Hi I have been installing Toto toilets for over 15 years. I noticed how you installed the bolts through the holes in the tank. First I install rubber washer on the bolt, no washer on the inside of tank. Then install the bolts through the tank. On the underneath slide a washer then a nut. Then tighten the nut to the tank using deep socket. I noticed you put the washer in the inside of tank. One washer should be between the tank and bowl and the other set under the bowl. This secures the bolt to the tank before securing tank to bowl giving a more solid connection between tank and bowl. I noticed you had a extra set of nuts at the end. The instructions I think show this process. I have never had to plunge a Toto toilet in 15 years. They are great
Nice man. Not busting your balls but the rubber washers 100% go inside the tank. A metal washer won't make a seal. It's like a fill valve, rubber washer goes in the tank
@@pershingplumbing9007 I understand the rubber washer goes on the inside. You installed the metal washer over the rubber washer inside the tank. The metal washer with the nut secures the bolt to the tank between the tank and bowl. This is why they supply 4 washers and 4 nuts. The other pair of washers and nuts goes under the bowl. I like they way Toto secures the bolt to the tank before your secure tank to the bowl. The tank doesn't wiggle as much. Also less apt to develop a leak over time.
While it's definitely not how Toto expects the tank bolts to be attached there's no reason it won't work as almost every other toilet does it this way.
I agree , it just makes the tank more stable and less apt to leak in the future. Also I think the rubber washer seats better with a nut and washer on the bottom of the tank. @@dirksteinn
Yes the bolt the rubber washer through the tank then flat washer then nut tighten then install tank on bowl then another washer and nut , if you put the washer on then the rubber washer water can leak between the metal washer and bolt even though the rubber washer is against the tank.n
Many plumbers recommend the water tank be attached in the following way : bolt, rubber washer, underneath, rubber washer steel washer, nut. Is the Toto different?
I had an old Delta 1.28 gpf. The flush power was pretty power. I bought American Standard Cadet 3 toilets. They are a very huge improvement. Great bowel rinse and flush power.
The japanese sure know a thing or two about pooping. I've got two Totos and can confirm these bad boys can flush. One of them handled 4 matchbox sized cars in one go 🤣
Hi... might you please tell me what the difference is between the two? I'm on their website trying to see any difference and they have the same stats and tech. Thanks for any help in advance!
@@ferrugenfish My wife says the Drake 2 is better, I can't tell. I had to order, the Drake from a special store, because of color, couldn't find a Drake 2 in the color. They are both great.
I always use a ratchet and deep well sockets for toilet bolts, tank and closet. I use 5/16 closet bolts and cut them with a cordless Dremel tool. I never use the plastic snap on for closet bolt caps, but use plumbers putty instead.
Just installed two Drakes in as many months in my home - both flushing like champs so far; both the flush and refill is fast. A different plumber installed each one and both plumbers, unprompted and coincidentally, said "that's a nice toilet" after the install was done. Hoping they are right and the naysayers on the interwebs are wrong...
I found this video because I was looking for the difference between the Drake and the Drake II. I had heard that the Drake is the best flushing toilet... so is the Drake II just a slight updated version? The Toto website doesn't help at all. By chance have you heard of the Drake II and know the/any difference?
I work in Showroom sales and sell TOTO toilets. The Drake II is the newer model. Toto will eventually (soon) stop making the Drake. All their models will eventually be made so that if someone wants to add an electric bidet seat (Toto calls them WASHLETS) the customer will be able to (As long as they install an electrical outlet behind near the toilet). The Washlet ready toilets basically come with a hole on the left side that allows for the wires/hose of the Washlet seat to go down directly and not to the side as with older models. If the customer doesn't buy a Washlet seat, TOTO makes a soft close seat designed to hide/cover that hole.
I promise you It doesn’t flush as good as a vintage American standard toilet. I have a 1957 American standard Compton that flushes way better than a TOTO drake.
@@ToothlessThedragon9 they make residential wall hung toilets. They have a tank that attaches to the bowl just like a regular toilet. They attach to the wall carrier which it is anchored to the carrier with 4 bolts
Same, my Drake is only a year old and I've had so many problems with it. It's only "fine" in my book. I only ever see praise on UA-cam or Reddit for it. Sigh
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
"Damn, that is a good looking toilet!" Yup.
The toilet swap out / install videos never get old! Thanks for sharing!
Hi I have been installing Toto toilets for over 15 years. I noticed how you installed the bolts through the holes in the tank. First I install rubber washer on the bolt, no washer on the inside of tank. Then install the bolts through the tank. On the underneath slide a washer then a nut. Then tighten the nut to the tank using deep socket. I noticed you put the washer in the inside of tank. One washer should be between the tank and bowl and the other set under the bowl. This secures the bolt to the tank before securing tank to bowl giving a more solid connection between tank and bowl. I noticed you had a extra set of nuts at the end. The instructions I think show this process. I have never had to plunge a Toto toilet in 15 years. They are great
Nice man. Not busting your balls but the rubber washers 100% go inside the tank. A metal washer won't make a seal. It's like a fill valve, rubber washer goes in the tank
@@pershingplumbing9007 I understand the rubber washer goes on the inside. You installed the metal washer over the rubber washer inside the tank. The metal washer with the nut secures the bolt to the tank between the tank and bowl. This is why they supply 4 washers and 4 nuts. The other pair of washers and nuts goes under the bowl. I like they way Toto secures the bolt to the tank before your secure tank to the bowl. The tank doesn't wiggle as much. Also less apt to develop a leak over time.
While it's definitely not how Toto expects the tank bolts to be attached there's no reason it won't work as almost every other toilet does it this way.
I agree , it just makes the tank more stable and less apt to leak in the future. Also I think the rubber washer seats better with a nut and washer on the bottom of the tank. @@dirksteinn
Yes the bolt the rubber washer through the tank then flat washer then nut tighten then install tank on bowl then another washer and nut , if you put the washer on then the rubber washer water can leak between the metal washer and bolt even though the rubber washer is against the tank.n
Many plumbers recommend the water tank be attached in the following way : bolt, rubber washer, underneath, rubber washer steel washer, nut. Is the Toto different?
With that gap from tank to wall, you definitely should have used a 12” rough in.
I had an old Delta 1.28 gpf. The flush power was pretty power. I bought American Standard Cadet 3 toilets. They are a very huge improvement. Great bowel rinse and flush power.
I have a delta prelude. They are great. The American standard vormax will be my next one.
If you are rinsing your bowels with a toilet, you've installed the water line in the wrong place!
Nice job. I use multi tool to cut bolts. Getting too old to man beast stuff anymore, lol.
The best flushing toilet and you skipped the only part I wanted to see. The flush!
lol my bad man
The japanese sure know a thing or two about pooping. I've got two Totos and can confirm these bad boys can flush. One of them handled 4 matchbox sized cars in one go 🤣
🤣
Box says made in Vietnam.
@@stoker20 my Chevy says hecho en Mexico, your point?
Hi I put a Toto Drake 2 in four years ago, and a Toto Drake in last year, love them both.
Hi... might you please tell me what the difference is between the two? I'm on their website trying to see any difference and they have the same stats and tech. Thanks for any help in advance!
@@ferrugenfish My wife says the Drake 2 is better, I can't tell. I had to order, the Drake from a special store, because of color, couldn't find a Drake 2 in the color. They are both great.
@@ferrugenfishDrake 2 has the coating on the porcelain, IIRC.
It pains me to see plumbers use pliers on all fasteners. For Pete's sake, you chuckleheads deal with like FIVE fastener sizes. Own a wrench already!
Toto is known for making the best bidet toilets. Has a customer ever asked to install a bidet?
I always use a ratchet and deep well sockets for toilet bolts, tank and closet. I use 5/16 closet bolts and cut them with a cordless Dremel tool. I never use the plastic snap on for closet bolt caps, but use plumbers putty instead.
I do that sometimes too
All agreed with except: what happens when the putty dries up?
I’m only getting pressure assisted toilets from now on
Just installed two Drakes in as many months in my home - both flushing like champs so far; both the flush and refill is fast. A different plumber installed each one and both plumbers, unprompted and coincidentally, said "that's a nice toilet" after the install was done. Hoping they are right and the naysayers on the interwebs are wrong...
seems like those big water channels at the lip would get filthy and no easy way to clean??
Did you ever see an American Standard Vormax?
Nah never seen one
thxs for sharing...
i use the lennox tiny tim saw. the toilet will clog, it just wont clog the siphon jets because of the design, just augered one today
The toto doesn't stand a chance against big dookies
Couldn’t see the flushing action but it sounded kinda weak 🤷🏽♂️
I found this video because I was looking for the difference between the Drake and the Drake II. I had heard that the Drake is the best flushing toilet... so is the Drake II just a slight updated version? The Toto website doesn't help at all. By chance have you heard of the Drake II and know the/any difference?
I believe Drake II is 1.28 gpf vs Drake 1.6 gpf.
I work in Showroom sales and sell TOTO toilets. The Drake II is the newer model. Toto will eventually (soon) stop making the Drake. All their models will eventually be made so that if someone wants to add an electric bidet seat (Toto calls them WASHLETS) the customer will be able to (As long as they install an electrical outlet behind near the toilet). The Washlet ready toilets basically come with a hole on the left side that allows for the wires/hose of the Washlet seat to go down directly and not to the side as with older models. If the customer doesn't buy a Washlet seat, TOTO makes a soft close seat designed to hide/cover that hole.
Johni fast set bolts are simple and no cutting bolts and reusable
Yeah I think the drake is the best toilet to and is a pretty good price
$287 hard to beat
how about toilet mold? easy to clean?
To the guy complaining about using the wrong mount go use a porta-potty😢😢😢
Toto in dominican spanish it vagi@#$a
Seriously? Dam
In Singapore meanwhile it's the name of 1 of the national lotteries
Heck nah
I promise you It doesn’t flush as good as a vintage American standard toilet. I have a 1957 American standard Compton that flushes way better than a TOTO drake.
However in my new house I have a wall hung Mansfield quantum pressure assist with a flushmate.
@@becplumbing660 Say whaaaaaat????? How can a wall hung toilet be in a house??
@@ToothlessThedragon9 they make residential wall hung toilets. They have a tank that attaches to the bowl just like a regular toilet. They attach to the wall carrier which it is anchored to the carrier with 4 bolts
@@becplumbing660 Most are a washdown flush which people will have to adjust to their characteristics. I have a Toto MH.
@@stoker20 mine isn’t. It has a close coupled tank
I like your caulk!... Sorry! I had to!
I hate Toto mine constantly clogs and it’s not even a year old I have a Kohler in another bathroom that 3 years old and it’s clogged maybe once
Kohler is just too difficult to work on
Same, my Drake is only a year old and I've had so many problems with it. It's only "fine" in my book. I only ever see praise on UA-cam or Reddit for it. Sigh
@@YTMsux Toto’s overrated in my opinion why spend the money on a Toto when you can simply go to Lowe’s and buy a toilet that’s cheaper and better!
Gerber Avalanche for the win. Best toilet 🚽
@ I don’t know about that.. I’ve seen a $99 project source outperform those
American Standard Champion 4 is the best