Installing Switchbacks on the ST1300
Вставка
- Опубліковано 29 сер 2024
- In this video i install the switchback plug and play kit from LightenUpgrade on the ST1300.
********************************************
If you would like to help keep the lights on and contribute to the channel you can donate as little as 1$ per video or a maximum per month on my Patreon page - www.patreon.com/gtsgarage
If you would prefer a one off donation as appreciation for something you've learnt on the channel, you can donate to paypal.me/buckinghamjf
That was a great help now I have my Switchback lights all fitted and working thanks for putting up the video.
That is an impressive upgrade, and really great value for all you get in the kit. If I had a Pan I’d definitely be doing it!
Fantastic bit of kit. Another great fitment job too.
Great video and they look miles better than the original!
I have these on my st1300... making the bike more visible is always a good idea. I have thought about putting red led reflector lights in the panniers. Should be easy to do but would need to disconnect them when every time the panniers are removed. Keep up the good work.
Cheers Steve, I did start looking at the different modifications people have done to the panniers, but like you, its the power thing that puts me off. Very much like the LED strips in the fairing and around the bottom of the bike, great idea, but its even more cabling to work around when removing the plastics.
@@GTsGarage I've put some amber led lights in the little tiny holes in the mirror trim. Can be seen from the rear and also gives me an indication that I have left them on by mistake. I find depending on seat height and my position I can't always see the indicator lights on the dash as they are set high above the speedo and rev dial.
A very nice addition GT.
undo the cable tie on the mirror covers and unplug the whole unit its easier to work on. before you replace the clear lens remove the black foam and sticky tape residue. when the foam is missing it gives you a glow around the mirror which is useful at night with cars closeby. you dont need to remove the dash or the screen or the top panel to do this you can do it from the left main fairing and reach up under the front and cable tie the lead in place. with the amount of spare plugs on the aux harness im surprised he did a piggyback and not a 9 block as nothing uses the 9 i think
Why remove the fairing for the headlight bulb replacement. Just turn the handlebars and insert from below!
Wondering How hard is to replace headlights for LED’s is it like most of of the ST jobs “ remove fairing” ? 😂
what was with the relay that came with the kit? Why was the opposite side lamp blinking when the turn signal was flashing?
GT, another very good video from you. Do you still have your ST1300 or did you get rid of it when the bought the Triumph?
The reason I ask is that I am interested in this upgrade but as it is expensive I am worried that the new front lights may fail the MOT and I've wasted my money. My understanding of the regs is that you can only have LEDs if the manufacturer fitted them originally. So did yours pass the MOT ok?
Hi I replace my main headlight bulbs with LEDs and it went through MOT without a mention. As long as the beam is well adjusted, it shouldn't be an issue?
@@PDG1956 Thanks Jason
GT can you make a video doing the ligthenupgrade LED lights on the instrument cluster?
Hi,
Will be doing a few more upgrades, not sure about the illumination, unless i can get a panel from the breakers, would like to have a practice stab before doing my own :) Ride safe - jason
👍
Hi do you have the link and address of the person who surplied the lights regards jake
Hi Jake, apologies not getting back to you sooner. The firm are lighenupgrade, they can be contacted at there facebook group facebook.com/ledlightenupgrade/posts/honda-pan-european-st1300-led-upgrade-package-for-brake-lights-indicators-and-si/1736877533193008/
Var har du köpt lamporna ? Vilket art nr ?
Where can I buy those lights? I've been looking all over