6.0 POWERSTROKE SHORT BLOCK ASSEMBLY | F250 BUILD PART 2
Вставка
- Опубліковано 29 сер 2024
- This is part two of a multi video series on my 06 F350 6.0 Powerstroke rebuild!
If you are looking to have your 6.0 Powerstroke brought back to life check out my shop Sin City Diesel & Offroad and give us a call to see what we can do! We specialize in Cummins, Duramax, and Powerstroke diesel pick up trucks.
Thanks to those that support me and this channel:
Sin City Diesel & Offroad: www.sincitydie...
Mishimoto: www.mishimoto....
Fass Fuel Systems: fassride.com/
Randy's Transmission: randys-transmi...
Dynomite Diesel Products: dynomitediesel...
Xtreme Diesel Performance: www.xtremedies...
Fleece Performance: www.fleeceperf...
Follow me on TikTok @Western Diesels
Follow my personal IG @daddysmoney24v
Follow my shop on Facebook & Instagram @sincitydieselandoffroad
As always feel free to leave some feedback or ask any questions!
That was cool how you out those Pistons n Rods together. I'm gonna try that.
Thanks for sharing!
What size is that single berry hone? Have a block sitting on the stand and would really like to clean up the lifter bores
Awesome videos.
Thank you!
Good stuff.
Thank you!
Use Motorcraft TA-31 it’s fantastic. Very good stuff a little expensive but was designed for the Diesel engines.
Yeah I’ve had great luck with Permatex gray
@@FrankBUILTperformance yeah I use it on the bed plates and the oil pan adapter plate. It’s nice to have a 6.0 that doesn’t leak oil. Very strong bottom ends
What did u gap the top and 2nd piston ring gaps to? Great video, good u didn't forget that oil plug by the cam gear, that would have sucked
Most definitely! I’ll have to check my notes. Hopefully I have them and not lost in the move lol
It's no biggy was just wondering
How much torque on that channel lock
I have cuestion for you ! How the 6.0 blow out the stamp pipe o - ring ?
how many foot punds to turn the crank after building it to a short block?
OLÁ. 24/12/23 Assisti a desmontagem do motor. Comento apenas o que vi no vídeo. A análise das costas das bronzinas (chapa de aço) é tão importante (ou até mais) que o lado da liga ante fricção. Tratando-se de um motor com grande alteração no sistema de lubrificação e de componentes internos do motor, deveriam identificar o "perfil" de todas as bronzinas com um micrômetro centesimal 0 a 25mm com 1 ponta redonda. Não vi conferirem o comprimento e aperto das bronzinas. (e o uso de MARRETA?) O assunto é muito mais longo, ABRAÇOS... Roberto Udo Krapf
which loctite are you using on the lifter tray retainers 271 or 272?
Thanks for the video1 What kind of clearance to you want on the oil squirters with the new pistons. Thanks again.
Not sure I understand your question? I mean make sure they don’t hit?
Timing alognments is basically in between the valley if someone dont have tool.
Yeah how I did it before. But these tools are like $80 so it’s not a bad thing to have
Like the video man… I’m rebuilding my 6.0 as we speak.. How did you make the bracket that attaches to the motor mount for the stand??
Thanks! An employee of mine back in the day made them from some schedule 40 pipe & 1/4” plate. Kinda sucks because HF doesn’t make these stands any more.
Hello I have a question how much you charge 6.0 engine bulletproof stage 3
Question::
If my shortblock looks good can you just order standard bearings and rings?
Yup!
Hey, is the oil hole for the lifters supposed to face the front of the motor?
Orientation doesn’t matter
What the cost on the stage 4 build? I have a 6.0 with 245k on it and i think it time to give it freshen up
$18,000 is my guess
If a customer sends you a bare block . And everything you need to build a short block. More less how much labor cost is that? Just a ball park answer. Thx
I don’t use customer supplied parts on my engine builds. Too many variables. If you’d like to email sales@frankbuiltperformance.com I can get you a quote. I should have a 6.0 short block available soon
@@FrankBUILTperformance 10-4 I got you. Thx again buddy
Does anyone!!!!! rotate the motor after getting the crank, pistons and cam in, or does everyone wait until they install the engine to find out that they jammed it up and must remove and tear it apart5 agtain?
Always do
Do you plastic gauge all the bearings, or….?
I use micrometer / dial bore.
Can u do my 6.0 power stroke
If you in new york rockland County
How did the engine hold up?
Still going strong around 7k miles on it, no issues
Can the 6.0 bebuild to increase the horse power up to 400 to 425 hp and have a reliable pulling motor ? ?
Absolutely can
@@brentambler3506 is there a build plan to do this. I have 2004 with the good bad 6.0. I pull horse trailer with it long distance and need the reliably of a stock engine but need more hp to climb long grades.
@@quinnsullivan7679 air dog fuel pump air to oil cooler delete plate EGR delete if you can and a sct X4 with some mild tunes and maybe get your ficm sent to be tuned with a eco or atlas 40
155cc injectors and a KC Stage 1 is a nice set up
Bro where did you go to school I wish I was a diesel mechanic
Learned on the job, from people willing to teach, internet / youtube, and a lot of trial & error.
What engine stand adaptive is the
Custom one an ex employee made for me
Where are you located?
Vegas
No need to soak lifters?
Seems like some people say to do it, some people say not to. I don’t and haven’t had an issue
Most lifter companies say not to soak their lifters.
CLEAN THE SHIT OUT OF THE BLOCK, AND THEN PICK THE CRANK OFF THE DIRTY SHOP FLOOR AND AS YOU SAY SLAM IT IN. NO THANK YOU.