers, that is what I find so fascinating about the hobby. It overlaps with so many other hobbies.
Yes, absolutely. I have learned a lot. Installing alone you get to play with electrical wires and connectors, solder, dismantling car interiors. If youre fabricating boxes; woodworking or fiberglass, possibly upholstery/paint or other finishing. All of these skills are valuable in so many other aspects of life.
Props to you for diving into woodworking instead of buying prefab or having someone else do it.
This was an extremely interesting and well thought out video. Alot of great information for box builders learning the craft. Cant wait for the next one
👍
A friend of mine back in the 90’s had a new Chevy standard cab. He had two 10’s in a box that took up the space behind the seat. Even moved the seat forward but was still small for two 10’s. He went to a stereo shop to see about adding two more 10’s I kept telling him it’s to small for the two he had now. He had to put a big amp just to make it sound decent
Great video!!! This makes so much sense. I have a ported box for my subwoofers and I would never use a sealed box for them because the difference in output is huge. However, for the midbasses in my doors, sealed would be perfect. It won't take a lot of space and since they are running from 80 hz to 800 hz, I don't need to worry about it getting low. But for subwoofers, I would 100% use ported enclosures.
Glad it was helpful!
@@DIYAudioGuy It was, that is why I subscribed to your channel. There is a tremendous amount of things I can learn from you so that I can keep improving my car audio system. Cheers!!!!!
What a lovely channel with so much knowledge to share !!!
❤
Buddy, you are amazing! Thank you for this video, yes, I'm subscribed and I like your videos. You are saying and showing so many important specifications and tricks, that opens my mind towards all questions I have ever had. Excellent channel! Thank you!.
Thanks!
Great video explaining how the basics work.
Please can you do this test again with all 3 boxes but now put in the fabric that fools the subwoofer into thinking it is in a bigger box. I see other comments about doing a ported one, which would be fun, but just adding some speaker fabric (don't know technical name) into it, how much does it increase the perceived volume. Since the boxes are already made, not much has to be changed.
Stay tuned!
Awesome video. It's rare to see a sub that performs so we'll sealed and ported, but I'm even more surprised by how much better the ported enclosure performs here.
I really enjoyed this subwoofer.
@@DIYAudioGuy What are the fs and Qts?
I kerf and port every enclosure including the port. Haven’t met a sub that sounds cleaner in a sealed enclosure! I also am a fan of fit the sub to the vehicle because they don’t fit the car around the subs! Awesome video! Excellent job explaining the difference in enclosure size and why experienced builders don’t just guess!
👍
Extremely enlightening! Thank you!
Glad it was helpful!
An observation: when you stacked the three builds at the end, the added depth was representative of the gain in low frequency on the graph.
Nice video showing frequency comparisons. One thing to consider is that sealed enclosures generally produce less distortion below the box's resonant frequency than ported enclosures. Ported boxes don't provide driver damping below the enclosure's resonant frequency, allowing the driver to vibrate unhindered.
I've got 2 jbl 15inch subs... Ported box...bass works box ... It's ran at 1800 watts. I definitely love em. They are like a free massage ❤❤❤
Thank you for such an informative experiment. Being a bass lover and had built numerous speakers and subs for past 20 yrs here in Singapore, I would like to share these observations:
- MDF wood made enclosures needs much lesser bracing than plywood enclosures to sound equally good.
- MDF Wood doesn't do well in wet, rain or outdoor conditions.
- Sealed subs produced the least spectrum decay bass, typically less than 10ms aka 'tight' or 'defined' bass. Comparing to ported subs designs, bass seems much lesser.
- Most ported subs are capable of producing more bass than enclosed subs. However, the bass has longer decay around 10-20ms. Which most folks deem bass as 'fuller' sounding. Seems like a little bass decay may not be such a bad thing .
- passive radiator subs produced the most bass among the 3 types of enclosure but has the longest bass decay, usually 20ms & above. Some may find this type of bass undefined or 'boomy'. Still this type of subs are great for outdoor. Bass can be felt further than the other 2 types of subs.
- Lastly, if space is limited, I like to used sealed subs with Apex Aural Exciter+Big Bottom. This is often used in P.A to extend the bass decay to sound fuller without increasing volume.
Fav subs: Cerwin Vega 15" drivers, Das Audio PA 18" drivers and Magnum extra long throw 12" drivers, Eminence 15" drivers & Audax 8".
Software used: Winspeakerz.
Bro u rule
Excellent video, clear ! thumbs up!
Idea for a video! I'd love to see what the actual measured differences are between a ported enclosure and a sealed enclosure besides the benefit of extension and/or output from the vented. I guess my question is how much do things like group delay change the response inside a vehicle...
I have a 12" Dayton Ultimax in an Goldwood box of ~1.25ft^3 (2ft^3 is recommended). Performance is quite satisfactory with some EQ correction. The wedge-shaped box barely fits on the passenger floorboard of my truck. With the sub up front, I can low pass the sub @160hz without upsetting the stereo imaging.
I also use Dayton indoor/outdoor speaker pods ON MY DASH. I modified the pods with 2" mids, and mounted Dayton 1"x4" ribbon tweeters on the pods with zip ties. I just run the wires up my dash - it looks totally red neck, but sounds glorious with 4 x 75w stereo amp & 700w sub amp. Dayton (& Part Sex Press) has some great DIY gear. I've pounded these speakers daily in my car parked outdoors for 6 years and they still shine, even the delicate little ribbon tweeters.
Great video!! I would love to see you run the same test with the subwoofers inverted And see what kind of different this would make.
Good idea.
Love your videos man
Justin is always a wealth of information.
That is the goal.
Thank You
Wow, that router table is worth its weight in hold.! 😊 Great Video!!
It has been handy.
What you don't mention is that every car/truck will have what they call "cabin gain" which boosts the low frequencies so that in fact a very small box can sound very good in a specific vehicle. The best non boomy bass I ever had was an 8 inch woofer in a sealed box with a QTC of 1 and a FC of 60 Hz. It could easily play to 20 Hz and below in my Honda CRX. Using Mike Oldfield's The Songs of Distant Earth CD, the bass on the track Ascension sounded excellent and extended below even what my house subwoofer could play.
Just imagine would it would have been like with a bigger sub in a bigger box.
@@DIYAudioGuy Quite bloated probably. Civic is a pretty small cabin.
U-line has a double sided tape dispenser I’ve had one for about 12 years now they work awesome
I like this channel, a lot of tips regarding electronic hobbies.👍
Should have been tried the sound. Great information video..
Love the Dayton woofers , great sub 👌
IMO sealed, OB, or IB are the clear winners for sound quality _IF_ you use an appropriate driver. The trick is that the market is so heavily skewed toward tuned cabinets that the selection of such drivers is limited. For deep bass in a sealed enclosure you need both low fs and rather high Qts. That is to say the huge magnets that sell so well are contraindicated.
The other thing that is often not considered is room or cabin gain. If f3 is significantly below the frequency where room gain starts you get a nasty bloom or bloat in bass output and then when the 4th order roll-off kicks in the bottom falls out. For some applications this is no big deal but for serious music listening it can be a problem.
In a sealed enclosure the 2nd order roll-off is closer to the room gain boost curve so the final result is often more natural.
I also think that in general (up to a point) you are better off getting your displacement from larger cone area than from excursion.
Congratulations! You've just demonstrated the law of diminishing returns.
When the marginal product is zero the airspace is maximized.
Such a great intro. You cover what you need to know. The rest is just trial and error.
👍
just subscribed, thanks for the videos, I have learned a lot today, I am going to get a subwoofer for my Fiat 500, tiny little car with a tiny little trunk with a tiny little space, so I need a tiny little sub to make a huge sound. thanks again for sharing.
Thanks for the video! It's like you knew exactly what I wanted to see. I've always thought it would be fun to build a few boxes and compare them.
**(Sorry for the wall of text lol, it makes sense in my head but as I type it, it might get a bit disorganized and lose a bit of my intended meanings)**
One thing to touch on is the sealed box for the UM10 (and just about any sub) is when comparing these sealed enclosures, it's good to keep an eye on cone excursion. I bought the sealed kit for my UM10 so the box was 1.5 cubic feet. Technically 1.5 cubic feet and a 1 cubic foot box would perform identically. Only difference is efficiency of the bigger box would add a dB or so to the sensitivity around 20Hz. Which personally to me is insignificant and almost pointless. If you look at cone excursion for them, I'll look at 20Hz for this example, the cone excursion for the 1cuft box is touching xmax on 500w. While it takes 400w to reach xmax on the 1.5cuft box. So while you can get an extra 1dB on 100w less power, in reality that extra output you'll likely never hear. And you gain more the lower it plays, but this sub isn't going to do that well under 20Hz, and the cone excursion rises fast in the 1.5cuft box to the point it physically can't perform better than the 1cuft box under 20Hz.
I know you didn't go bigger than a 0.85cuft box in the video. But in the end the 0.85cuft box after looking at it in WinISD is probably the biggest box you need for the UM10 sealed. Because any bigger won't really give you any big additional improvements due to xmax limits on rated power. Which you basically already shown in the video with the small vs medium showing a much smaller difference.
Touching on the ported part. You've already seen my PR box for my UM10 but it basically acts like ported and going from sealed to that new (not new these days but you get what I mean) box it was like a whole new sub. Blew my mind with the low end I got out of it the first time I played it. Sound quality didn't get worse. IMO it sounds 10x better being able to cover a wider bandwidth.
Anyway, sorry for the rambling lol. Thanks again for the entertaining video!
If I were to do it again I would add an oversized box just to compare and contrast the tiny box.
This gentleman is a wizard!👏🏻🤘🏻👍🏻
Thanks!
Thank you for the great video. In winisd don't forget to encourage your viewers to look at group delay when comparing two models. The sealed enclosure will handly outperform most any ported design when judged on basis of a metric that quantifies transient response, but will need more drivers/excursion if it is to stack up to the ported design in steady state SPL. The casual listener is accustomed to late bass, but will prefer "tight" bass, all other things being equal, 100% of the time. Late bass isn't phase aligned well with the harmonics of the waveform being reproduced. Its the kid that always lags behind riding bikes around town. With complex numbers, like Winisd most certainly uses, there are at minimum two plots that define a response. Magnitude and phase. It is probably worth the small amount of time to play around with the parameters in the planning phase of a project, maybe sacrifice low end extension to give a better transient response, at a minimum know what the tradeoff is in simulation land.
that is pretty similar woofer to the 10" i bought: SB Acoustics SW26DBAC76-8 10’’ Aluminum Cone Shallow Subwoofer.
my box is 0.6Cubic Feet. i would consider that pretty tiny. did some WinISD and made the thing. not much air inside with all the bracing and 3 pounds of stuffing.
it did measure in my small room pretty flat to 20hz, but it did not sound that to me so i did a lot of dsp to it. now it sound like flat to 20hz and 15hz at reduced volume.
all with 100w amp mind you, that surprised me. and i matched the 8ohm driver with 8 ohm amp output.
Glad you are finally using REW! These different box comparisons are really valuable. (would like to see less smoothing.) REW is super powerful. I hope you experiment with all the other tools it has
That is the thing with REW, it has all of these powerful tools with no guidance on how to use them.
@@DIYAudioGuy If you are looking for something the average Joe can just turn on and know what to do, it's not super intuitive. That is true. As far as guidance, it does take some work to find the information.
I didn't want to assume you didn't know these things. Saying there is NO guidance is just not true. The REW help file is huge. It has many how tos. MiniDSP site has many articles. The REW site itself has videos and links posted. The forums have guides made by users. If you can find a pdf REW 101 HTS is great. I have Rev 6.2 I found somewhere. All of this stuff is right under your nose.
Audioholics has started making some videos on different features. You will find a lot of Home theater guys with videos. The problem I have with some video tutorials is it's hard to trust some of these guys when I see them not using simple buttons or options they would know about if they put in the time.
You gotta love that SAWSTOP fence!
It was a big upgrade from my old saw.
Thanks for this informative video!!
Glad it was helpful!
Sealed vs ported depends on the use, room setup etc. And sealed can definently go as deep and as loud as a bassreflex. But it requires more power and tuning. But if done right they do performe better for many uses. But it's cheaper and easier with bassreflex. That’s why really high-end subs more often are sealed while cheaper almost always are poeted. With exceptions both ways of course.
Not only you explained it well, but you took the time to get a loan and purchase the mdf. 🤪.
On a serious note, my single cab had the largest enclosure that would fit and it was still too small so I bought irrigation 3” pipe and cut it into several lengths ( tested all three to find the optimal one) to create a ported enclosure. I ran the pipe along the back wall of the cab and towards the passenger side. Ironically enough even though it sounded louder it still had the punchy tight bass of a sealed enclosure and I added another one. Tuning for a specific vehicle is monotonous and sometimes it sucks but it’s 💯 rewarding when you nail it!
Open the video will get some views, if not the loan sharks are going to come break my legs.
I have a 4 6.5 3-way coaxial speakers sealed and they sound great but not low. I dont use both at the same time to feel and compare sealed and ported and i cant decide which is better. Anyways thanks for another helpful content 😁
Most 6.5 coaxials struggle with anything below 100 hz.
Your video was very detailed and well done ! Congratulations !
I'm not savy at all on all this information given.
I have 6 1/2 inches in-ceiling two way speakers at home, and I'd like to make a box enclosure for each of them. Would you please give me the dimensions to make them ? I really appreciate it !
Luis
amigo,para um woffer de 4,5 polegadas de fs de 60 hetz e qts de 0,6 qual o volume em litros você me indica para uma caixa selada?
I have added ports to the tiny wedge flea market boxes. I fitted a piece of 2" pvc pipe in it about 10 or so inches long. The length of the port is all that mattered to getting the bass right. I was limited on space and the solution worked out nice.
If it works it works.
Would the pvc pipe work on a box for 6x9s
@@andregunther4200 Yes. Getting the length right is key. The larger the diameter the longer the pipe will have to be. Also there is a diameter that would simple be too small. I have used the pvc pipe for small boxes forever. There is a tool online to calculate port length to dial in a tuned frequency. It wont be 100% but it will be in the ball park.
I suggest an 1 1/4 for this speaker. Probably best to go in the side of the box to get the length you will need to get the desired frequency. Its gonna be close to the full length of the box. Do not start fully bottomed out. About an inch off is where I would start. That might be close to perfect. Find a bas test track with a note you like and tune to that. Pull out slow until the bass sound good. The cone will actually move less when you have the tune about where you want. Cut off excess and glue the pipe in place. Remove speaker and glue pipe in a few places inside so it dont rattle. I have been doing this since the 80's. I hope this helps you get your speaker sound better.
I completely agree. In 2012, I had a 12W7 I initially put it in a ported box made AV Priority specifically for the w7s tuned at 37hz and I was happy with it. But I was curious about how it would sound in a sealed box. So I ordered a sealed one from that same guy. Box delivered transfer the W7 and the first song I played was “I want to know what love is “ by foreigner and in 2 seconds I noticed the difference. They sound the same but the base of the sealed enclosure was shorter which means loss of lower frequencies. I removed it the next day. And never again. If I have a small space; I will use an 8” in a ported. By the way, the boomy and tight difference in my opinion is relative to the Subwoofer. I listen to varieties from Waka Flaka, Toto, Sade and Metallica and have good ears. If you have a good subwoofer and have sqf: go ported.
Thanks!
Great video, loaded with useful information.
Thank you! I appreciate the positive feedback.
Nice video! Just to add wjat I learned from a successful DIYer in a forum. Small enclosures can be beneficial for sealed enclosures if one has enough power and a DSP at hand. For given RMS power rating and linear excursion (xmax or Klippel tested) there is a volume such that the will reach it's x max at maximal power but never overshoot.
Using this volume you can get the most output of the woofer at "higher" frequencies, which are limited due to power handling and still get maximal output down low without overexcursion.
It requires a DSP and enough powet though. But I think it's what many commercial companies do (SVS etc) sinve their sealed subwoofer are usually quite small
Yep, the Linkwitz transform
@@DIYAudioGuy Yes, its usually Linkwitz transform. But it needa smaller enclosures to make sure the driver won't die.
On the other hand, you can get away with less power in a bigger enclosure. That's why my sealed boxes are not that small
Great videos! How good/bad are these under seat subwoofers and do you have recommendations for a custom built box for something better?
It takes space to make bass. So avoid the small ones and go with the biggest one you can fit in the space you have available.
Absolutely enjoyed this test, just subbed, no pun:)
Welcome aboard!
I’ve also noticed in winISD that as the sealed box gets larger, the subwoofer gets closer to its Xmax for a given power input
Yep.
Very nice video, big like ,you can put inserts on the back side!
Best system I ever had in a vehicle was an SQ box sealed for 4 12s on 4000 watts, could play everything extremely accurately with insane output and hit lower than a ported SQ box I also had that was tuned to 30hz
That is a lot of power.
What subwoofers did you have & what amplifier did you use
@@Luminous.Dynamics phoenix gold elite series subs with phoenix gold elite.1 amp wired to .5ohm with elite series door speakers and tweeters as well with 2 more amps.
Very educative
Thank you!
I put my threaded inserts in from the bottom of baffle and use longer screws to avoid the head of inserts not being flush. You can thread screws from either end of the inserts so it works great because if you need to take screws out when you turn screws counter clockwise since they are threaded through the non head end of insert it doesn't loosen insert but tries to tighten it
Clever!
I would like to see this done with poly fill vs eggcrate foam . Biggest thing is to see the gain or loss of output and quality .
Stay tuned!
I have primarily only ran sealed boxes in all my car audio systems since the 90s up until recently. ( except i did had a prefab 4th order with a Pair of low power Kenwood 10s back in the day once). Currently Running an NVX vcw12 in a skar ported box around 2 cubes net tuned to about 35hZ. Output is decent but doesn’t hit every note on different types of music. Mainly sound best with rap and rebass music and i realize its a prefab and a custom or built to spec box would prob perform better. Always liked the accurate sound of the sealed boxes so just ordered a 1 cube box to try sealed again before deciding which box type to go with when going custom built enclosure for a pair of these subs wired to 1 ohm on a soundqubed 3k amp.
If you are a fan of NVX you can use the code DIYAUDIO15 for a discount at nvx.com.
Great video, once again! 👍
I know this didn't apply to what you displayed but one thing I did notice when you were showing the specs of theb recommended enclosure, Parts-Express always gives the ported Fv and the F3 but they never show the Fb of the enclosure. 🤷 It bugs me. LoL. The F3 of 22Hz is phenomenal out of a box with an Fv of 1.55 cu/ft! 👍
I have noticed that as well. Makes it hard to back out the enclosure design without using WinISD.
What should be the dimentions for, Wedge, Sealed, Speaker Box for DB SA-302D2, 12" sub woofer woofer ?
Great video! Thank you
You bet!
Ok but if I put in a box a little to big and vent or port will that be ok? Also what do I gain by doing a downwards facing subwoofer? I’m doing a car audio in my garage and I have 3 10s and 2 6.5 inch subs I’m completely new and did all of my work so far watching videos!
That was fliping awesome and love you2 😂 ❤ bye bye
Hi, im currently building a mobile speaker with a small tpa3116d2 amp. I have a small and a large subwoofer chassis at hime which i dont need but i dont have their parameters to build exact enclosure for them... i want to use this box outdoor but i dont know if its better to go sealed or ported, small or large subwoofer because amp is under 100w rms on subwoofer channel. It should also not be to big to carry around. Maybe to got some help for me. Or should i buy a car subwoofer which parameters i know ?
This is extremely interesting information thanks for sharing
Glad you enjoyed it
my problem on ported box on my cheap computer speaker watching movies is to loud and if playing in the lower volume no bass at all so i tried to remove the port and sealed it and finaly i enjoy watching movies . i dont want to annoy neighbor specially watching at night . GREAT VID !
Ported tends to give you more output.
Another great video
Thank you sir.
I have 3 types of 10" subwoofers in my listening room. 1. a downfiring powered subwoofer. 2. a Kerf Subwoofer and 3. a Sealed subwoofer. I am using Revel 10" drivers in all of them. To my personal taste, the best sound in the Sealed subwoofer, I just have it because a good friend gave it to me, after over 35 years of buying and building subwoofers, I can tell you that my last subwoofer ( the sealed one ) that I modified, is, by far, the best in sound performance, took me all these years to find out. Really worth to have sealed subwoofers, BUT they tend to be bigger than the others and need at least 30% more power.
A lot of people feel the same way.
I personally dont know too much about building boxes but, what if you were to preset the walls and woofer in the box and outline the underside where the breathing hole is and cut it out, would it help?
nice testing. larger probably useful in the bass hobby, only around 2db difference at 20hz from S to M box. finally got to DIY more than 10 years ago a Sony Xplod 12" 300 watts ported. turns out it was too much bass than I ever dreamed of and poor with beats, feels slow while taking out a huge chunk of trunk space. good thing the industry has a lot power in such small packages while being cheaper with inflation.
I just downloaded this I built my boxes by ear till now I'm wondering how good I have been doing
I have Sundown SA12 v2"s CRAMMED into a box under my seat in my silverado extended cab, it was a down firing box, I put 1 1/8 mdf to block the bottom hole and cut holes in the top and then added 1" spacers AND had to grind the mdf to fit the magnet. It dose hit hard but I wonder if it would hit harder with shallow subs or just sound way cleaner. I'm going for as much feelable bass as possible, I'm obnoxious lol
I am not a huge fan of shallow subs, they often need the same airspace as a normal sub. It is just easier to cram them into an undersized box.
Interesting. I was just wondering how to cram a subwoofer into my teensy minitruck. Thanks.
Glad I could help
I’m confused. The rated stock frequency of the sub goes down to 45hz, but the chart shows them what I take to be able to still play 20hz but at lower decibels? Are subs capable of playing some frequency below the rated hz frequency?
So. Adding height or width to a box that has to be shallow is ok ? Like. I got a build coming up that had to be as shallow as possible but I planned on adding height for air volume and to raise them from the floor.
could you help me with some advices please? I'm into deep, tight bass, I had a JBL gto1202d in a sealed box, that made my car feel like a massage prolonged session.
Now I'm thinking about getting some deep tight bass to my PC, but going with a 6.5 inch subwoofer.
I was planning to integrate it in the desk, like blend it inside on of the shelves, not sure if you manage to picture my plan.
In terms of drivers I saw a ground zero rated at 100 rms for about 70€, or a digital design rated at 250w rms. I already got a small DIY class D amplifier that should supposedly push about 100 watts at the very best.
This sub would have to integrate into my existing bookshelf speakers, a pair of microlab solo 6c speakers that are rated at 50watts rms per channel, so 100 rms combined.
With all this in mind, I'm still not sure whether a 6.5 inch is enough to achieve something deep and tight or I'll just end up with boomy bass.
By the way, when I tested the JBL inside my home, there were differences, I could hear everything rattle around me, windows, doors, furniture, but I could hardly hear any bass at all, it was so strange, perhaps it was due to the sealed enclosure, which makes me ask you this too, should I avoid sealed? I was planning to build this sealed.
Thanks!
The difference in the Group Delay would have been interesting.
Now that the boxes are built, how about retesting them but with ports in the front corners?
I would love to see the difference (if there is any) in the shape of the box. Specifically for a behind the seat truck box.
I'm not aware of anything definitive that says the shape of the enclosure matters.
i have a 10" ds18 car subwoofer rated down to 30hz and the manufacturer recommends about 1.25-1.4 cubic feet, my enclosure is only about 0.8 or so it's very small it's a ported pre fab tuned to around 47hz because I've never built a box I'm worried to try and fail and since I'm on a very tight budget at the moment (broke 17 year old struggling to make money😂) it hits nicely especially at 40hz i still would've expect it to hit louder but probs the box
and above up to about 59hz or so any higher and it looses bass badly (because the box is custom tuned lower because it was originally tuned way too high) and anything under 40 the bass starts to get quieter until about 32hz then at 30 and 29 it gets even more quiet (which is the lowest it can play) anything lower is bad harmonics even at anything lower than 36-38 can't be heard if you're close to the subwoofer you have to be in a certain position in the room for it to become actual bass and not just harmonics,
do you think my box is the problem? (should also mention the thickness of the mdf is 0.69" and sometimes under heavier loads it can flex a little) I'm pretty sure it is just wanted to confirm LOL
Yeah, the box is holding you back.
When i was a kid i saw a woofer with the back covered with drum skin. Can you experiment in a video with a drum skin rear? what quality of bass and sound we get from it.
Sealed enclosures have a much better impulse response, and thus perform better especially when it comes to percussion. It tends to feel "tighter" and more accurate. If you just want lots of low end, sure go for the ported. But generally speaking, the sealed enclosure will feel more musical, which will ultimately sound and feel better.
A lot of people agree with you.
Go ported servo subs. Better control that sealed and deep controlled bass.
Nice video. It was a refresher for me. BTW 3 dB may be 2x power, but it is barely audible. As another said, porting will allow for smaller enclosures. I prefer sealed myself.
Thank you for this video. What about underseat and spare tire subs? Because the boxes are so small, smaller subs should perform better? Is that correct? So a 6" underseat or spare tire sub would sound better than an 8" or 10" in a similar enclosure / setup?
Hard to say for sure, but in general under seat and spare tire subs will have less output compared to the same driver in a big rectangular box. Some people run under seat subs and are happy with them.
When I made my first Speakers, I was told to size the Enclosure at 9 cubic feet.
That works so well.
That is huge.
@@DIYAudioGuy
Not so big in my Living Room. I was told to make a horn shap over my mouth and then sing. That is what smaller speakers sound like in comparison. That was 45 years ago and they still are the best sound I have heard. Full and Natural. Used Etone (Guitar 12" Alloy Frame) Speakers up to 350 hz and then Philips (Holland) Domed Mid and Tweeters.
Nice to see someone wearing safety equipment!
I don't wear it as often as I should.
Maybe in another video you could try making an enclosure with an air tight adjustable back panel you could move in an out to “tune” the box for optimal boomage.
Anyone know of any 1000rms range 12s that are designed to play in 1 to 1.5net sealed boxes and have a low f3 point?
How much can you increase the volume of the box before there is no additional low frequency migration in the results? The point of deminished return.
Sealed sounds better across a large frequency range. Ported is substantially louder at the tuning frequency. It is what it is.
One thing no one ever mentions is that you need a stronger box for ported. They build way more internal pressure than sealed.
Another thing to consider is that sealed boxes make the speaker easier to blow with frequencies below tuning.
Generally not a big problem with low tuned boxes, but if you're running a turntable, microphone(s), or showing movies, you can intruduce inaudible subsonic frequencies that can absolutely blow your speaker. Sounds below box tuning frequency will make the driver absolutely lose control of itself. And distortion is what usually blows speakers.
Moral of the story is, if you run ported boxes, use a high pass crossover at the tuning frequency or slightly above it. Even a basic FMOD is excellent, cheap insurance for ported boxes.
My ported subs are tuned to 30hz and i run a 40hz higg pass FMOD. At 12db/octave the difference is inaudible. But my subs are nicely protected.
AMAZING VIDEO! But it makes me wonder: What if those same boxes were ported? How would they compare to sealed and each other?
Good question.
Thank you for all the great videos. I only have one question. As long as you have the necessary air space, does enclosure shape matter? ( like T shaped boxes that have pockets on each side )
I don't think it does, but I'm not aware of anyone who's done an actual test to prove it one way or the other.
It does. For higher frequencies the box shape can affect stuff like reflections and standing waves. In a low frequency sub box it doesn't really matter. Although at the extremes you might not be able to utilize all the airspace as effectively.
@@DIYAudioGuy A real good example is the Klipshorn. New verson against the old ( it hold record longest in production) a new testin "Stereophile recently . Reviewer was not to test old one long ago as would sound bad new ones do work without corner placement but still best in corner sorry typos age and 20 or so as real draftsman taking tolls A side note I think it still holds the efficiency record
Back in the 70's i had pioneer 5.5" door speakers? And made outa 1×6 boxes just big enough for the speaker to fit the baffle. Open back, luckily just tall enough to lock in the back window of the nova standin up facin forward. Open back rules. Later I put a back on and even my buddy said they were louder open back
Hello, I am from Iran, can your box shield damage the sub's mechanical factor in the long run?؟؟؟