Це відео не доступне.
Перепрошуємо.
Toyota Prado 150 series Stereo Removal and new head unit installation part 3
Вставка
- Опубліковано 1 чер 2020
- Removal factory stereo and screen relocate down instead prepare to install new head unit
visit my workshop at / gbpautosound. .
Thanks mate! About to do my head unit in my prado so this is super helpful
My 2013 TX doesn’t have the lower screen, just the one below the a/c vents. What was the lower screen for ?
Hi can you please guide me i have fixed new screen I would like to know how to connect the temperature display screen below like how u did in this video what all is needed for tht what type connectors? Please let me know in detail
Hi, where can I buy such an adapter for my on-board computer?
Awesome video. keep working Hard! #great :d
Hi Mate thank you so much for the video I'm based in france and I'm facing a few issues my Land has an amplifier therefore can i plug the original plugs direcly to the new android 2 din Radio set or shall i get an harness to connect the new set directly to the amplifier?
I have another question you managed to get the back camera to work on the new radio set or is it still on the small on board computer screen ?
thanks a lot
best
Hi Choedpong ... thanks for the video ...
what model of radio is that?
Hi, can you put a video on how to remove the A-pillar on the 150 prado?
I have 2012 prado witch smart radio to buy with back up camera from pioneer please ?
Hi Choedpon,
Thanks for the great video it has helped allot. Did you use the stock USB location and what year is the prado? If so did you use Aerpro APTOUSB1. I am trying to work out on the video what adapter you used and if you used an adapter?
Put APUSBTO4 replace factory usb
Hi Choedpong, my sw does not work, what do you think is the problem, cheers.
ไม่ทราบว่าอยู่แถวไหนหรอครับผมอยู่ออสเตรเลียครับอยากให้ติดตั้งให้จังครับ🙇🏻♂️
อยู่ซิดนีย์ครับ รุ่นนี้สั่งออนไล์เลยครับ
Hi I installed a 10 inch android on mines but what can I do to replace the old stereo is there a pocket or something I can use
Please go back to watch on part one , its will show you all part you need to done the job.
Hi, can you please list the aerpro products you used to do this job. Do you need anything extra for steering wheel controls or just Toyota ISO harness to aerpro head unit harness??
Jay Smith FP9166 and APVTY03
@@choedpongyossapol3501 thanks mate and did you use APP0141 to connect stock harness to aftermarket head unit? Just wondering if that's all you need to get steering controls to work on new head unit. Thanks.
Jay Smith use the steering wheel 3.5mm remote cable from new head unit connect to 20pin socket pin 3 to key2 pin 4 to key 1 pin 5 to Ground
@@choedpongyossapol3501 my new head unit only has key 1 and key 2. Could you please explain where i need to wire these into for the steering wheel controls to work?
@@Jonathan-dl4nb can read above replied to Jay Smith, if still not get how to do that better you would buy " aerpro.com/chto3c# " and patch lead "aerpro.com/apunipl2" then soldering following the wire colour it may safe and easier than hard wire up. In the video i did not use that part number for save money for my customer.
Hi Choedpong, just wondering what brand of head unit do you use for this project?
I have done many of them all standard DIN will fit with fascia kit. this video the customer supplied me Kenwood
Hi bro how are u plz solve 1 problem i am install tesla in parado 2010 but orignal amplifire not working plz solve my problem
Toyota jbl amp volume control by data bit rate need bypass hi level through car speaker or google for harness.
@@choedpongyossapol3501 hola puedes decirme qué marca y modelo es la pantalla y donde pedirla ? Y todos los cables y adaptadores que
@@choedpongyossapol3501 y todos los cables que hay que utilizar
รุ่นนี้หาซื้อได้ที่ไหนหรอครับผม?
สั่งออนไล์เลยครับ
Where is the reverse camera connection
สวัสดีครับผม