Logic Pro - Stacks vs. VCAs vs. Groups (What's the Difference?)
Вставка
- Опубліковано 18 чер 2024
- In this video I demonstrate the difference between summing stacks, VCAs, folder stacks, and groups!
Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor
Check out my older "deep-dive" tutorial on this topic here | • Logic Pro X - Busses v...
For mixing/mastering work, contact me at my website | carneymediagroup.com
Follow MusicTechHelpGuy on Instagram | / musictechhelpguy
Support the channel on Patreon | / musictechhelpguy
#logicpro #logicprox #tutorial
Timestamps:
0:00 Introduction
0:27 Sponsor Segment
1:05 Summing Stacks
3:35 VCAs
5:39 Folder Stacks
6:08 Groups
8:47 VCAs in Groups
In this video I demonstrate the difference between summing stacks, VCAs, folder stacks, and groups!
Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor
Check out my older "deep-dive" tutorial on this topic here | ua-cam.com/video/JRe68qPVnPU/v-deo.html
For mixing/mastering work, contact me at my website | carneymediagroup.com
Follow MusicTechHelpGuy on Instagram | instagram.com/musictechhelpguy
Support the channel on Patreon | patreon.com/musictechhelpguy
Timestamps:
0:00 Introduction
0:27 Sponsor Segment
1:05 Summing Stacks
3:35 VCAs
5:39 Folder Stacks
6:08 Groups
8:47 VCAs in Groups
Excellent video. Much needed information
Always something to learn in Logic. Thank goodness for your videos. Thank you!
absolutely useful, clear and precise... as always. thank you !
Thank you so much for making such great logic content. I’ve been using it for 15 years and you still teach me new things! You’re a legend.
Yeah, I suppose it can get repetitive, but I just wanted to pile on this comment. These features are super useful and your video made them crystal clear. You're truly making a contribution to lots of people's lives by helping us with our artistic pursuits. Thank you so much!
Thanks for this concise review.
Thank you! It helped me better understand! I am using track stacks and will continue to work that way, but I now know why I don't use VCA or groups, and not only not using because I don't know what they do!
super helpful video dude thx so much
really good video!!
Thanks!
And also, I'd say, control multiple busses' volume faders within a dedicated group or vca in order to make automations easier and making more busses at once share the same operations and happenings but keeping the summing plug-in and individual settings distinct! 8-)
Always the best for Logic Pro! 💫
(Don’t know what that emoji means - but it has a star and it’s shiny!)
Gianni❤
so could you explain how a vca would effect the input level on say a parallel compression bus? would this be the same as routing the pre-fader parallel bus n the summing stack to a volume bus to control the stereo output without effecting the input signal? appreciate the videos you’ve clarified a lot tips n strategies for me ✍🏽
8:50 so VCA's essentially become something like a sub group in mixing desks? I generally always use summing stacks for mixing, it's become part of my workflow, but using groups and VCA's has recalled my attention - btw great and useful video, thanks!
Exactly! They are just like sub groups, and they don't pass any signal through them.
@@brianpylant4617 x2
@@brianpylant4617yes good question
This a nice and informative video, Honestly what is the benefit to use the VCA fader compared to the Summing stack?
For many people, myself include, there isn't much of a benefit. I almost never use VCA's unless I want group volume control over certain tracks, but not others within a summing stack. I'll give you one recent example -- I had a project with 3 layered acoustic guitar parts, each recorded in stereo. The left and right channels for each guitar were on mono tracks, and panned accordingly. So 6 mono tracks total, 3 guitar parts. I put each group of 2 guitars in a VCA for individual volume control to keep the left and right channels the same volume, and then put all 6 tracks inside of a summing stack for buss processing. That's one example, where I would use them, but I know a lot of people who still like to use them, especially composer-types. The only real benefit is you don't waste a bus.
@@MusicTechHelpGuy You mean the VCA's track can put it into the summing stack! Omg, it sounds cool, thank you so much!
@@leeahegg2377 They don't necessarily "input" into the summing stack, because VCAs don't actually pass any signal through them, but you can assign VCAs to tracks within track stacks.
cool
👍👍👍
Why don’t the faders move when assigned to a VCA ?
Because it’s a “voltage” adjustment, not a fader adjustment.
I just send tracks to a common aux snd say name it, eg drums, have all controls and a master volume, why do anything else?
That's the same thing as a summing stack. A summing stack is an aux track with multiple channels routed into it, but it also has the added benefit of the folder organization. But there's no difference from a signal flow and routing standpoint than what you are describing. That's the way I did it for years before summing stacks were introduced.
It's really a matter of preference and what's comfortable and natural to you, I think. Like Josh, once Track Stacks were introduced in Logic, that became my default over bussing some tracks to an aux and naming it. Those two operations are combined when you create a summing stack (with a keyboard shortcut, if you like those) and I like that that "aux" lives to the left of the tracks it's controlling, and that you can collapse it to keep the mixer lean and mean. :-)
brother, you need some exfoliating products to properly clean your face.
Remember to use a proper exfoliating glove or product instead of your hand and wash your face with cold water. Also remember to drink plenty of water.
these tips will help you to clear all the pimples on your face and improve your money maker.
So there’s no reason to use a VCA over a summing stack?
For my mixing workflow, no. I almost never use VCA's. However, I know many people who use VCA's all the time. If you want the group volume control without the summing, and without wasting any busses, that's when you could use a VCA. I know a lot of composer types that use VCAs to group the volume control of multiple instruments. 10 years ago, I used groups almost exclusively, but once they added track stacks, that's all I use now.
There's a reason for everything, really depends on what you do or want. Imagine for example some orchestra, typical sections strings, winds, metals. Now let's say you want all sections leader to control simultaneously, First violin, viola, cello, recorder etc... this might be one idea to use a group ,without having them "seated" close to each other (neither in the orchestra nor at your console hahaha. This is just one hypothetical example, the deeper you get into mixing more than just "typical" drums, bass, guitar etc band setup, the more reasons you will see for each option (or even, to combine them for several purposes). What I love in Logic, that the Apple guys did not put old stuff to legacy, but instead keeping them as another option you can choose from.
Honestly, all you would ever need would be summing stacks .
For my mixing workflow, yes. Summing stacks are really all I use. But I know plenty of people who like to use VCAs. If you need grouped volume control, but don't want the summing, or don't want to waste any busses, that's a way to do it. I know a lot of composer types that use VCAs to group the volume control of multiple instruments. 10 years ago, I used groups almost exclusively, but once they added track stacks, that's all I use now.
Thanks!
Thanks so much Raymond, I appreciate the support!