Wow. I just went to this website. And they have the bare shell of all of the current husky toolbox models. Just without the badging. That’s crazy that husky buys their boxes from someone else puts a badge on them and marks up the price probably. I’m waiting to hear back from them about parts for my specific box set up. I’ll update as follows.
Thanks for sharing this. I can imagine quite a few toolboxes are thrown away instead of fixed. Good that the manufacturer at least provide spare parts. Those sliders are usually all from a few select factories, so by some google investigation it's sometimes possible to find them even for cheaper stuff that doesn't provide spare part availability.
@etischer I encountered the same problem with my Newer Age Project center drawer, however my problem was when reinstalling the drawers after initial assembly and those sliders on yours look identical to mine. I guess my error was going from top to bottom to begin with. I currently have a dremel, can I get away with using that with the same type of attachment! I will get the Milwaukee rivet gun to add to my M12 Impact gun, Hammer drill collection! I was told to go with the Milwaukee instead of the dewalt when I went in for the impact gun!
Thank you! Are the rivets all same length? Replacing my rivets in my husky workbench as well. so do you use 3/16 or 5/32's? and they are 1/16-1/8 in long ? Thank you
It's a good box, but I do have a second drawer slide that's starting to stick and needs to be replaced. The lock mechanism doesn't work. But I'm still happy with the box overall, it gets daily use. It's deeper than the other boxes which is great, it offers so much more drawer real estate.
Mine just keep sliding out and I haven’t looked closely at the root cause of it but I took them out. I like to start things and then forget to finish them
I don't have a part number, but I have my case number, maybe they can look it up that way? If you get a part number, please add it in a comment for others! Case: 30845782 Husky - Workbench Tool Chest - Broken Sliders [ ref:_00D50JUFY._5001T1mMfRA:ref ] Sure, the slides are $40 for the set. Thank you, Amanda Graue Customer Service Manager JENGER LLC 1-866-441-5080 Hours: Mon-Fri 8a-5p CST
I recently tried to order new slides for my box and they said they were discontinued. I even asked for a part number for them to try and find them on my own and they couldn’t find that either. 🤦🏽♂️🤷🏼♂️
@@budrinker don’t make my style husky box I ended up doin two days of searching online lookin for that particular design slide and found it on Amazon but it’s coming from China
@@kevinmillier5999 I found them off amazon they came from China tho it took a week but I had to do some modifications to make them work but it’s all good now
The locking mechanism and the vise mount you show at the end, are truly the hidden Crackerjack Prize in this video. Thanks!!
Wow. I just went to this website. And they have the bare shell of all of the current husky toolbox models. Just without the badging. That’s crazy that husky buys their boxes from someone else puts a badge on them and marks up the price probably. I’m waiting to hear back from them about parts for my specific box set up. I’ll update as follows.
Thanks for sharing this. I can imagine quite a few toolboxes are thrown away instead of fixed. Good that the manufacturer at least provide spare parts. Those sliders are usually all from a few select factories, so by some google investigation it's sometimes possible to find them even for cheaper stuff that doesn't provide spare part availability.
That was amazing, I'm glad I watched your video first.
Good job, Bro.
Nice. Sliced my finger up real good when my drawer broke
Thnx for the video I have to make the same repair on my toolbox. I also have an excuse to buy some more tools lol.
I have a drawer bent too thank you i am going to call and get my drawer fix.
Great video! Thanks for sharing
@etischer I encountered the same problem with my Newer Age Project center drawer, however my problem was when reinstalling the drawers after initial assembly and those sliders on yours look identical to mine. I guess my error was going from top to bottom to begin with. I currently have a dremel, can I get away with using that with the same type of attachment! I will get the Milwaukee rivet gun to add to my M12 Impact gun, Hammer drill collection! I was told to go with the Milwaukee instead of the dewalt when I went in for the impact gun!
I'll take one custom drawer locking bar. Thank you.
Thank you! Are the rivets all same length? Replacing my rivets in my husky workbench as well. so do you use 3/16 or 5/32's? and they are 1/16-1/8 in long ? Thank you
Good video!
Is there a technician in Miami, FL
Thanks.
Thank You
Thank you for this. Can you not just replace the original rivets with screws for ease of replacement if they break again?
There's no easy way to put a nut on the back side to attach a screw. You really need to use blind rivets.
@@etischer maybe self tapping screws?
Self tapping screws would likely tear out
Another Milwaukee commercial? Lol
Did your box not come with the liners? I have the same box and I've been looking for the liners for a while now.
Mine came with liners
@@etischer I wish I could say the same lol.
I'm looking at getting that 66" husky box for my garage how do you like it still?
It's a good box, but I do have a second drawer slide that's starting to stick and needs to be replaced. The lock mechanism doesn't work. But I'm still happy with the box overall, it gets daily use. It's deeper than the other boxes which is great, it offers so much more drawer real estate.
My drawers keep sliding out. Is that why you did this? Or was there too much play in them cause of overweight?
All the bearings fell out, and the drawer slide separated into two pieces.
Mine just keep sliding out and I haven’t looked closely at the root cause of it but I took them out. I like to start things and then forget to finish them
@@etischerthanks for this video, my boss would cut my head off no matter the circumstances, now I can fix the mis-hap
“I started out by removing the drawer (which I WILL NOT SHOW YOU because that’s not an important step), but I’ll show you how to vacuum.
Or can u show the part number u used to order them from that company u called and ordered
I don't have a part number, but I have my case number, maybe they can look it up that way? If you get a part number, please add it in a comment for others!
Case: 30845782 Husky - Workbench Tool Chest - Broken Sliders
[ ref:_00D50JUFY._5001T1mMfRA:ref ]
Sure, the slides are $40 for the set.
Thank you,
Amanda Graue
Customer Service Manager
JENGER LLC
1-866-441-5080
Hours: Mon-Fri 8a-5p CST
I recently tried to order new slides for my box and they said they were discontinued. I even asked for a part number for them to try and find them on my own and they couldn’t find that either. 🤦🏽♂️🤷🏼♂️
I was born in Geelong, Victoria, Australia. It is pronounced, Jee- long not Ge-long.
That company don’t sell the slides I called them called the Home Depot line they don’t sell them anymore either now I’m stuck
Did you call Geelong Manufacturing. My tool box was 2-3 years old and they sent me a free drawer glide.
@@budrinker don’t make my style husky box I ended up doin two days of searching online lookin for that particular design slide and found it on Amazon but it’s coming from China
@@ken79bu what model was it at the end? Looking for some slides here too...
@@kevinmillier5999 I found them off amazon they came from China tho it took a week but I had to do some modifications to make them work but it’s all good now
@@ken79bu can you let us know the item number or post a link to the ones you ordered. I’m having trouble finding the correct sliders.