In this informative video, i will show you how to extend your WiFi range wirelessly using an OpenWRT router. Subscribe now, it's free / netvn82 #netvn #wifi #openwrt
Thank you. This was exactly what I was looking for. Coming from DD-WRT, which is more user friendly, Open WRT is really challenging to setup and I got really frustrated. I followed this video with attention and I finally was able to setup a wifi extender in my Netgear XR500 w/ OpenWRT.
I have installed proto relay and rebooted many times but relay bridge never appears as a protocol. I am using a Asus RT-ACRH13 aka rt-ac58u. Are there issues with certain models that don’t allow the bridge protocol?
This works without any cables between the routers, thanks a lot! Subbed! But still, what if I want to use LAN ports of that repeater later? Say like, a PC. What to do then?
My solution was to create a static route on the repeater, allowing me to access the lan network and the internet through the LAN ports just as if I had connected through Wi-Fi. Static route: Interface: lan Target: 0.0.0.0 Mask: 0.0.0.0 Gateway: your main router's ip address
Thank you! I live in Ukraine, as a result of the attack, our electricity is sometimes cut off, I configured my old router and now it sends me a message in telegram when the electricity appears or disappears! 😇
What if I connect wirelessly to the main router, but I want a cable connection from the access point/repeater whatever? This way LAN ports are totally useless. What if I want to plug in a PC there?
how to connect 2 internet in openwrt . first internet connect to openwrt router using wan port configured dhcp and second internet connect to openwrt router using wireless bridge [wireless repeter].show to wireless SSID like INTERNET 1[ INTERNET CONFIGURED OPENWRT ROUTER USING WAN DHCP] and second SSID like INTERNET 2[INTERNET CONFIGURED OPENWRT WIRELESS BRIDGE] PLEASE HELP ME
In my main router I don't have functionality to fix the channel so how can I proceed here. When my main router channel changes then extended router get disconnected and I have to reconfigure so kindly provide me the solution.
i think you could place it in auto mode at the channel in your client networksetting. Thats just what im thinking but idk if it will work because i dont have that problem here
no idea what adres have internet router. i have to watch it 3 times. poor video. no diagram what it should like. there is no explenation what device is currently configured. it is a mess.
You gave life to my Dlink Dir 853 from itisalat uae
It was like a waste after moving out of uae
Thank you so much ❤️
Make sure to disable bandsteering on main router and keep the same dns as main router.
Thank you. This was exactly what I was looking for. Coming from DD-WRT, which is more user friendly, Open WRT is really challenging to setup and I got really frustrated. I followed this video with attention and I finally was able to setup a wifi extender in my Netgear XR500 w/ OpenWRT.
Very good video with explanation. Thank you and keep it up!
Great. Thanks for this video. Helped a lot. I just have some routing issues, fixed by my self.
Thank you for your video
Перевод на русский
I have installed proto relay and rebooted many times but relay bridge never appears as a protocol. I am using a Asus RT-ACRH13 aka rt-ac58u. Are there issues with certain models that don’t allow the bridge protocol?
Please tell me how to set up a WireGuard VPN on such a repeater?
This works without any cables between the routers, thanks a lot! Subbed! But still, what if I want to use LAN ports of that repeater later? Say like, a PC. What to do then?
My solution was to create a static route on the repeater, allowing me to access the lan network and the internet through the LAN ports just as if I had connected through Wi-Fi.
Static route:
Interface: lan
Target: 0.0.0.0
Mask: 0.0.0.0
Gateway: your main router's ip address
Awesome!!!
Good videos Grettings!!!
Thanks \m/
Thank you very much for your tutorial!
THX
Thank you, you very helped me.
Thank you! I live in Ukraine, as a result of the attack, our electricity is sometimes cut off, I configured my old router and now it sends me a message in telegram when the electricity appears or disappears! 😇
Thank you so much!!!
Do you need to disable dhcp in the bridge router?
Can you do a video on wireguard setup on dumb AP using openwrt?
Can you do tutorial for WiFi Repeater using OpenWRT WDS feature?
What if I connect wirelessly to the main router, but I want a cable connection from the access point/repeater whatever? This way LAN ports are totally useless. What if I want to plug in a PC there?
What this Router Brand Bro ?
Life saver
how to connect 2 internet in openwrt . first internet connect to openwrt router using wan port configured dhcp and second internet connect to openwrt router using wireless bridge [wireless repeter].show to wireless SSID like INTERNET 1[ INTERNET CONFIGURED OPENWRT ROUTER USING WAN DHCP] and second SSID like INTERNET 2[INTERNET CONFIGURED OPENWRT WIRELESS BRIDGE] PLEASE HELP ME
Mesh?
How install wifi openWrt?
In my main router I don't have functionality to fix the channel so how can I proceed here. When my main router channel changes then extended router get disconnected and I have to reconfigure so kindly provide me the solution.
i think you could place it in auto mode at the channel in your client networksetting. Thats just what im thinking but idk if it will work because i dont have that problem here
Clonando mac
no idea what adres have internet router. i have to watch it 3 times. poor video. no diagram what it should like. there is no explenation what device is currently configured. it is a mess.
like the ip address? you could go to cmd on windows and type ipconfig/all then copy the Default Gateway address hope this help
Just type ipconfig into command prompt and look for gateway
Thanks ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤