It's really great that in your videos you mention if you make a mistake, so others can avoid the same mistake by watching the video. Thank you for the video, and keep up the good work! I haven't been following your videos as much since I switched car brands, as I needed more seats than just 7. But Volvo is always in my heart, and it's great to come back and watch your videos because you've always been a Volvo lover and you take great care of your car
Thanks for the info on the backwards seal, I had to go look at mine and I also put mine in backwards. )-: Better to fix it now than try to figure out later why the ABS is going bonkers! Good Video
Mulțumim pentru postarea ta. Ai făcut un lucru profesional. Dacă toate serviciile ar fi așa ar fi bine. Te descurci și singur dar tot mai bine cu un ajutor. Salutari din România. Te urmăresc cu placere de fiecare dată!
Как, всегда на профессиональном уровне подача информации! Спасибо большое за проделанную работу! Благодаря тебе мои два Volvo в порядке!!! Так держать 👍🤝
I don't own a Volvo, but it's on the shortlist for my next vehicle. I appreciate the effort put into filming it, the job is work enough just doing it. Subscribed!
Cant believe the rust on your front end. Extreme cold and salt with metal don't mix!! Here in Australia we don't have this issue Great job on the bearings without a hoist. I have used and would have used FAG ( made in Slovakia) from FCP. They give you a lifetime warranty. Your control arms are toast and should have been replaced with this job. I used Lemforder but in this instance Meyle HD is essential I feel Great video
I've done this job on a previous P3. Not a particularly hard job but needs a press if you don't have one at home. I got mine pressed in a local garage.
Good evening, thank you for your lovely videos. I’ve been following you for a long time but once again you’ve used substandard Chinese parts and I did see one of your videos the other month where you was moaning about Chinese parts only buy original. I don’t really understand where you’re coming.🎉
Those lower ball joint bolts are proper pain in backside. When I did mine it took me almost 2 h to get one side off and other side bolt snapped and had to drill it out. Off topic but have you thought about installing 2 piston callipers from XC60 or would it not be worth the hassle?
The ball joint bolt on the passenger side almost broke. Separating was very hard. Been there from day one most likely. Two piston brakes not for me. It works fine just as it is.
Alternative way of telling if your bearing failed is by just grabbing your wheel and try to wiggle it up and down, and if there are movements or play that means you need to replace them. Definitely check on both sides as I replaced my LF (driver side) and not both fronts, and turns out both need to be replaced. Took knuckle off was a very time consuming job so make sure whoever is taking it off and have it pressed in prepare a whole day for this. Few points on the ABS sensor >ABS message will go away shortly after a drive if you did not damage the abs sensor. >Pay attention to the ABS sensor as collision warning equipped cars are different than regular cars.
@@volvosweden Mine has 200k with the sound, so its definitely way overdue. If it's very light then yes you may need the stethoscope. Also just curious could you throw that link for the wheel bearing tool in the descriptions as well?
Very good. I also started to get a bearing sound on my V70 D5 AWD and it sounds like its coming from the front. Where can I buy that tool for pressing the bearing in and out?
There is no way to refill the grease into the bearing? Thank you for the video tutorial. Maybe is possible to add grease through ABS sensor using a needle, based on your video.
Wow you have a lot of surface rust with only 132k km. Mine has less but i have 480k km. I have problem with vibration and stuttering from front to back and vise versa from 1000-1200 rpm when driving i any gear doesnt matter. When idling and in N i can feel vibration on the steering wheel and passenger chair is vibration/moving little bit could that be engine mount or trany mount?
You can also just remove the brake caliper mount with the caliper attached to it, pull it off and slide the caliper over the spring like it's the rotor and zip tie in place. Hope you didn't overpay for that tool, but mine was out of round and needed to be shaved with a dremel in order to use. Despite being a heavy tool, kinda lacking on quality.
Hello from Spain!! First of all, thank you for the videos. Can you please upload a video on how to change trunk hinges on a 2009 xc70? When I open it it goes down by itself thank you very much!!!
@@volvosweden это я понял. Доживём точно. Рычаг-то дотянет, вот шаровая бы на начала стучать в ответ. Особенно при переходах из тепло а холод, и обратно.
It's really great that in your videos you mention if you make a mistake, so others can avoid the same mistake by watching the video. Thank you for the video, and keep up the good work!
I haven't been following your videos as much since I switched car brands, as I needed more seats than just 7. But Volvo is always in my heart, and it's great to come back and watch your videos because you've always been a Volvo lover and you take great care of your car
Thx for the comment. Maybe one day you will be back to Volvo.
Absolutely
Mate...the timing is unreal :) I need to do this job on my xc70 and I was think about it just about when you uploaded the video.
Nice!
Same here. Mine are starting to cause vibrations as well. Perfect timing.
+1 for me xc60 t6 09
Thanks for the info on the backwards seal, I had to go look at mine and I also put mine in backwards. )-: Better to fix it now than try to figure out later why the ABS is going bonkers! Good Video
Mulțumim pentru postarea ta. Ai făcut un lucru profesional. Dacă toate serviciile ar fi așa ar fi bine. Te descurci și singur dar tot mai bine cu un ajutor. Salutari din România. Te urmăresc cu placere de fiecare dată!
Thx!
As usual, well documented and explained.
Excellent video the way you explain the process is so simple to understand please continue 😊
Excellent thanks for showing the mistake. If you can make that mistake we all can.
Как, всегда на профессиональном уровне подача информации! Спасибо большое за проделанную работу! Благодаря тебе мои два Volvo в порядке!!! Так держать 👍🤝
You are a well expert to your Volvo car
Great video and much respect for showing the mistake. Working on my herd of volvos I've made a few too
I don't own a Volvo, but it's on the shortlist for my next vehicle. I appreciate the effort put into filming it, the job is work enough just doing it.
Subscribed!
Much appreciated!
Loving all the videos, very helpful.
Again an excellent documentation. Thank you for that!
Отлично сделано, осталось нижнюю шаровую в последствии заменить для полного счастья.👍
Летом надеюсь весь перед причесать 🤣👍
Добрый день. Если можно ссылочку товара магаза (еБЭЙ) на сьемник.
Thank you for your professional instructional videos.
Cant believe the rust on your front end. Extreme cold and salt with metal don't mix!!
Here in Australia we don't have this issue
Great job on the bearings without a hoist. I have used and would have used FAG ( made in Slovakia) from FCP.
They give you a lifetime warranty.
Your control arms are toast and should have been replaced with this job. I used Lemforder but in this instance Meyle HD is essential I feel
Great video
What a job 🙈 Nice video again super !
Excellent as usual video.
Could you do a very short video in which you show where you normally place the jack stands?
You are not the first one to ask. I will do it! Keep an eye out
Félicitations, excellent travail
I've done this job on a previous P3. Not a particularly hard job but needs a press if you don't have one at home. I got mine pressed in a local garage.
Great work. Keep videos coming. 👍
Good evening, thank you for your lovely videos. I’ve been following you for a long time but once again you’ve used substandard Chinese parts and I did see one of your videos the other month where you was moaning about Chinese parts only buy original. I don’t really understand where you’re coming.🎉
I need to get these modules again, just waiting on my new to me 2011 V70 R Design T6 awd to arrive
I had a problem with vibration and after many trips to the dealer,the last mechanic said it was the tyres,so 4 new ones where fitted.PROBLEM SOLVED.🇬🇧
Any part numbers for the press kit used? Having a hard time finding one with an 82mm bit
Helped me a lot thank you 😊
Well explained !! Great video
And to show the mistake shows your human 🫡
Very informative video. Thank you
Those lower ball joint bolts are proper pain in backside. When I did mine it took me almost 2 h to get one side off and other side bolt snapped and had to drill it out.
Off topic but have you thought about installing 2 piston callipers from XC60 or would it not be worth the hassle?
The ball joint bolt on the passenger side almost broke. Separating was very hard. Been there from day one most likely. Two piston brakes not for me. It works fine just as it is.
Excellent!
Alternative way of telling if your bearing failed is by just grabbing your wheel and try to wiggle it up and down, and if there are movements or play that means you need to replace them. Definitely check on both sides as I replaced my LF (driver side) and not both fronts, and turns out both need to be replaced. Took knuckle off was a very time consuming job so make sure whoever is taking it off and have it pressed in prepare a whole day for this.
Few points on the ABS sensor
>ABS message will go away shortly after a drive if you did not damage the abs sensor.
>Pay attention to the ABS sensor as collision warning equipped cars are different than regular cars.
If what you describe is present it’s an extreme failure of the bearing. I catch mine at the Very beginning of failure.
@@volvosweden Mine has 200k with the sound, so its definitely way overdue. If it's very light then yes you may need the stethoscope. Also just curious could you throw that link for the wheel bearing tool in the descriptions as well?
Look for the tool on eBay: search Volvo bearing tool. You will see it there
Good video. The reason the ball joint didn’t pop sooner was because the hammer you used is too small. A 5lb hammer would’ve done it quicker
Very good. I also started to get a bearing sound on my V70 D5 AWD and it sounds like its coming from the front. Where can I buy that tool for pressing the bearing in and out?
We got it on Ebay
How many Km/ miles on your XC70? I have an 07 S80 with 200k miles on it. I like watching your videos & have done several of your jobs. Thx!
135000 Km at the moment
There is no way to refill the grease into the bearing? Thank you for the video tutorial. Maybe is possible to add grease through ABS sensor using a needle, based on your video.
Thanks from turkiye 👍
Hi. Can you please make a video about where are the lift points on your xc70 and how to manage that correctly depenting on the type of jack used?
Will do my best!
Thank you!@@volvosweden
Don not know why but playing this is out of focus, reset all my settings, done security scan ! nothing worked !
I Wanted so much to watch this !
Yeah see what some water, salt and dirt and debris can do.. I mean everything is so rusty. But you did good changing, replacing it yourself!
Can it disable 4c shocks?
Wow you have a lot of surface rust with only 132k km. Mine has less but i have 480k km. I have problem with vibration and stuttering from front to back and vise versa from 1000-1200 rpm when driving i any gear doesnt matter. When idling and in N i can feel vibration on the steering wheel and passenger chair is vibration/moving little bit could that be engine mount or trany mount?
Canadian cars are all rusty. So much salt on the streets 80% of the time.
Harsh long winters. Also parking the car every night in garage where temperature is warmer and it melts.
Skip those dust protectors. They are not needed.
Feels like true.
❤❤❤❤Thank you
You can also just remove the brake caliper mount with the caliper attached to it, pull it off and slide the caliper over the spring like it's the rotor and zip tie in place.
Hope you didn't overpay for that tool, but mine was out of round and needed to be shaved with a dremel in order to use. Despite being a heavy tool, kinda lacking on quality.
Thx for the tip! The tool was from eBay around 175$ CAD We split the cost with my friend
@volvosweden Glad it worked, some places sell that same tool for wild prices $300+
Hello from Spain!! First of all, thank you for the videos. Can you please upload a video on how to change trunk hinges on a 2009 xc70? When I open it it goes down by itself thank you very much!!!
You also need to remove ABS sensor first! It's too critical to damage.
Its a Ford part
Hmmm that d5t5 sticker… bit funky.
:)
1:33 mosquito sucking your blood :D
Not the only one ;(
Юрий, я бы не стал колотить по шаровой, когда на место ставишь, она итак не в лучшем состоянии. Съёмник ступицы зачотный.
Буду менять рычаги летом 2025. Если доживем :)
@@volvosweden это я понял. Доживём точно.
Рычаг-то дотянет, вот шаровая бы на начала стучать в ответ. Особенно при переходах из тепло а холод, и обратно.
Next time put the new bearing in the freezer for a few days.
Hex 7mm
So many rusted parts. Such a shame
Here many 2009 cars are already junk because of rust. The Volvo is still better condition
Winnipeg salt roads! 😂
You know I guess our climate and roads are brutal for our cars. Here
Спасибо, Юрий!
Из России, - с приветом! 😊
Привет и вам!
@@volvosweden Думаю, что я не один жду этот ролик, на русском языке. 😊
@IRUSIvan все мои видео на двух языках
Замена передней ступицы Volvo XC70 T6 P3 Платформа
ua-cam.com/video/RswTstkTwlg/v-deo.html
@IRUSIvan Замена передней ступицы Volvo XC70 T6 P3 Платформа
ua-cam.com/video/RswTstkTwlg/v-deo.html
Every video you do is greate.🤌👍