Do you not know how to disassemble and reassemble your iPhone 6 Plus? No need to worry. This guide is easy to follow and will demonstrate step by step how to safely take your device apart and put it back together.
Suggested tools 0:21 Dissassembly begins at 1:03 Display removal 1:48 Front facing camera and ear piece 2:25 Home button 2:54 LCD back plate 3:21 Battery 4:14 Sim card and tray 5:11 Rear facing camera 5:19 Power and volume connections and antenna 5:41 Dock port connection and vibration motor 6:19 Motherboard 7:02 Loudspeaker 8:06 Dock port and headphone jack assembly 8:17 Small antenna 9:32 Volume buttons 9:44 Power button assembly and camera flash 10:05
pulpbits Apple are smart. I think they knew the rear camera would fail (as mine and many have), so they purposely made it the second easiest thing to remove after the screen.
Wanted to just see the internals of the iPhone 6... incredible technologies, I wonder how its manufactured, all the tiny little plugs/ribbon cables. Such precision. Incredible how technology has advanced.
Broke my Touch ID, but the phone is in a new custom housing and I’m happy, wonderful guide! I was happy you said something about that super tiny piece on the right side of the rear facing camera, I couldn’t figure out how it went on
Thanks for this video... Its so detailed. I was watching this while taking the motherboard out of my BF's broken Iphone 6. I am just wondering if there is any company you know of that retrieves any data on the motherboard for a Iphone 6?
As a recommendation for ***** for those who will use this video as a tutorial, not just to check how it looks (like me) You should put each disassebly in the description, e.g Screen disassemble, etc
hi there please help! i try to change my iphone 6 back housing, after done switch it. Plugging to charge 15 minutes later my phone getting extremely hot. and came to this state " phone will die out when go to sleep the only way to power it back up i have to reconnect the battery connector from a mother board. Or manually turn off when not in use, then i can turn back on by a power button".
+Jamal Hill Ensure your flex cable connections are properly seated. You can also perform a hard reset by holding the power button and home button for 10 seconds. If the issues continue, it's possible you have a bad digitizer on your new screen assembly.
dude thanks! just to ask if you know. My phone seems have flicker on top. I plan to complete assemble and dissable. The wierd things is when i put the phone to aircond air, the flickering slowly dissapear. i strongly think it is due to bad thermal paste on the chips. do you have any idea how to remove the heatsink on the chips? if any? Thanks!
+A Farhan This sounds like an issue on your LCD. Double check that your flex cables are seated properly. Possible that there is a faulty connection and not to sure if this would be related to the thermal paste. This problem sounds more consistent with an LCD related issue.
+Fixez.com Hi dude, thanks! i did try with new lcd assembly (complete), and the screen still flickers. my guess is either connector on the logic board, or something related to heat, since flexing the phone or cooled down the phone make the flicker disappears. well u got some parts too. do you ship to worldwide?
We offer worldwide shipping. Feel free to move forward through our site and you will see a shipping calculator to get an estimated cost before completing the purchase. www.fixez.com/store/iphones/iphone-6-plus
You're very wrong always unclip the battery first when working on a mobile Either it's on or off And removing from a clip with a metallic object (tweezers) while the battery is connected is dangerous alot of things can be burned this way
Do you not know how to disassemble and reassemble your iPhone 6 Plus? No need to worry. This guide is easy to follow and will demonstrate step by step how to safely take your device apart and put it back together.
Suggested tools 0:21
Dissassembly begins at 1:03
Display removal 1:48
Front facing camera and ear piece 2:25
Home button 2:54
LCD back plate 3:21
Battery 4:14
Sim card and tray 5:11
Rear facing camera 5:19
Power and volume connections and antenna 5:41
Dock port connection and vibration motor 6:19
Motherboard 7:02
Loudspeaker 8:06
Dock port and headphone jack assembly 8:17
Small antenna 9:32
Volume buttons 9:44
Power button assembly and camera flash 10:05
pulpbits Apple are smart. I think they knew the rear camera would fail (as mine and many have), so they purposely made it the second easiest thing to remove after the screen.
Bits of Pulp YOU ARE A GOD
Thank u
Wanted to just see the internals of the iPhone 6... incredible technologies, I wonder how its manufactured, all the tiny little plugs/ribbon cables. Such precision. Incredible how technology has advanced.
its a machine that places them on the pcb then its heated, melting all the solder to the board, the same with the ribbons, there done in the same way
Broke my Touch ID, but the phone is in a new custom housing and I’m happy, wonderful guide! I was happy you said something about that super tiny piece on the right side of the rear facing camera, I couldn’t figure out how it went on
i gonna like this video because of step by step procedure... even too long! thanks buddy
+ElecTroMan DIY AMPLIFIER We appreciate all the support and thank you for the feedback!
والله العظيم انت مهندس شكرا ليك من كل قلبي على الشغل الالى ده ..
amazing build quality compared to the Samys i usually fix.
***** Hello I was wondering are the screws the same on iPhone 6 and iPhone 5/5s?
Exactly what I needed. I'll be making a couple purchases from your website! Ty
You're welcome. If you need any assistance, do not hesitate to contact us.
Thank you
very nice hand skill and lovely voice ;)
Thanks for this video... Its so detailed. I was watching this while taking the motherboard out of my BF's broken Iphone 6. I am just wondering if there is any company you know of that retrieves any data on the motherboard for a Iphone 6?
As a recommendation for ***** for those who will use this video as a tutorial, not just to check how it looks (like me)
You should put each disassebly in the description, e.g Screen disassemble, etc
Thank you for this video. It is very detailed and to the point.
+Jorge Portillo Thanks for watching.
Hey! So after screen replacement my 6+ battery is just horrible. And the phone gets hot too.
"single phillips screw" theres two different sizes and some with wider heads
Great video, Screen replacement shown to be super simple.. but God forbid you switch the entire housing. Ruined my OEM battery.. :(
do you have any video about a broken screen of a UMI ROME X?
Unfortunately, not at this time. We will provide this request to our team. Stay tuned to our channel for any updates.
Hi, my iphone sim card slot/drawer wont open, i think it is stuck and i don't know how to fix this it is so depressing. i hope you could help me. :(
hi there please help!
i try to change my iphone 6 back housing,
after done switch it. Plugging to charge 15 minutes later my phone getting extremely hot. and came to this state " phone will die out when go to sleep the only way to power it back up i have to reconnect the battery connector from a mother board. Or manually turn off when not in use, then i can turn back on by a power button".
Great😮
i got my digitizer and screen replaced all parts perfectly flush screen comes on and looks perfect but the touch screen is unresponsive. any ideas?
+Jamal Hill Ensure your flex cable connections are properly seated. You can also perform a hard reset by holding the power button and home button for 10 seconds. If the issues continue, it's possible you have a bad digitizer on your new screen assembly.
I always wonder how powerful smart phones could be if they had a battery that could last a week of full usage that was the size of a small sd card
what part was that a 7 minutes in??
They have taken off the ribbon cable for the touch id
Great video, thanks
+TechTuber Thank you for watching!
dude thanks!
just to ask if you know. My phone seems have flicker on top. I plan to complete assemble and dissable.
The wierd things is when i put the phone to aircond air, the flickering slowly dissapear. i strongly think it is due to bad thermal paste on the chips.
do you have any idea how to remove the heatsink on the chips? if any?
Thanks!
+A Farhan This sounds like an issue on your LCD. Double check that your flex cables are seated properly. Possible that there is a faulty connection and not to sure if this would be related to the thermal paste. This problem sounds more consistent with an LCD related issue.
+Fixez.com Hi dude, thanks!
i did try with new lcd assembly (complete), and the screen still flickers. my guess is either connector on the logic board, or something related to heat, since flexing the phone or cooled down the phone make the flicker disappears.
well u got some parts too. do you ship to worldwide?
We offer worldwide shipping. Feel free to move forward through our site and you will see a shipping calculator to get an estimated cost before completing the purchase. www.fixez.com/store/iphones/iphone-6-plus
You're very wrong always unclip the battery first when working on a mobile
Either it's on or off
And removing from a clip with a metallic object (tweezers) while the battery is connected is dangerous alot of things can be burned this way
Cool thanks
thk sharing!
Awesome
Thanks for the video!
Can I have the extra screen please
the phone is made of metal, why don't you just heat the bottom under where the battery is? the battery does not enjoy being heated!
The battery gets hot on usage anyway
its lithium based, all phone's have lithium based batteries, its a chemical reaction, there will be heat.
and that doesn't help removing the battery...
The most times while removing the battery there will be an replacemend
urm... you sure? I've removed batteries from 5c's and 4-4s's and was able to reuse it? what do you do to yours...
Yup. No gold in your 800 dollar phone
ez fix
Excellent quality smartphone. But shity ass crap apple iOS !! i hope apple makes their smartphones with Android someday
you can install android in a iphone. like you can install ios in a adroid phone.
hope this will help you