They are called “torsion axles” and I think these were 500lb ones, they usually run for 300 - 500$ online. I’ll post a link to one similar for you. They are sick. Make sure to get the right hubs so that the number of holes on the wheels is correct, there are 4 and 5 holes RIGID HITCH INCORPORATED 500 lb. Torsional Stub Axles with 4-Bolt on 4 Inch Hubs (TSA-5100) a.co/d/hd85u62
Thanks! It’s rough in spots but I’m working on it the rest of the week, making progress. I went with 30”x 74” , it was the best fit for me, I can fully lay down that way, I’m putting 1.5” foam panels in the open spaces under the decking, I’m surprised how fast it’s coming together. Question..is it feasible to install electric brakes on these spindles? They have spots for them but I couldn’t find any online
@@JMERCHRIDES I've never put electric brakes on a motorcycle trailer. Check with Redneck Trailer Supplies out of Normal Illinois. If anyone would know about small scale electric brakes it would be them. (www.redneck-trailer.com/) The insulation sounds like a great idea. I would cover it to protect it from road debris and moisture.. What are your thoughts on access to the interior, doors, window, etc?
@@bryanirwin5473 everywhere I’ve been looking the minimum load for the electric brakes is in the 2000lb range and higher so I’m contemplating designing some disc brakes, very small, either hydraulic or cables, like on a go kart, atv, or moped, it might be better to have physical brakes so they don’t stick on, and are much more reliable and serviceable on the go. I’m not sure if it can be done on this particular setup, I may need to add a spacer or something. But it would so much cheaper. I have access to a lot of disc brake parts here for free
@@JMERCHRIDES Adapting a brake system from a golf cart could be a way to go. Golf carts have been equipped with disc brakes for years. The cable drum brakes on my Taylor Dunn Tram are prone to lock up under hard braking conditions, but it weighs 1200 lbs. Designing a surge system for that would be interesting.. Throw a piece of plywood on the trailer to make a deck and then add weight to it. It will help you find a balance you're comfortable with..
Thanks for thinking of me 🙏 it held up well on the trip until I gave it to a gentleman at beanpot campground in Tennessee. No issues with the frame whatsoever, I towed it about 1500 miles on lots of different terrain and had a fun time with it, but ultimately I didn’t really like towing a trailer all that much to be honest
Coming along nicely!
Thanks B! I’m working on it every day until Monday next week so I’ll make another one Sunday I’m sure. Peace ✌️
Man, it’s really slick to watch it take shape.
Let’s see them skills Merch !! Keep up the good work
Thanks Frank, my fabrication skills are not the best but I’m trying to learn as much as I can to make it strong and safe. ✌️
Jack of all trades! Pretty impressive bro!👍! I wish I could get welding down a bit better, you made it look easy peasy man! Good job👌💯
So you didn't see the cold lap and poor penetration?
Awesomeness in progress 👍👍 Nice job man, thanks for the sneak peak. ✌✌
I always appreciate the positivity my friend 🤜🤛✌️
Wow Merch is the jack of all trades ... Plus he knows how to grow good weed.
What’s up my friend hope all is well ✌️
Them editing skills coming along. I see those lil rewind reverse welds mixed with slow mo
Thanks dude, I think watched too much Grind Hard Plumbing Co. in the past lol 😂
Looking good! 🤘
For real Merch much love brother.
Thanks for watching Johnny
nice work man!
My man Merch got some serious skills
Can't wait to see this finished product Merch✌🏻
What you call the wheels setup. No spring or shocks you just bolted it on.
They are called torsion axles, they are awesome, they use rubber inside to dampen
What did you use for the axels?? I can't find them anywhere
They are called “torsion axles” and I think these were 500lb ones, they usually run for 300 - 500$ online. I’ll post a link to one similar for you. They are sick. Make sure to get the right hubs so that the number of holes on the wheels is correct, there are 4 and 5 holes
RIGID HITCH INCORPORATED 500 lb. Torsional Stub Axles with 4-Bolt on 4 Inch Hubs (TSA-5100) a.co/d/hd85u62
😎
🤜🤛
❤✌🏻👊🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Great looking frame!! What dimensions did you decide on?
Thanks! It’s rough in spots but I’m working on it the rest of the week, making progress. I went with 30”x 74” , it was the best fit for me, I can fully lay down that way, I’m putting 1.5” foam panels in the open spaces under the decking, I’m surprised how fast it’s coming together.
Question..is it feasible to install electric brakes on these spindles? They have spots for them but I couldn’t find any online
@@JMERCHRIDES I've never put electric brakes on a motorcycle trailer. Check with Redneck Trailer Supplies out of Normal Illinois. If anyone would know about small scale electric brakes it would be them. (www.redneck-trailer.com/) The insulation sounds like a great idea. I would cover it to protect it from road debris and moisture.. What are your thoughts on access to the interior, doors, window, etc?
@@bryanirwin5473 everywhere I’ve been looking the minimum load for the electric brakes is in the 2000lb range and higher so I’m contemplating designing some disc brakes, very small, either hydraulic or cables, like on a go kart, atv, or moped, it might be better to have physical brakes so they don’t stick on, and are much more reliable and serviceable on the go.
I’m not sure if it can be done on this particular setup, I may need to add a spacer or something. But it would so much cheaper. I have access to a lot of disc brake parts here for free
@@bryanirwin5473 I’m going to put a door on, and a bubble window I think, but I’m going to tackle that as it comes
@@JMERCHRIDES Adapting a brake system from a golf cart could be a way to go. Golf carts have been equipped with disc brakes for years. The cable drum brakes on my Taylor Dunn Tram are prone to lock up under hard braking conditions, but it weighs 1200 lbs. Designing a surge system for that would be interesting.. Throw a piece of plywood on the trailer to make a deck and then add weight to it. It will help you find a balance you're comfortable with..
Where did you find the wheel hubs?
I got them from northern tool
Time to start ur custom trailer co. 🤑
🤙🤘
👍
✌️
Pigeon poop..lol jk looks pretty good Shipmate... 👍
#CANCERSUCKS
Lol 😂 ✌️✌️
Much More than a grower
@ 0:55 the welds look pretty scary. If your trailer ever strikes something hard those welds will come apart. You had extremely poor penetration.
Thanks for thinking of me 🙏 it held up well on the trip until I gave it to a gentleman at beanpot campground in Tennessee. No issues with the frame whatsoever, I towed it about 1500 miles on lots of different terrain and had a fun time with it, but ultimately I didn’t really like towing a trailer all that much to be honest