Getting RID of the worst section of my Carrera Digital Spirit of Speed layout. Front straight bonus!
Вставка
- Опубліковано 25 сер 2024
- I ended up needing only 3 60deg turns and was 1 standard straight short so I now have a nice long front straightaway for some full throttle action!
If you really want to enjoy your awesome track I suggest getting it up off the floor. I bought a couple of cheap bed frames on Amazon and cut Extruded polystyrene XPS to fit. No plywood. Its extemely light. Easy to move. My knees have thanked me. Great video.
Thank you that's an excellent idea. I need to pick it all up to vacuum anyway😂. Might just try that. Thanks for watching 🤙🏼
Nice job Ted, now you are like me bringing back this fun hobby. The first slot car I owned was a formula one then I had the famous Aurora brand ones, that was such a fun track and cars. We are going back to the earliest 70s 😊. Take care my friend. Otto
I definitely started in the mid 60s with an old Eldon set and two lotus open wheel formula 1 cars. Kept me occupied for hours. Cheers!
Looks great and a lot of fun! Thanks for sharing and enjoy it!
Yep, and I'm really enjoying the long straight away!
Thats a great track, i love long straights, i wish i had that much space thanks for sharing.
Yes, this new layout has doubled the fun factor, thanks for watching!
Nice layout looks like your doing it right by having FUN
Autorennbahnplaner is definitely a great program which helps to take the "hit & miss" out of track design. I would suggest that you get the track off the carpet onto a table, or rubber matting underneath it to stop the detritus from the carpet getting sucked into the interiors and motors of your cars. Nice simple layout to drive upon.
Oh how I would love to get that track up off the floor, but unfortunately that's not in the cards at this time. Eventually I will be moving to another location where that will be possible, but until then I'm just going to have to use my Swiffer duster before each use 😆. I'm not sure if I can find a rubber mat quite as large as the track, but your idea got me to thinking about possibly some large sections of cardboard that could be slid under without disturbing things too much. Otherwise I have to do routine car maintenance a little more often 🤦♂️ Cheers!
Sections of cardboard should do the job. The matting I was suggesting is made up of 600 x 600 mm interlocking pieces that come in packs of six, and by removing the outer edges you can lock them together to provide a base to put your track down on.
@@markphillips5368 that is a great idea and they're fairly cheap at harbor freight. I know the ones. Thanks again!
Maybe that interlocking flooring they make for garages could work. My layout will also be on the floor, but it will be sitting on 1/2" plywood and then a putting green surface on top of the plywood.
@@CarreraTrackOntheFloor yeah I think if it is going to be a permanent location then definitely some plywood underneath would help. In my case, I'm not staying too much longer at this house and the new place will have plenty of room for an even bigger layout 👍🏼
Cool ! I like your track set-up. I just found you tonight. Subbing. If you don't mind me asking, how long is that track? And how wide, at it's longest point? I'm about to get started pretty soon I think, with a set-up. I need to get some plywood... and start planning. And wondering how long and wide that is - as a reference point.
It's 14ft 10in X 6ft 7in which gave me a nice long 12ft straight!
Glad you like it, thanks for watching 🤙🏼
@@blackpearlvoyager4174 Thanks! I'm going to be gong with a 5X12 set-up for now. That's all the room I can muster up for the moment. But I think I can do something cool with that. Thanks for the great response!
@@jimmyz2098 anytime 🤙🏼
4K views? Dang! Good on you Ted!
awesome.God bless.
Thanks! Merry Christmas to you and yours.
I prefer the look of your new track. I have a carrera track also, and I have an F1 that de slots on an S bend. I plan on getting more F1 cars but this time with magnets.
Cheers
The Carrera formula ones all have pretty good magnets if you can find them. I was surprised to find that the NSR formula cars also have magnets, but they're pretty small and they make for a challenging race. They are very different to drive, makes for interesting racing. Thanks for watching!
Nice improvements, i dont care for the quick up and downs on overpasses either
Yes, that whole layout is somewhat flawed, especially when you start adding features to it without making other changes. It finally got to the point where I had to do something 😆
The only time overpasses have ever worked is when they are in fully landscaped track layouts that made the over or underpasses look natural. You are right about the use of overpasses. I like your layout and I would like to duplicate it as much as possible. In fact maybe we could do some comparisons on track lap times. I have always wondered why there isn't a group of track owners that have the same exact track layouts so they could compare the lap times. Anyway nice video! What is your over all width and length of the layout you set up?
The track layout ended up being about 6 ft 7 in (2m) wide along the narrow dimension by about 14 ft. 10 in (4.5m) on the long dimension which made for a nice long front straight away.
That makes it 41 ft 6 in around and as it turns out the lanes are almost equal distance mismatched by only a few inches. That should make for really competitive lap times in either lane. It's been great so far for the room that I have, but it's still a bit larger than two sheets of plywood and would need a custom-sized table to set up on. Good luck and let me know how you like it. When you get it built. I'd be happy to share some lap times with my fastest cars. Cheers!
@@blackpearlvoyager4174 I wish I could fit that size in my small garage! Looks like I will have to go around 5 1/2 by 12 feet to have any room. Anyway keep on providing us good videos! Thanks🤠
@@lewbrooks8935 I'll try! Thanks for watching.
@@blackpearlvoyager4174😂
Maybe I missed it but was is the overall footprint of your layout?
It's 14'10" by 6'7". Pretty big for the space. Thanks for watching!
I am just starting out and just purchased the Autorennbahnplanner software. Would you be willing to share your track file ? Thanks
Sure thing. If I can figure out how 😂
I'll do my best and DM you?
Got the file but no way to send it in a reply. Not sure if you're on IG. I'll need an email or a DM on IG page. Lemme know how you want to receive it.
You need to add at least one more crossover. 2 more would be perfect.
Do you mean crossover as in lane change or overpasses? 😆😆
I'm still trying to decide where to put the double lane change. Even now. It actually affects the top speed along the front straight away when the cars lose power across the bare spots.
Thanks for the suggestion, but I think I will wait to add more lane changers when I build a much larger track. Thanks for your suggestion and for watching!
Lanechangers.
Can’t make my mind up, 132 or 124 scale cars, which are you running on your track?
Both actually, I run mostly 1:32 but the track scale is 1:24 and so it can accommodate the oversize 1:24 cars. That's one of the nice things about Carrera digital.
I have two Ford GT40 Mk 2s that I like to race with someone every once in a while. I am still looking for a Ferrari 330 P3 in 1:24 scale but have still yet to find one.
The Carrera 1:24s are a bit more rare, less common I guess, but they're still out there and there are collectors and they do make for fun racing 🤙🏼
Thanks for watching and have fun!
Where did you get the Dunlop bridge?
Actually, I built that from a kit that is offered by a company called magneticracing.com. it's a UK company but they have a really good website and if you like assembling and painting your own advertising structures for for your slot car track this is a great place to go. Thanks for watching!
@@BPSlotRacing Thanks for the tip.
@@CarreraTrackOntheFloorthere is one big downside. Sometimes shipping from the UK exceeds the price of the item, just sayin' 😬
@@BPSlotRacing Yes that's always a big part of the price you have to consider.
You can get the Dunlop Bridge on E-Bay pretty cheap. Just the bridge - minus the digital lap-counter. If you just want the bridge. I have it - just the plain bridge. And I love it. A nice little (cheap) addition to a track. Not quite as nice as this one. More generic. But still looks great. It's all set up and ready to go - out of the box.